12-Bit High Bandwidth Multiplying DAC's with Serial Interface Features: 2.5 V to 5.5 V supply operation 50 MHz Serial Interface 10 MHz Multiplying Bandwidth 2.5 MSPS update rate INL of ±1 LSB for 12-bit DAC ±10 V reference input Low glitch energy < 2 nV-s Extended temperature range −40°C to +125°C 10-lead MSOP package Pin Compatible 8- (AD5426) and 10- (AD5432) Current Output DACs Guaranteed monotonic 4-quadrant multiplication Power-on reset with brownout detection Daisy-chain mode Readback function 0.4 μA typical power consumption

Hot Swap Controller and I2C Power Monitor Features: Allows safe board insertion and removal from a live backplane  Controls supply voltages from 3.15 V to 16.5 V  Precision current sense amplifier  Precision voltage input  12-bit ADC for current and voltage readback  Charge pumped gate drive for external N-channel FET  I2C fast mode-compliant interface (400 kHz maximum) Adjustable analog current limit with circuit breaker  ±3% accurate hot swap current limit level  Fast response limits peak fault current  Automatic retry or latch-off on current fault  Programmable hot swap timing via TIMER pin  Active-high ON pin  2 address pins allow 16 devices on the same bus 10-lead MSOP

800 MHz, Linear-in-dB VGA with AGC Detector Features: Analog variable gain range: −12 dB to +22 dB Linear-in-dB scaling: 37.5 dB/V 3 dB bandwidth: 800 MHz @ VGAIN = 0.5 V Integrated rms detector P1dB: 16 dBm @ 140 MHz Output IP3: 33 dBm @ 140 MHz Noise figure at maximum gain: 9.5 dB @ 140 MHz Input and output impedances: 50 Ω Single-supply voltage from 4.5 V to 5.5 V RoHS-compliant, 24-lead LFCSP

High Performance, Narrow-Band Transceiver IC Features: High performance, low power, narrow-band transceiver Enhanced performance ADF7021-N with external VCO Frequency bands using external VCO: 80 MHz to 960 MHz Improved adjacent channel power (ACP) and adjacent channel rejection (ACR) compared with the ADF7021-N Programmable IF filter bandwidths: 9 kHz, 13.5 kHz, and 18.5 kHz Modulation schemes: 2FSK, 3FSK, 4FSK, MSK Spectral shaping: Gaussian and raised cosine filtering Data rates: 0.05 kbps to 24 kbps Power supply: 2.3 V to 3.6 V See data sheet for additional Features

24-Bit, 8.5 mW, 109 dB, 128 kSPS/64 kSPS/32 kSPS ADCs Features: Download AD7766-2-KGD Data Sheet. Available as Known Good Die and fully guaranteed in data sheet specifications Oversampled successive approximation (SAR) architecture High performance ac and dc accuracy, low power 115.5 dB dynamic range, 32 kSPS (AD7766-2) 112.5 dB dynamic range, 64 kSPS (AD7766-1) 109.5 dB dynamic range, 128 kSPS (AD7766) −112 dB THD Exceptionally low power 8.5 mW, 32 kSPS (AD7766-2) 10.5 mW, 64 kSPS (AD7766-1) 15 mW, 128 kSPS (AD7766) High dc accuracy 24 bits, no missing codes (NMC) INL: ±6 ppm (typical), ±15 ppm (maximum) Low temperature drift Zero error drift: 15 nV/°C Gain error drift: 0.4 ppm/°C See data sheet for additional features

Low Noise Precision Dual Op Amp Features: Very low noise density of 5 nV/√Hz at 1 kHz maximum  Excellent input offset voltage of 75 μV maximum Low offset voltage drift of 1 μV/°C maximum  Very high gain of 1500 V/mV minimum Outstanding CMR of 106 dB minimum  Slew rate of 2.4 V/μs typical  Gain bandwidth product of 5 MHz typical Industry-standard 8-lead dual pinout

4.0 Gbps Dual Driver

Software Selectable, True Bipolar Input, 8-Channel, 12-Bit Plus Sign A/D Converter Features: 12-Bit plus Sign SAR ADC True Bipolar Input Ranges Software Selectable Input Ranges: ± 10V, ± 5V, ± 2.5V, 0 to 10V Eight Analog Input Channels with Channel Sequencer Single Ended, True Differential and Pseudo Differential Analog Input Capability High Analog Input Impedance Low Power: 26 mW Full Power Signal Bandwidth: >13 MHz Internal 2.5 V Reference High Speed Serial Interface - 1 MSPS Throughput For four and two channel equivalent devices, see AD7324, AD7322

24-Bit, 312 kSPS, 109 dB Sigma-Delta ADC with On-Chip Buffers and Serial Interface Features: High performance 24-bit Σ-Δ ADC 115 dB dynamic range at 78.125 kHz output data rate 109 dB dynamic range at 312.5 kHz output data rate 312.5 kHz maximum fully filtered output word rate Pin-selectable oversampling rates of 64×, 128×, and 256× Low power mode Flexible serial peripheral interface (SPI) Fully differential modulator input On-chip differential amplifier for signal buffering On-chip reference buffer Full band, low-pass, finite impulse response (FIR) filter Overrange alert pin Digital gain correction registers Power-down mode Synchronization of multiple devices via the SYNC pin Daisy chaining

2.1 Maximum On Resistance, 15 V/+12/5 V iCMOS Dual SPST Switches Features: 2.4 maximum on resistance 0.5 maximum on resistance flatness 200 mA continuous current Fully specified at +12 V, ±15 V, ±5 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 10-lead MSOP and 10-lead, 3 mm × 3 mm LFCSP packages