RF Mixer mix DBL LO Amp 0.5-2.4GHz

Precision, Low Cost, High Speed, BiFET Dual Op Amp Features: Enhanced replacement for LF412 and TL082 AC performance Settles to ±0.01% in 1.0 μs 16 V/μs minimum slew rate (AD712J) 3 MHz minimum unity-gain bandwidth (AD712J) DC performance 200 V/mV minimum open-loop gain (AD712K) Surface mount available in tape and reel in accordance with the EIA-481A standard MIL-STD-883B parts available Single version available: AD711 Quad version: AD713 Available in PDIP, SOIC_N, and CERDIP packages AD712-EP supports defense and aerospace applications (AQEC standard) Download AD712-EP Data Sheet (pdf) Military temperature range  (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/11603 DSCC Drawing Number

2.5 kV Signal Isolated, 500 kbps, Half Duplex RS-485 Transceiver Features: RS-485 transceiver with electrical data isolation  Complies with ANSI TIA/EIA-485-A and ISO 8482: 1987(E) Slew rate-limited driver outputs Low power operation: 2.5 mA maximum  Suitable for 5 V or 3.3 V operations (VDD1) High common-mode transient immunity: >25 kV/μs See data sheet for additional features

16-Bit, Serial Input, Loop-Powered, 4mA to 20mA DAC Features: 16-bit resolution and monotonicity Pin selectable NAMUR-compliant ranges 4 mA to 20 mA 3.8 mA to 21 mA 3.2 mA to 24 mA NAMUR-compliant alarm currents Downscale alarm current = 3.2 mA Upscale alarm current = 22.8 mA/24 mA Total unadjusted error (TUE): 0.05% maximum INL error: 0.0035% FSR maximum Output TC: 3 ppm/°C typical Quiescent current: 300 μA maximum Flexible SPI-compatible serial digital interface with Schmitt triggered inputs On-chip fault alerts via FAULT pin or alarm current Automatic readback of fault register on each write cycle Slew rate control function Gain and offset adjust registers On-chip reference TC: 4 ppm/°C maximum Selectable regulated voltage output Loop voltage range: 5.5 V to 52 V Temperature range: −40°C to +105°C TSSOP and LFCSP packages

Up-Down Converters GaAs MMIC I/Q Downconverter, 9 - 12 GHz

Phase Locked Loops - PLL Fractional-N PLL

Analog to Digital Converters - ADC 20-Bit, 40 MSPS SAR ADC

Analog Devices Inc. AD4080 Differential SAR ADCs

Analog Devices Inc. AD4080 Differential SAR ADCs

Features:

• High performance
  
  • Throughput of 40MSPS, 46.25ns conversion latency
  • INL of ±4ppm (typical), ±8ppm (maximum)
  • SNR/THD
    
    • 93.6dB (typical)/-110dB (typical) at fIN = 1kHz
    • 93.5dB (typical)/-104dB (typical) at fIN = 1MHz
  • Noise spectral density at -167.6dBFS/Hz
  • 20-bit resolution, no missing codes
• Low power
  
  • 79.3mW typical at 40MSPS with -0.5dBFS sine-wave input
• Easy Drive, fully differential Input
  
  • 6Vp-p differential input range
  • Continuous signal acquisition
  • Linearized, 5μA/MSPS input current
• Integrated, low-drift reference buffer and decoupling
• Integrated VCM generation
• Digital features and data interface
  
  • Conversion result FIFO, 16K sample depth
  • Digital averaging filter with up to 210 decimation
• SPI configuration
• Configurable data interface
  
  • Single lane, DDR, serial LVDS, 800MBPS per lane
  • Dual lane, DDR, serial LVDS, 400MBPS per lane
  • Single/quad lane SPI data interface
• Package
  
  • 49-ball, 5mm x 5mm CSP_BGA, 0.65mm pitch
  • Integrated supply decoupling capacitors
• Operating temperature range of -40°C to +85°C

Applications:

• Digital imaging
• Cell analysis
• Spectroscopy
• Automated test equipment
• High speed data acquisition
• Digital control loops, hardware in the loop
• Power quality analysis
• Source measurement units
• Electron and x-ray microscopy
• Radar level measurement
• Nondestructive test
• Predictive maintenance and structural health

MEMS ACCELEROMETER, XYZ-AXIS, LCC-14;

6.5V, 4 A, High Efficiency, Step-Down DC-to-DC Regulator Features: 4 A continuous output current 43 mΩ and 29 mΩ integrated FET ±1.5% output accuracy Input voltage range: 2.7 V to 6.5 V Output voltage: 0.6 V to VIN Switching frequency Fixed frequency: 600 kHz or 1.2 MHz Adjustable frequency: 500 kHz to 1.4 MHz Synchronizable from 500 kHz to 1.4 MHzSelectable synchronize phase shift: 0° or 180° Current mode architecture Precision enable input Power-good output Voltage tracking input Integrated soft start Internal compensation Starts up into a precharged output UVLO, OVP, OCP, and thermal shutdown Available in 16-lead, 4 mm × 4 mm LFCSP package Supported by ADIsimPower™ design tool

1800 MHz TO 2700 MHz, 1 W RF Driver Amplifier Features: Operation from 1800 MHz to 2700 MHz Gain of 24.3 dB at 2140 MHz OIP3 of 45.5 dBm at 2140 MHz P1dB of 30.8 dBm at 2140 MHz Noise figure of 4.7 dB at 2140 MHz Power supply: 5 V Power supply current: 362 mA typical Internal active biasing Fast power-up/power-down function Compact 4 mm × 4 mm, 16-lead LFCSP ESD rating of ±1 kV (Class 1C) Pin-compatible with the ADL5605 (700 MHz to 1000 MHz)