Five-Channel, Current Output DAC with Internal Reference and SPI Features: Per channel programmable output current ranges: 300 mA, 200 mA, 100 mA, 50 mA, 25 mA, 12.5 mA, 6.25 mA, and 3.125 mA  Flexible 2.1 V to VCC output supply voltages  Flexible single- or dual-supply operation 0.6 V maximum dropout voltage guaranteed Separate voltage supply per output channel Internal switches to optional negative supply Full 12-bit and 16-bit resolution at all ranges Guaranteed operation −40°C to 125°C (H-grade) Precision internal reference (10 ppm/°C maximum VREF temperature coefficient) or external reference Analog multiplexer monitors voltages and currents A/B toggle via SPI or dedicated pin 1.71 V to VCC digital input and output supply voltage 32-lead lead frame chip scale package (LFCSP)

High Voltage High Current Hot Swap Controller Features: Allows Safe Board Insertion into Live Backplane Wide Operating Voltage Range: 6.5V to 80V Drives Two Gates for High Power Applications Configurable Parallel, Staged Start or Single MOSFET Modes Adjustable Precision Current Limit: 6mV to 20mV Current Foldback Limits MOSFET Power SOA Timer Optimizes MOSFET Capability Monitors VGS and VDS for MOSFET Health 12V Gate Drive for Lower MOSFET RDS(ON) Parallelable Controllers for Very High Current Levels Available in 24-Lead Narrow SSOP and 24-Pin 4mm × 5mm QFN Packages

500mA Power Op Amp with Adjustable Precision Current Limit Features: ±500mA Minimum Output Current Independent Adjustment of Source and Sink Current Limits 1% Current Limit Accuracy Improved Reactive Load Driving Stability Operates with Single or Split Supplies Shutdown/Enable Control Input Open-Collector Status Flags: Sink Current Limit Source Current Limit Thermal Shutdown Fail-Safe Current Limit and Thermal Shutdown 1.6V/μs Slew Rate 3.6MHz Gain-Bandwidth Product Specified Temperature Range: –40°C to 85°C Available in a 20-Lead TSSOP Package

Digitally Controlled Programmable Gain Amplifiers in SOT-23 Features: 3-Bit Digital Gain Control in Three Gain-Code Options Rail-to-Rail Input Range Rail-to-Rail Output Swing Single or Dual Supply: 2.7V to 10.5V Total 11MHz Gain Bandwidth Product Input Noise Down to 8nV/√Hz System Dynamic Range to 120dB Input Offset Voltage: 1.5mV 8-Pin Low Profile (1mm) SOT-23 (ThinSOT™) Package

SmartMesh IP Wireless 802.15.4e System-on-Chip Features: 72-pin 10mm × 10mm QFN package 2.4 GHz, IEEE 802.15.4e System-on-Chip, Complete with Embedded SmartMesh Networking Software >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Serves as either a Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network These products contain encryption. Import/export restrictions may apply.

Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver Features: Fully Differential Input and Output Wide Supply Range: 2.375V to 12.6V Rail-to-Rail Output Swing Low Noise: 3nV/√Hz Low Distortion, 2VP-P, 1MHz: –94dBc Adjustable Output Common Mode Voltage Unity Gain Stable Gain-Bandwidth: 70MHz Slew Rate: 65V/μs Large Output Current: 85mA DC Voltage Offset <2mV MAX Open-Loop Gain: 100V/mV Low Power Shutdown 8-Pin MSOP or 3mm × 3mm DFN Package

GaAs MMIC SP4T Non-Reflective Switch, DC - 3.5 GHz Features: RoHS Compliant Product Low Insertion Loss (2 GHz): 0.7 dB Single Positive Supply: VDD = +5V Integrated 2:4 TTL Decoder 16 Lead QSOP Package

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA

Single Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 3 mm × 3 mm LFCSP Qualified for automotive applications