Low Input Bias Current, Wide BW JFET Precision Dual Op Amp Features: Low Noise 6 nV/√Hz Low Offset Voltage: 100 µV Max Low Input Bias Current 10 pA Max Fast Settling: 600 ns to 0.01% Low Distortion Unity Gain Stable No Phase Reversal Dual-Supply Operation: ±5 V to ±13 V

8-Bit, 1 GSPS, JESD204B, Quad Analog-to-Digital Converter Features:JESD204B (Subclass 1 and Subclass 0) coded serial digital outputs Lane rates up to 15 Gbps 1.6 W total power at 1 GSPS 400 mW per ADC channel SFDR: 71 dBFS at 611 MHz (1.44 V p-p input range) SNR: 48.6 dBFS at 611 MHz (1.44 V p-p input range) SINAD: 48.5 dBFS at 611 MHz (1.44 V p-p input range) 0.9 V, 1.8 V, and 2.5 V dc supply operation No missing codes Internal ADC voltage reference Analog input buffer On-chip dithering to improve small signal linearityFlexible differential input range 1.44 V p-p to 2.16 V p-p (1.44 V p-p default) 1.4 GHz analog input full power bandwidth Fast detect bits for efficient AGC implementation Differential clock input Integer clock divide by 1, 2, 4, or 8 On-chip temperature diode Flexible JESD204B lane configurations

MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC Features:Flexible reconfigurable common platform design 4 DACs and 2 ADCs (4D2A) and 2D2A options Supports single, dual, and quad band Datapaths and DSP blocks are fully bypassableDAC to ADC sample rate ratios of 1, 2, 3, and 4 On-chip PLL with multichip synchronization External RFCLK input option for off-chip PLL Maximum DAC sample rate up to 12 GSPS Maximum data rate up to 12 GSPS using JESD204C Useable analog bandwidth to 8 GHz Maximum ADC sample rate up to 6 GSPS Maximum data rate up to 6 GSPS using JESD204C Useable analog bandwidth to 8 GHz ADC ac performance at 6 GSPS, input at 2.7 GHz, 1 dBFS Full-scale input voltage: 1.475 V p-p Noise density: 147.5 dBFS/Hz Noise figure: 25.3 dB HD2: 72 dBFS HD3: 68 dBFS Worst other (excluding HD2 and HD3): 78 dBFS DAC ac performance at 12 GSPS, output at 2.6 GHz Full-scale output current range: 6.43 mA to 37.75 mA Two-tone IMD3 (6 dBFS per tone): 72 dBc NSD, single-tone: 160 dBc/Hz SFDR, single-tone: 75 dBc Versatile digital features Selectable interpolation and decimation filters Configurable DDC and DUC 8 fine complex DUCs and 4 coarse complex DUCs 8 fine complex DDCs and 4 coarse complex DDCs 48-bit NCO per DUC or DDC Option to bypass fine and coarse DUC/DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Programable delay per data path Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Fine DUC channel gain control and delay adjust Coarse DDC delay adjust for DPD observation path Auxiliary features Fast frequency hopping Direct digital synthesis (DDS) Low latency loopback modes (receive datapath data can be routed to the transmit datapaths) ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Flexible GPIO pins TDD power savings option SERDES JESD204B/JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JT×) and 8 lanes JESD204B/C receiver (JR×) JESD204B compliance with the maximum 15.5 Gbps JESD204C compliance with the maximum 24.75 Gbps Supports real or complex digital data (8-, 12-, 16-, or 24-bit) 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

Dual Low Power, High Speed JFET Operational Amplifier Features: Low supply current: 250 μA/amp maximum High slew rate: 9 V/μs Bandwidth: 3.5 MHz typical Low offset voltage: 1 mV maximum @ 25°C Low input bias current: 20 pA maximum @ 25°C CMRR: 90 dB typical Fast settling time Unity gain stable

LTC2256-12 series 12 Bit 25M Samples per Second Analog to Digital Converter (ADC) Evaluation Board

Isolated Module DC DC Converter 1 Output 2.5 ~ 12V 440mA 3.1V - 31V Input

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA 8-MSOP

Encoders, Decoders, Multiplexers & Demultiplexers 2:1 Mux w/half rate clock

HBT Vector Modulator SMT, 1.8 - 2.2 GHz Features: Continuous Phase Control: 360°  Continuous Gain: 40 dB Control Output Noise Floor: -162 dBm/Hz Input IP3: +33 dBm 3×3 mm QFN Plastic Package

J-FET Amplifier 2 Circuit 8-SO