The LT8610 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5?A of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8610 reducing the input supply current to 1?A. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up. The PG flag signals when VOUT is within ?9% of the programmed output voltage as well as fault conditions. The LT8610 is available in a small 16-lead MSOP package with exposed pad for low thermal resistance. Feedback Voltage Min VIN Output Current Notes LT8610AC-1 0.80V 3.0V 3.5A Fsw = 1.5MHz to 2.2MHz, Optimized Transient Response LT8610AC 0.80V 3.0V 3.5A Fsw = 200kHz to 2.2MHz LT8610AB 0.97V 3.4V 3.5A Improved Burst Mode Efficiency LT8610AX 0.97V 3.4V 3.5A 175?C Max Junction Temp LT8610A 0.97V 3.4V 3.5A Higher Iout, 30ns Min On Time LT8610 0.97V 3.4V 2.5A - APPLICATIONS Automotive and Industrial Supplies General Purpose Step-Down GSM Power Supplies

Demonstration circuit 1793A is a high voltage inverting charge pump with low noise dual-polarity LDO regulators featuring the LTC3260EMSE. The LTC3260 operates with an input voltage from 4.5V to 32V. The demo board provides selectable LDO± output set magnitudes of 3.3V, 5V, 12V and 24V for each polarity. Additional LDO± set point jumper selections and optional topside ADJ± resistors allow the user to set other desired LDO± output voltages. The demo board also provides the means to select between Burst Mode® operation or constant-frequency mode operation, plus select an operating frequency of 500kHz, 200kHz, and 50kHz.

DC1819A: Demo Board for the LTC4415 Dual 4A Ideal Diodes with Adjustable Current Limit,

DC1836A-B: Demo Board for the LTC2955 Pushbutton On/Off Controller with Automatic Turn-On.

The LTC6947 is a high performance, low noise, 6GHz phase-locked loop (PLL), including a reference divider, phase-frequency detector (PFD), ultralow noise charge pump, fractional feedback divider, and VCO output divider.The fractional divider uses an advanced, 4th order ?? modulator which provides exceptionally low spurious levels. This allows wide loop bandwidths, producing extremely low integrated phase noise values.The programmable VCO output divider, with a range of 1 through 6, extends the output frequency range. The differential, low-noise output buffer has user-programmable output power ranging from ?4.3dBm to +4.5dBm, and may be muted through either a digital input pin or software.The ultralow noise charge pump contains selectable high and low voltage clamps useful for VCO monitoring, and also may be set to provide a V+/2 bias.All device settings are controlled through a SPI-compatible serial port.Applications Wireless Basestations (LTE, WiMAX, W-CDMA, PCS) Broadband Wireless Access Microwave Data Links Military and Secure Radio Test and Measurement

DAC 16BIT 1.2MSPS MSOP-8; Resolution (Bits):16bit; Sampling Rate:1.2MSPS; Input Channel Type:Serial; Supply Voltage Range:4.5V to 5.5V; ADC / DAC Case Style:MSOP; No. of Pins:8Pins; Data Interface:SPI; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:AD5543 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

16-Bit DAC in SOIC-8 Package Features: 16-bit resolution ±1 LSB DNL ±1 LSB INL Low noise: 12 nV/√Hz Low power: IDD = 10 μA 0.5 μs settling time 4-quadrant multiplying reference input 2 mA full-scale current ± 20%, with VREF= 10 V Built-in RFB facilitates voltage conversion 3-wire interface Ultracompact 8-lead MSOP and 8-lead SOIC packagesAD5543-EP supports defense and aerospace applications (AQEC standard) Download AD5543-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request

Tiny I2C Programmable Linear Battery Charger with Power Path and USB Mode Compatibility Features: 2.6 mm x 2 mm WLCSP Package Fully programmable via I2C Flexible digital control inputs Up to 2.1 A current from an ac charger in LDO mode Operating input voltage from 4.0 V to 6.7 V Tolerant input voltage -0.5 V to +20 V (USB VBUS) Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2 Built-in current sensing and limiting As low as 30 mΩ battery isolation FET between battery and charger output Thermal regulation prevents over heating Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up.

16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 77.6 dBFS at 9.7 MHz input 71.1 dBFS at 200 MHz input SFDR 93 dBc at 9.7 MHz input 80 dBc at 200 MHz input Low power 56 mW at 20 MSPS 113 mW at 80 MSPS Differential input with 700 MHz bandwidth See data sheet for additional featuresAD9266-EP supports defense and aerospace applications (AQEC standard) Download the AD9266-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/12660 DSCC Drawing Number

OP AMP PRECISION 16.7MHZ 8SOIC; No. of Amplifiers:2 Amplifier; Bandwidth:16.7MHz; Slew Rate:25V/µs; Supply Voltage Range:± 4.5V to ± 18V; Amplifier Case Style:SOIC; No. of Pins:8Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:-; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:± 4.5V to ± 18V; No. of Amplifiers:2Amplifiers; Op Amp Type:JFET; Operating Temperature Range:-40°C to +125°C