10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum

Integrated AMR Angle Sensor and Signal Conditioner with Differential Outputs Features: Contactless angular measurement High precision 180° angle sensor Typical angular error of ±0.1° Low output noise of 850 μV rms Sine and cosine differential outputs Ratiometric analog voltage outputs Negligible hysteresis SAR or Σ-Δ ADC compatible Temperature compensated AMR bridge Industrial temperature range: −40°C to +125°C Automotive temperature range: −40°C to +150°C EMI resistant Fault diagnostics VDD from 2.7 V to 5.5 V Minimal phase error of 0.85° at 30,000 rpm AEC-Q100 qualified for automotive applications Single chip solution Available in an 8-lead SOIC package

18 V, 725 A, 4 MHz CMOS RRIO Operational Amplifier Features: Low power at high voltage (18 V): 725 μA maximum Low offset voltage: 2.2 mV maximum over entire common-mode range Low input bias current: 15 pA maximum Gain bandwidth product: 4 MHz typical at Av = 100 Unity-gain crossover: 4 MHz typical −3 dB closed-loop bandwidth: 2.1 MHz typical Single-supply operation: 3 V to 18 V Dual-supply operation: ±1.5 V to ±9 V Unity-gain stable

3.1 nV/Hz, 1 mA, 180 MHz, Rail-to-Rail Input/Output Amplifier Features: Low Noise 3.1 nV/√Hz at 100 kHz 0.7 pA/√Hz at 100 kHz Low Distortion (HD2/HD3) -141/-144 dBc at 1 kHz -112/-115 dBc at 100 kHz -95/-79 dBc at 1 MHz High speed performance -3dB bandwidth: 200 MHz Slew Rate: 225 V/µs 0.1% Settling Time: 47 ns Low input offset voltage and drift ±20 / ±125 µV (typical / max) 0.7 /3.7 µV/°C (typical) Low input offset current and drift 8 / 100 nA (typical / max) 30 / 250 pA/°C (typical / max) Rail-to-Rail Input and Output Low quiescent current: Enabled: 1 mA at ±5V Disabled: 2.4 µA at ±5V Wide supply range: 2.7 V to 11 V Small Packaging: 6-lead SC70, 6-lead SOT-23

8 GHz to 16 GHz, 4-Channel, X Band and Ku Band Beamformer Features: 8 GHz to 16 GHz frequency range Half-duplex for transmit and receive modes Single-pin transmit and receive control 360° phase adjustment range 2.8° phase resolution ≥31 dB gain adjustment range ≤0.5 dB gain resolution Bias and control for external transmit and receive modules Memory for 121 prestored beam positions Four −20 dBm to +10 dBm power detectors Integrated temperature sensor Integrated 8-bit ADC for power detectors and temperature sensor Programmable bias modes 4-wire SPI interface

15 V /12 V Quad SPST NC Switch Features: 33 V Supply Range Fully Specified at +12 V, ±15 V 130 Ω on Resistance No VL Supply Required 3 V Logic-compatible Inputs Rail-to-rail Operation 16-lead TSSOP and 16-lead SOIC Typical Power Consumption: <0.03 μW

9.5 RON, 16-Channel, Differential 8-Channel, 15 V/+12 V/5 V iCMOS Multiplexers Features: 9.5 Ω on resistance at 25°C Up to 300 mA of continuous current Fully specified at ±15 V/+12 V/±5 V 3 V logic-compatible inputs Rail-to-rail operation Break-before-make switching action 28-lead TSSOP and 32-lead, 5 mm × 5 mm LFCSP

4 RON, Triple SPDT 15 V/+12 V/5 V iCMOS Switch Features: 4.7 Ω maximum on resistance at 25°C 0.5 Ω on-resistance flatness Fully specified at ±15 V/+12 V/±5 V 3 V logic-compatible inputs Up to 115 mA continuous current per channel Rail-to-rail operation Break-before-make switching action 16-/20-lead TSSOP and 4 mm × 4 mm LFCSP

8-Bit, 1 GSPS, JESD204B, Quad Analog-to-Digital Converter Features:JESD204B (Subclass 1 and Subclass 0) coded serial digital outputs Lane rates up to 15 Gbps 1.6 W total power at 1 GSPS 400 mW per ADC channel SFDR: 71 dBFS at 611 MHz (1.44 V p-p input range) SNR: 48.6 dBFS at 611 MHz (1.44 V p-p input range) SINAD: 48.5 dBFS at 611 MHz (1.44 V p-p input range) 0.9 V, 1.8 V, and 2.5 V dc supply operation No missing codes Internal ADC voltage reference Analog input buffer On-chip dithering to improve small signal linearityFlexible differential input range 1.44 V p-p to 2.16 V p-p (1.44 V p-p default) 1.4 GHz analog input full power bandwidth Fast detect bits for efficient AGC implementation Differential clock input Integer clock divide by 1, 2, 4, or 8 On-chip temperature diode Flexible JESD204B lane configurations

Quad, Low Power, 12-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator Features: Highly integrated quad DAC On-chip 4096 × 12-bit pattern memory On-chip DDS Power dissipation at 3.3 V, 4 mA output typical 315.25 mW at 180 MSPS Power-down mode: <5 mW at 3.3 V Supply voltage: 1.8 V to 3.3 V SFDR to Nyquist: 86 dBc at 10 MHz output Phase noise at 1 kHz offset, 180 MSPS, 4 mA: −140 dBc/Hz Differential full-scale current outputs: 8 mA maximum at 3.3 V Small footprint, 5 mm × 5 mm with 3.5 mm × 3.6 mm exposed paddle, 32-lead LFCSP RoHS compliant package