35V/3.2A Multi-Cell Lithium-Ion Step-Down Battery Charger with PowerPath and I2C Telemetry Features: Li-Ion/Polymer Battery Charger with Termination Wide Charging Input Voltage Range: 4.5V to 35V High Efficiency Synchronous Operation 16-Bit Digital Telemetry System Monitors VBAT, IBAT, RBAT, TBAT, TDIE, VIN, IIN, VOUT Charges 1-8 Lithium-Ion/Polymer Cells Input Undervoltage Charge Current Limit Loop Input MPPT for Solar Panel Inputs Input Current Limit Prioritizes System Load Output Low Loss PowerPath™ Instant-On Operation with Discharged or Missing Battery JEITA Temperature Controlled Charging Pin Compatible with LiFePO4 and SLA Versions

RF Mixer LINEAR IF SUBSYSTEM

The AD7194 is a low noise, complete analog front end for high precision measurement applications. It contains a low noise, 24-bit sigma-delta (?-?) analog-to-digital converter (ADC). The on-chip low noise gain stage means that signals of small amplitude can interface directly to the ADC.The device can be configured to have eight differential inputs or sixteen pseudo differential inputs. The on-chip 4.92 MHz clock can be used as the clock source to the ADC or, alternatively, an external clock or crystal can be used. The output data rate from the part can be varied from 4.7 Hz to 4.8 kHz.The device has a very flexible digital filter, including a fast settling option. Variables such as output data rate and settling time are dependent on the option selected. For applications that require all conversions to be settled, the AD7194 includes zero latency.The part operates with a power supply from 3 V to 5.25 V. It consumes a current of 4.65 mA, and it is housed in a 32-lead LFCSP package.Applications PLC/DCS analog input modules Data acquisition Strain gage transducers Pressure measurement Temperature measurement Flow measurement Weigh scales Chromatography Medical and scientific instrumentation

IC Digital Coupler HYBRID SOP 16PIN PLASTIC

Dual, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference, I2C Interface Features: Low power, smallest pin-compatible, dual nanoDACs AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm × 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

Dual-Channel, 5 kV Isolators with Integrated DC/DC Converter (1/1 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 5 V or 3.3 V output Up to 400 mW output power Dual dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 125 V rms See datasheet for additional features

0 Hz to 4.5 GHz, 40 dB Off Isolation at 1 GHz, 17 dBm P1dB at 1 GHz SPST Switches Features: Absorptive switch Enables user to pass dc signals up to 0.5 V without dc blocking capacitor Operational from 0 Hz up to 4.5 GHz at −3 dB frequency 40 dB off isolation at 1 GHz typical 0.8 dB insertion loss at 1 GHz typical 17 dBm P1dB at 1 GHz typical Available in 3 mm × 3 mm, 8-lead MSOP and 8-lead LFCSP <1 μA power consumption CMOS/LVTTL control logic Specified at 1.65 V to 2.75 VADG901-EP supports defense and aerospace applications (AQEC standard) Download ADG901-EP data sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/16613 DSCC Drawing Number

8-Channel 15 V/+12 V Multiplexer Features: 33 V Supply Range 130 Ω on Resistance Fully Specified at ±15 V/+12 V 3 V Logic-compatible Inputs Rail-to-rail Operation Break-before-make Switching Action 16-lead TSSOP and 16-lead SOIC_N Upgrade for the ADG508A / ADG509A

Ultralow Noise, 200 mA, Linear Regulator Features: PSRR performance of 54 dB at 100 kHz Ultralow noise independent of VOUT 3 μV rms, 0.1 Hz to 10 Hz 9.5 μV rms, 0.1 Hz to 100 kHz 9 µV rms, 10Hz to 100KHz 17 µV rms, 10Hz to 1MHz Low dropout voltage: 150 mV at 200 mA load Maximum output current: 200 mA Input voltage range: 2.2 V to 5.5 V Low quiescent and shutdown current Initial accuracy: ±1% Accuracy over line, load, and temperature: −2.5%/+1.5% 5-lead TSOT package and 6-lead LFCSP package