Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp Features: True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 36 V Dual-supply capability from ±2.5 V to ±18 V  Excellent load drive Capacitive load drive up to 350 pF Minimum output current of 15 mA  Excellent ac performance for low power 800 μA maximum quiescent current Unity-gain bandwidth: 1.8 MHz Slew rate of 3 V/μs  Excellent dc performance 800 μV maximum input offset voltage 2 μV/°C typical offset voltage drift 25 pA maximum input bias current  Low noise: 13 nV/√Hz @ 10 kHz 

DC/DC CTRL SYNC BUCK 1.5MHZ LFCSP-32; Supply Voltage Min:2.75V; Supply Voltage Max:20V; No. of Outputs:2 Output; Duty Cycle (%):50%; Controller IC Case Style:LFCSP; No. of Pins:32Pins; Switching Frequency:1.5MHz; Topology:Synchronous Buck (Step Down); Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Cut Tape; Product Range:ADP1850 Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); No. of Outputs:2Outputs

Ultralow Noise, LDO XFET 3.0V Voltage Reference w/Current Sink and Source Features: Ultralow noise (0.1 Hz to 10 Hz) ADR440: 1 μV p-p ADR441: 1.2 μV p-p ADR443: 1.4 μV p-p ADR444: 1.8 μV p-p ADR445: 2.25 μV p-p Superb temperature coefficient A Grade: 10 ppm/°C B Grade: 3 ppm/°C Low dropout operation (supply voltage headroom): 500 mV Input range: (VOUT + 500 mV) to 18 V High output source and sink current +10 mA and −5 mA, respectively Wide temperature range: −40°C to +125°C

5 kV Signal Isolated, ESD Protected, 500 kbps, Full/Half Duplex RS-485 Transceiver Features: Isolated, RS-485/RS-422 transceiver, configurable as half- or full-duplex ±15 kV ESD protection on RS-485 input/output pins 500 kbps data rate Complies with ANSI TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E) Suitable for 5 V or 3.3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs True fail-safe receiver inputs 256 nodes on the bus Thermal shutdown protection Safety and regulatory approvals UL recognition 5000 V rms isolation voltage for 1 minute per UL1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 Reinforced insulation, VIORM = 849 VPEAK CSA Component Acceptance Notice 5A IEC 60950-1: 380 V rms (reinforced) Operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package

Dual Port, Xpressview, 225 MHz HDMI Receiver Features: High-Definition Multimedia Interface (HDMI) 1.4a features supported All mandatory and additional 3D video formats supported Extended colorimetry, including sYCC601, Adobe RGB, Adobe YCC 601, xvYCC extended gamut color HDMI receiver 225 MHz maximum TMDS clock frequency Audio support including high bit rate (HBR) and direct stream digital (DSD) Xpressview fast switching of HDMI ports S/PDIF (IEC 60958-compatible) digital audio support Supports up to four I2S outputs Interrupt controller with two interrupt outputs Standard Identification (STDI) circuit High-bandwidth Digital Content Protection (HDCP) - 1.4 support with internal HDCP keys HDCP repeater support - Up to 127 KSVs supported See data sheet for additional features

Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers (Dual) Features: High speed and fast settling −3 dB bandwidth: 220 MHz (G = +1) Slew rate: 170 V/μs Settling time to 0.1%: 28 ns Video specifications (G = +2, RL = 150 Ω) 0.1 dB gain flatness: 25 MHz Differential gain error: 0.05% Differential phase error: 0.25° Single-supply operation Wide supply range: 2.7 V to 5.5 V Output swings to within 50 mV of supply rails Low distortion: 79 dBc SFDR at 1 MHz Linear output current: 125 mA at −40 dBc Low power: 4.4 mA per amplifier

High Performance, Digital Output Gyroscope Features: Complete rate gyroscope on a single chip ±300°/sec angular rate sensing Ultrahigh vibration rejection: 0.01°/sec/g Excellent 16°/hour null bias stability Internal temperature compensation 2000 g powered shock survivability SPI Digital output with 16-bit data word Low noise and low power 3.3 V to 5 V operation -40°C to + 105°C operation Ultra small, light, and RoHS compliant Two package options: -- Low cost SOIC_CAV package for yaw rate (z-axis) response -- Innovative ceramic vertical mount package (LCC_V), which can be oriented for pitch, roll, or yaw response

High Performance, Narrow-Band Transceiver IC Features: High performance, low power, narrow-band transceiver Enhanced performance ADF7021-N with external VCO Frequency bands using external VCO: 80 MHz to 960 MHz Improved adjacent channel power (ACP) and adjacent channel rejection (ACR) compared with the ADF7021-N Programmable IF filter bandwidths: 9 kHz, 13.5 kHz, and 18.5 kHz Modulation schemes: 2FSK, 3FSK, 4FSK, MSK Spectral shaping: Gaussian and raised cosine filtering Data rates: 0.05 kbps to 24 kbps Power supply: 2.3 V to 3.6 V See data sheet for additional Features

24-Bit, 8.5 mW, 109 dB, 128 kSPS/64 kSPS/32 kSPS ADCs Features: Download AD7766-2-KGD Data Sheet. Available as Known Good Die and fully guaranteed in data sheet specifications Oversampled successive approximation (SAR) architecture High performance ac and dc accuracy, low power 115.5 dB dynamic range, 32 kSPS (AD7766-2) 112.5 dB dynamic range, 64 kSPS (AD7766-1) 109.5 dB dynamic range, 128 kSPS (AD7766) −112 dB THD Exceptionally low power 8.5 mW, 32 kSPS (AD7766-2) 10.5 mW, 64 kSPS (AD7766-1) 15 mW, 128 kSPS (AD7766) High dc accuracy 24 bits, no missing codes (NMC) INL: ±6 ppm (typical), ±15 ppm (maximum) Low temperature drift Zero error drift: 15 nV/°C Gain error drift: 0.4 ppm/°C See data sheet for additional features

Quad 16-/14-/12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface