Differential/Single-Ended Input, Dual, Simultaneous Sampling, 2 MSPS, 12-Bit, 3-Channel SAR A/D Converter Features: Dual 12-bit, 3-channel ADC Throughput rate: 2 MSPS Specified for VDD of 2.7 V to 5.25 V Power consumption: 9 mW at 1.5 MSPS with 3 V supplies 27 mW at 2 MSPS with 5 V supplies Pin-configurable analog inputs 12-channel single-ended inputs 6-channel fully differential inputs 6-channel pseudo differential inputs 70 dB SNR at 50 kHz input frequency Accurate on-chip reference: 2.5 V ±0.2% maximum @ 25°C, 20 ppm/°C maximum Dual conversion with read 437.5 ns, 32 MHz SCLK High speed serial interface SPI®-/QSPI™-/MICROWIRE&trade-/DSP-compatible −40°C to +125°C operation Shutdown mode: 1 μA maximum 32-lead LFCSP and 32-lead TQFP 1 MSPS version, AD7265

Complete Quad, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC Features: Complete quad, 16-bit digital-to-analog converters (DAC) Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V ±1 LSB max INL error, ±1 LSB maximum DNL error Low noise: 60 nV/√Hz Settling time: 10 µs maximum Integrated reference buffers Internal reference: 10 ppm/°C maximum On-chip die temperature sensor Output control during power-up/brownout Programmable short-circuit protection Simultaneous updating via LDAC Asynchronous CLR to zero code Digital offset and gain adjust See Data Sheet for Additional Information

IC Operational Amplifier DUAL CMOS SOP 8PIN PLASTIC

Dual 8-Bit, High Bandwidth Multiplying DACs with Parallel Interface Features: 10 MHz Multiplying Bandwidth INL of ±0.25 LSB @ 8 bits 20-lead TSSOP package 2.5 V to 5.5 V supply operation ±10 V reference input 21.3 MSPS update rate Extended temperature range: −40°C to +125°C 4-quadrant multiplication Power-on reset 0.5 μA typical current consumption Guaranteed monotonic Readback Function AD7528 Upgrade (AD5428) AD7547 Upgrade (AD5447)

Dual 10-Bit, High Bandwidth Multiplying DACs with Parallel Interface Features: 10 MHz multiplying bandwidth INL of ±0.25 LSB @ 8 bits 24-lead TSSOP package 2.5 V to 5.5 V supply operation ±10 V reference input 21.3 MSPS update rate Extended temperature range: −40°C to +125°C 4-quadrant multiplication Power-on reset 0.5 μA typical current consumption Guaranteed monotonic Readback Function AD7528 Upgrade (AD5428)  AD7547 Upgrade (AD5447)

12-Bit High Bandwidth Multiplying DAC's with Serial Interface Features: 2.5 V to 5.5 V supply operation 50 MHz Serial Interface 10 MHz Multiplying Bandwidth 2.5 MSPS update rate INL of ±1 LSB for 12-bit DAC ±10 V reference input Low glitch energy < 2 nV-s Extended temperature range −40°C to +125°C 10-lead MSOP package Pin Compatible 8- (AD5426) and 10- (AD5432) Current Output DACs Guaranteed monotonic 4-quadrant multiplication Power-on reset with brownout detection Daisy-chain mode Readback function 0.4 μA typical power consumption

SENSING ANALOG DEVELOPMENT KITS;

Evaluation Board, Spdt Switch Rohs Compliant: Yes |Analog Devices EV1HMC232ALP4

Non-Isolated PoL Module DC DC Converter 2 Output 0.6 ~ 5.5V 0.6 ~ 5.5V 2.5A, 2.5A 3.6V - 20V Input

The AD8494/AD8495/AD8496/AD8497 are precision instrumentation amplifiers with thermocouple cold junction compensators on an integrated circuit. They produce a high level (5 mV/°C) output directly from a thermocouple signal by combining an ice point reference with a precalibrated amplifier. They can be used as standalone thermometers or as switched output setpoint controllers using either a fixed or remote setpoint control.The AD8494/AD8495/AD8496/AD8497 can be powered from a single-ended supply (less than 3 V) and can measure temperatures below 0°C by offsetting the reference input. To minimize self-heating, an unloaded AD849x typically operates with a total supply current of 180 μA, but it is also capable of delivering in excess of ±5 mA to a load.The AD8494 and AD8496 are precalibrated by laser wafer trimming to match the characteristics of J type (iron-constantan) thermocouples; the AD8495 and AD8497 are laser trimmed to match the characteristics of K type (chromel-alumel) thermo-couples. See Table 1 on the data sheet for the optimized ambient temperature range of each part.The AD8494/AD8495/AD8496/AD8497 allow a wide variety of supply voltages. With a 5 V single supply, the 5 mV/°C output allows the devices to cover nearly 1000 degrees of a thermo-couple’s temperature range.The AD8494/AD8495/AD8496/AD8497 work with 3 V supplies, allowing them to interface directly to lower supply ADCs. They can also work with supplies as large as 36 V in industrial systems that require a wide common-mode input range.Product Highlights Complete, precision laser wafer trimmed thermocouple signal conditioning system in a single IC package. Flexible pinout provides for operation as a setpoint controller or as a standalone Celsius thermometer. Rugged inputs withstand 4 kV ESD and provide over-voltage protection (OVP) up to VS ± 25 V. Differential inputs reject common-mode noise on the thermocouple leads. Reference pin voltage can be offset to measure 0°C on single supplies. Available in a small, 8-lead MSOP that is fully RoHS compliant. Applications J type thermocouple temperature measurement Setpoint controller Celsius thermometer Universal cold junction compensator White goods (oven, stove top) temperature measurements Exhaust gas temperature sensing Catalytic converter temperature sensing div#landing_page_sec ul { padding:0 0 15px 10px; margin:0px; } div#landing_page_sec li { padding:3px 0 2px 20px; margin:0px; list-style:none; background:url(/static/imported-files/embedded_html/images/li_img.gif) no-repeat 7px 9px; display:block; color:#000000; font-family: Arial, Helvetica, sans-serif; }