High Performance Fourth Generation DSP Features: 200 MHz core clock speed 2 Mbits of on-chip RAM FIR, IIR, and FFT accelerators Digital Applications Interface (DAI) enabling user-definable access to peripherals including an S/P DIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, and TDM modes Watch Dog Timer Shift Registers 2 SPI-compatible ports supporting master and slave modes UART and Two-Wire Interface 16 Pulse Width Modulation (PWM) channels 3 full-featured timers Small footprint, 88-lead LFCSP and 100-Ld LQFP package options Commercial, Industrial, and automotive temperature ranges available

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

75V DC/DC Converter for APD Bias Features: High Output Voltage: Up to 75V Integrated Schottky Diode 75V, 350mA Internal Switch High Side Fixed Voltage Drop APD Current Monitor Adjustable Frequency: 250kHz to 2MHz Frequency Synchronization Wide VIN Range: 2.7V to 20V Constant-Voltage and Constant-Current Regulation Programmable Current Limit Protection Surface Mount Components Low Shutdown Current <1μA Internal Soft-Start Internal Compensation CTRL Pin Allows Output Adjustment with No Polarity Inversion 3mm × 3mm 16-Lead QFN Package

1 to 8 Output, Multiphase Silicon Oscillator with Spread Spectrum Modulation Features: 1-, 2-, 3-, 4-, 5-, 6-, 7- or 8-Phase Outputs One External Resistor Sets the Output Frequency from 12.5kHz to 6.67MHz Optional Spread Spectrum Frequency for Improved EMI Performance ±10% Frequency Spreading Outputs Can Be Held Low or Floated (Hi-Z) Three Spread Spectrum Modulation Rates fOUT/16, fOUT/32 and fOUT/64 400μA Supply Current Operates from a Single 2.7V to 5.5V Supply Fast Start-Up Time First Cycle Accurate Outputs Are High Impedance Until Frequency Settles MS16 Package

36VIN, 34VOUT High Efficiency Buck-Boost DC/DC Module (Power Module) Regulator Features: Single Inductor Architecture Allows VIN Above, Below or Equal to VOUT Wide VIN Range: 4.5V to 36V Wide VOUT Range: 0.8V to 34V IOUT: 4A DC (10A DC in Buck Mode) Up to 98% Efficiency Current Mode Control Power Good Output Signal Phase-Lockable Fixed Frequency: 200kHz to 400kHz Ultrafast Transient Response Current Foldback Protection Output Overvoltage Protection Small Surface Mount Footprint, Low Profile (15mm × 15mm × 2.82mm) LGA and (15mm × 15mm × 3.42mm) BGA Packages SnPb (BGA) or RoHS Compliant (LGA and BGA) Finish

40MHz to 10GHz RMS Power Detector with 57dB Dynamic Range Features: Frequency Range: 40MHz to 10GHz Linear Dynamic Range: Up to 57dB Accurate RMS Power Measurement of High Crest Factor Modulated Waveforms Exceptional Accuracy Over Temperature: ±0.5dB (Typ) Low Linearity Error within Dynamic Range Single-Ended or Differential RF Inputs Fast Response Time: 90ns Rise Time Low Supply Current: 41.6mA at 3.3V (Typ) Small 3mm × 3mm DFN10 AEC-Q100 Qualified for Automotive Applications

Linear SuperCap Charger with Current-Limited Ideal Diode and V/I Monitor Features: 50mΩ Ideal Diode from VIN to VOUT Smart Charge Current Profile Limits Inrush Current Internal Cell Balancer (No External Resistors) Programmable Output Voltage (LDO Mode) Programmable VIN to VOUT Current Limit Continuous Monitoring of VIN to VOUT Current via PROG Pin Low Quiescent Current: 20μA VIN Power Fail, PGOOD Indicator 2.45V/2.7V Cell Protection Shunts (4.9V/5.4V SuperCap Max Top-Off Voltage) 3A Peak Current Limit, Thermal Limiting Tiny Application Circuit, 3mm × 3mm × 0.75mm DFN and 12-Lead MSOP Packages

Matched Dual-Channel 6GHz RMS Power Detector Features: Frequency Range: 40MHz to 6GHz Linear Dynamic Range: Up to 60dB ±0.5dB (Typ) Accuracy Over Temperature 40dB Channel-to-Channel Isolation at 2GHz Even with Single-Ended RF Inputs Matched Dual-Channel Outputs: <1.25dB (Typ) Single-Ended RF Inputs—No Transformer Required Accurate RMS Power Measurement of High Crest Factor Modulated Waveforms Difference Output Provides VSWR Measurement Fast Envelope Detector Outputs Fast Response Time: 140ns Rise Time Small 4mm × 4mm QFN24 Package 

Two-Supply Diode-OR Current Balancing Controller Features:Shares Load Between Two SuppliesEliminates Need for Active Control of Input SuppliesNo Share Bus RequiredBlocks Reverse CurrentNo Shoot-Through Current During Start-Up or Faults0V to 18V High Side OperationEnable InputsMOSFET On Status OutputsDual Ideal Diode Mode16-Lead DFN (4mm × 3mm) and MSOP Packages

Complete Isolated RS485/RS422 Module Transceiver + Power Features: RS485/RS422 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 20Mbps or Low EMI 250kbps Data Rate High ESD: ±15kV HBM on Transceiver Interface High Common Mode Transient Immunity: 30kV/μs Integrated Selectable 120Ω Termination 3.3V (LTM2881-3) or 5.0V (LTM2881-5) Operation 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface Maximum Continuous Working Voltage: 560VPEAK High Input Impedance Failsafe RS485 Receiver Current Limited Drivers and Thermal Shutdown Compatible with TIA/EIA-485-A and PROFIBUS High Impedance Output During Internal Fault Condition Low Current Shutdown Mode (< 10μA) General Purpose CMOS Isolated Channel 15mm × 11.25mm BGA and LGA Packages