Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 120-lead LQFP_EP Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases Advanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 24 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 4x I2C, 2x UARTs 6x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 2-ch 12bit Housekeeping ADCs 22 GPIO pins, 24 DAI pins Thermal SensorPackage 14mm x 14mm 120-lead LQFP_EAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

Low Cost JFET Input Operational Amplifier Features: TL082/TL084 compatible Low input bias current: 10 pA maximum Offset voltage 5.5 mV maximum (ADTL082A/ADTL084A) 9 mV maximum (ADTL082J/ADTL084J) ±15 V operation Low noise: 16 nV/√Hz Wide bandwidth: 5 MHz Slew rate: 20 V/μs CMRR: 80 dB minimum Total harmonic distortion: 0.001% Supply current: 1.2 mA typical Unity-gain stable

Quad-Channel Isolators with Integrated DC-to-DC Converter (3:1 directionality) Features: isoPower integrated, isolated dc-to-dc converter 100 mA output supply AEC-Q100 qualified for automotive applications ADuM6421AW (ADuM6423AW pending) Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB Quad dc to 100 Mbps signal isolation channels 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage High temperature operation: 125°C maximum High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals (pending) UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE V 0884-11 certificate of conformity (pending) VIORM = 566 V peak CQC certification per GB4943.1-2011 (pending)

1 kV Dual Channel Digital Isolators (1/1 channel directionality) Features: Narrow-body, RoHS-compliant, 8-lead SOIC Safety and regulatory approvals UL recognition UL 1577: 1000 V rms for 1 minute Low power operation 5 V operation 2.4 mA per channel maximum at 0 Mbps to 1 Mbps 11.8 mA per channel maximum at 25 Mbps 3.3 V operation 1.7 mA per channel maximum at 0 Mbps to 1 Mbps 8.2 mA per channel maximum at 25 Mbps Bidirectional communication Up to 25 Mbps data rate (NRZ) 3 V/5 V level translation High temperature operation: 105°C High common-mode transient immunity: >15 kV/μs

1 kV RMS Six-Channel Digital Isolators (4/2 Channel Directionality) Features: Small, 20-lead QSOP 1000 V rms isolation rating Low power operation Bidirectional communication 3.3 V operation 1.6 mA per channel maximum at 0 Mbps to 1 Mbps 7.8 mA per channel maximum at 25 Mbps Up to 25 Mbps data rate (NRZ) 3 V/5 V level translation High temperature operation: 105°C High common-mode transient immunity: >15 kV/μs 5 V operation 2.2 mA per channel maximum at 0 Mbps to 1 Mbps 11.2 mA per channel maximum at 25 Mbps

16-Bit, Isolated, Sigma-Delta Modulator Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.25 μV/°C SNR: 82 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±64 mV ENOB: 13 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range: −40°C to +125°C High isolation common-mode transient immunity: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

16-Bit, Isolated, Sigma-Delta Modulator Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.25 μV/°C SNR: 82 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±64 mV ENOB: 13 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range: −40°C to +125°C High isolation common-mode transient immunity: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

16-Bit, Isolated, Sigma-Delta Modulator Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.25 μV/°C SNR: 82 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±64 mV ENOB: 13 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range: −40°C to +125°C High isolation common-mode transient immunity: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

16-Bit, Isolated, Sigma-Delta ADC Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.6 μV/°C maximum SNR: 86 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±320 mV ENOB: 14 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range −40°C to +125°C (16-lead SOIC_W) −40°C to +105°C (8-lead SOIC_IC) 20 V operation on VDD1 High CMTI: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (Pending) VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (Pending)

16-Bit, Isolated, Sigma-Delta Modulator Features:5 MHz to 21 MHz master clock input frequencyOffset drift vs. temperature: 0.25 V/C maximumSNR: 82 dB typical16 bits, no missing codesFull-scale analog input voltage range: 64 mVENOB: 13 bits typicalIDD1: 10 mA maximumOn-board digital isolatorOperating temperature range40C to +125C (16-lead SOIC_W)40C to +105C (8-lead SOIC_IC)High isolation common-mode transient immunity:150 kV/s minimum, VDD2 = 3.3 VWide-body SOICs16-lead SOIC_W8-lead SOIC_IC with increased creepageSafety and regulatory approvalsUL recognition5700 V rms for 1 minute per UL 1577CSA Component Acceptance Notice 5AVDE Certificate of ConformityDIN V VDE V 0884-10: VIORM = 1270 VPEAKDIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)