EN55022B Compliant 58V, 24W Inverting-Output DC/DC Module Regulator Features: Complete Low EMI Switch Mode Power Supply EN55022 Class B Compliant Wide Input Voltage Range: 3.6V to 58V Up to 4A Output Current 24W Output from 12VIN to –24VOUT, PLOSS = 5W, TA = 60°C, tRISE = 60°C, 200LFM Output Voltage Range: –26.5V ≤ VOUT– ≤ –0.5V Safe Operating Area: VIN + |VOUT–| ≤ 58V ±1.67% Total DC Output Voltage Error Over Line, Load and Temperature (–40°C to 125°C) Parallel and Current Share with Multiple LTM4651s Constant-Frequency Current Mode Control Frequency Synchronization Range: 250kHz to 3MHz Power Good Indicator and Programmable Soft-Start Overcurrent/Overvoltage/Overtemperature Protection 15mm × 9mm × 5.01mm BGA Package

3GHz to 20GHz Microwave Mixer Features: Upconversion or Downconversion High IIP3: +24.3dBm at 10GHz +21.5dBm at 17GHz 9dB Conversion Loss at 10GHz +16dBm Input P1dB at 10GHz Integrated LO Buffer: 0dBm LO Drive Low LO-RF Leakage: <–25dBm 50Ω Wideband Matched RF, LO and IF Ports 3.3V/132mA Supply Fast Turn ON/OFF for TDD Operation 3mm × 2mm, 12-Lead QFN Package

High Speed Rail-to-Rail Input Comparator with LVDS Compatible Outputs Features: Low Propagation Delay: 1.8ns Typ. Low Overdrive Dispersion: 1ns Typ. (10mV to 125mV Overdrive) High Toggle Rate: 890Mbps Typ. LVDS Compatible Output Stage Rail-to-Rail Inputs Extend Beyond Both Rails Low Quiescent Current: 13.4mA Supply Range: 2.4V to 5.25V Features within the LTC6754 Family: Separate Input and Output Supplies Shutdown Pin for Reduced Power Output Latch and Adjustable Hysteresis SC70 and 3mm × 3mm QFN Packages

Single Channel Transimpedance Amplifier with Output Multiplexing Features: 220MHz –3dB Bandwidth with 2pF Input Capacitance Single-Ended Output 74kΩ Transimpedance Gain 4.8pA/√Hz Input Current Noise Density at 200MHz (2pF) 64nARMS Integrated Input Current Noise Over 200MHz (2pF) Linear Input Range 0µA to 30µA Overload Current > ±400mA Peak Fast Overload Recovery: 1mA in 10ns Fast Output MUXing: <50ns Single 5V Supply 90mW Power Dissipation 2VP-P Output Swing on 100Ω Load 3mm × 3mm, 16-Lead QFN Package Output MUX Combines Multiple LTC6560 Devices AEC-Q100 Qualified for Automotive Applications

High Voltage High Current Hot Swap Controller Features: Allows Safe Board Insertion into Live Backplane Wide Operating Voltage Range: 6.5V to 80V Drives Two Gates for High Power Applications Configurable Parallel, Staged Start or Single MOSFET Modes Adjustable Precision Current Limit: 6mV to 20mV Current Foldback Limits MOSFET Power SOA Timer Optimizes MOSFET Capability Monitors VGS and VDS for MOSFET Health 12V Gate Drive for Lower MOSFET RDS(ON) Parallelable Controllers for Very High Current Levels Available in 24-Lead Narrow SSOP and 24-Pin 4mm × 5mm QFN Packages

100MHz to 70GHz Linear-in-dB RMS Power Detector with 35dB Dynamic Range Features: Ultra Wide Matched Input Frequency Range: 100MHz to 70GHz 35dB Linear Dynamic Range (< ±1dB Error) 28.5mV/dB Logarithmic Slope ±2dB Flat Response from 100MHz to 60GHz Accurate RMS Power Measurement of High Crest Factors (Up to 12dB) Modulated Waveforms Low Power Shutdown Mode Low Supply Current: 33mA at 3.3V (Typical) Small 2mm × 2mm Plastic DFN8 Package I-Grade: −40°C to 105°C Rated H-Grade: −40°C to 125°C Rated with Guaranteed Log-Slope and Log-Intercept ESD Rating: 2500V HBM, 1500V CDM

Wireless Li-Ion Charger with 1.2V Step-Down DC/DC Converter Features: Wireless Li-Ion Battery Charger Plus High Efficiency Multi-Mode Charge Pump DC/DC Programmable Charge Current from 1mA to 50mA Via an External Resistor Wideband Rx Frequency: DC to >10MHz Integrated Rectifier with Overvoltage Limit Charge Voltage: 4.2V Low Battery Disconnect: 3.0V NTC Pin for Temperature Qualified Charging DC/DC Regulated Output: 1.2V DC/DC Output Current: Up to 60mA 50kHz/75kHz Switching, No Audible Noise Pushbutton and/or Digital on/off Control for DC/DC Thermally Enhanced 12-Lead 2mm 2mm LQFN Package

High Efficiency Thermoelectric Cooler Controller Features: High Efficiency, Low Noise Topology Adjustable Output Slew Rate Reduces EMI Full-Bridge Controller for Bidirectional Current Control Adjustable Pulse-by-Pulse Bidirectional TEC Current Limit Open/Shorted Thermistor Indication Solution Footprint in Less Than 0.6' x 0.8' (Double-Sided PCB) Available in 5mm x 5mm QFN and 28-Pin SSOP Packages TEC Voltage Clamping TEC Current, Voltage and Heat/Cool Status Outputs Adjustable/Synchronizable Oscillator Frequency Reduces Filter Component Size and System Noise 2.5V Reference Voltage Output 2.7V Minimum Operating Voltage

42V, 2.5A Synchronous Step-Down Regulator with Current Sense and 2.5A Quiescent Current Features: Rail-to-Rail Current Sense Amplifier with Monitor Wide Input Voltage Range: 3.4V to 42V Ultralow Quiescent Current Burst Mode® Operation: 2.5μA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P High Efficiency Synchronous Operation: 96% Efficiency at 1A, 5VOUT from 12VIN 94% Efficiency at 1A, 3.3VOUT from 12VIN Fast Minimum Switch-On Time: 50ns Low Dropout Under All Conditions: 200mV at 1A Allows Use Of Small Inductors Low EMI Adjustable and Synchronizable: 200kHz to 2.2MHz Current Mode Operation Accurate 1V Enable Pin Threshold Internal Compensation Output Soft-Start and Tracking Small Thermally Enhanced 3mm × 5mm 24-Lead QFN Package AEC-Q100 Qualified for Automotive Applications

20A DC/DC Module (Power Module) Step-Down Regulator Features: Complete 20A Switch Mode Power Supply 4.5V to 20V Input Voltage Range 0.6V to 5.5V Output Voltage Range ±1.5% Total DC Output Voltage Error (–40°C to 125°C) Differential Remote Sense Amplifier for Precision Regulation for (VOUT ≤ 3.3V) Current Mode Control/Fast Transient Response Parallel Current Sharing (Up to 80A) Frequency Synchronization Selectable Pulse-Skipping or Burst Mode® Operation Soft-Start/Voltage Tracking Up to 88% Efficiency (12VIN, 1.8VOUT) Overcurrent Foldback Protection Output Overvoltage Protection Internal Temperature Monitor Overtemperature Protection 15mm × 15mm × 4.32mm LGA and 15mm × 15mm × 4.92mm BGA Packages SnPb (BGA) or RoHS Compliant (LGA and BGA) Finish