Very Low Quiescent Current, 150 mA, with Output Discharge LDO Regulator Features: Very low quiescent current IQ = 590 nA with 0 µA load IQ = 890 nA with 1 µA load Maintains very low quiescent current in dropout (pass through mode): IQ_DROP = 720 nA with 0 µA load IQ_DROP = 1200 nA with 1 µA load Stable with 1 µF ± 30% ceramic input and output capacitors Maximum load current: ILOAD_MAX: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: 50 nA typical Low dropout voltage: 120 mV at 150 mA load Initial output voltage accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 7 fixed output voltage options: 1.2 V to 3.3 V Adjustable output option can be set from 1.2 V to 4.2 V See data sheet for additional features

1.2 A, 20 V, 700 kHz Nonsynchronous Step-down Switching Regulator Features: High efficiency, up to 91% 1.2 A maximum load current ±2% output accuracy over temperature range 700kHz (ADP2300) or 1.4MHz (ADP2301) switching frequency options Wide input voltage range: 3.0 V to 20 V Current-mode control architecture Output voltage from 0.8 V to 0.85×VIN See datasheet for additional features

Isolated, Precision Half-Bridge Driver, 0.1 A Output Features: Isolated high-side and low-side outputs High side or low side relative to input: ±700 VPEAK High-side/low-side differential: 700 VPEAK 0.1 A peak output current High frequency operation: 5 MHz maximum High common-mode transient immunity: >75 kV/µs High temperature operation: 105°C Wide body, 16-lead SOIC Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak

Robust, Triple Ch. Isolator W/ Output Enable & 0 Reverse Channels Features: High common-mode transient immunity: 100 kV/µs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Backward compatibility ADuM130E1/ADuM131E1 pin compatible with ADuM1300/ADUM1301 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package See data sheet for additional information

12-Bit High Speed Multiplying D/A Converter Features: Differential Nonlinearity: ±1/2 LSB Nonlinearity: 0.05% Fast Settling Time: 250 ns High Compliance: -5 V to +10 V Differential Outputs: 0 to 4 mA Guaranteed Monotonicity: 12 bits Low Full-Scale Tempco: 10 ppm/°C Circuit Interface to TTL, CMOS, ECL, PMOS/NMOS Low Power Consumption: 225 mW Industry Standard AM6012 Pinout Available in Die Form

20 V, 500 mA, Low Noise LDO Regulator with Soft Start Features: Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 μV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −2% to +1%, TJ = −40°C to +125°C −1.25% to +1%, TJ = 0°C to +85°C Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 μA at VIN = 12 V, stable with small 1 μF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.22 V to 19 V Programmable soft start for inrush current control Foldback current-limit and thermal overload protection User programmable precision UVLO/enable Power-good indicator 8-lead LFCSP and 8-lead SOIC packages

Integrated Optical Module for Smoke Detection Features: Supports UL-217 edition 8/ UL-568 ed. 7; EN-54; GB..; ISO Lowers Nuisance Alarms using a Dual Wavelength detection with higher SNR and dynamic range. 3X Lower power dissipation enables smaller/ cheaper batteries Integrated Optical Module (3.8mm x 5mm x 0.9mm with 1 blue LED, 1 IR LED and 2 Photo diodes) simplifies EMC design, allows for greater diversity of industrial design options and results in 75% fewer discrete components. Loop calibration at final test reduces calibration challenges with smoke detector products. Supported by ADI designed smoke chamber manufactured by Accumold, 28800X. (Please see EVAL-CHAMBER Mechanical Dimensions (PDF), also under Resources below)

Clock & Timer Development Tools LTC6994-2 Demo Board 100ms, Output Rising Edge Delayed from Trigger Rising Edge

Dual 5V, 2A Synchronous Step-Down DC/DCs in Tiny LQFN and WLCSP Features: Dual Outputs Each with 2A Output Current High Efficiency: 19mΩ NMOS and 75mΩ PMOS Wide Bandwidth, Fast Transient Response Switching Frequency Synchronizable Up to 3MHz VIN Range: 2.25V to 5.5V VOUT Range: 0.5V to VIN VOUT Accuracy: ±1% Low Ripple Burst Mode® Operation Peak Current Mode Control Minimum On-Time: 25ns Safely Tolerates Inductor Saturation in Overload Shutdown Current: 1.2µA Precision 400mV Enable Thresholds Internal Soft-Start and Compensation Power Good Output Low Profile, Thermally Enhanced 12-Lead 2mm × 2mm × 0.74mm LQFN and 16-Ball 1.64mm × 1.64mm × 0.5mm WLCSP Packages AEC-Q100 Qualified for Automotive Applications

High Speed, Fast Settling Precision Operational Amplifier Features:FAST  Slew Rate: 50 V/µs Min Settling Time (0.01%): 1 µs Max Gain Bandwidth Product: 10 MHz Typ Excellent Radiation HardnessPRECISE Common Mode Rejection: 88 dB Min Open Loop Gain: 500 V/mV Min Offset Voltage: 750 µV Max Bias Current: 200 pA Max Available in Die Form