12 Bit Digital to Analog Converter 1 16-PDIP

28 V, 200 mA, Low Noise, Linear Regulator Features: Low noise: 18 μV rms Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3 V Positive or negative enable logic Stable with small 2.2 μF ceramic output capacitor Input voltage range: −2.7 V to −28 V Maximum output current: −200 mA Low dropout voltage: −185 mV at −200 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature +2% maximum/−3% minimum Low quiescent current, IGND = −650 μA with −200 mA load Low shutdown current: −2 μA Adjustable output from −1.22 V to −VIN + VDO Current-limit and thermal overload protection 6- and 8-lead LFCSP and 5-lead TSOT Supported by ADIsimPower tool

Robust, Triple Ch. Isolator W/ Input Disable & 0 Reverse Channels Features: High common-mode transient immunity: 100 kV/µs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Backward compatibility ADuM130E1/ADuM131E1 pin compatible with ADuM1300/ADUM1301 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package See data sheet for additional information

Dual-Channel, 5 kV Isolators with Integrated DC/DC Converter (1/1 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 5 V or 3.3 V output Up to 400 mW output power Dual dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 125 V rms See datasheet for additional features

OVP and EMI Protected, Precision, Low Noise and Bias Current Dual Op Amp Features: Low offset voltage: 60 μV maximum at 25°C (8-lead and 14-lead SOIC) Low offset voltage drift: 1 μV/°C maximum (8-lead and 14-lead SOIC) Low input bias current: 1 nA maximum at 25°C Low voltage noise density: 8 nV/√Hz typical at 1 kHz Large signal voltage gain (AVO): 100 dB minimum over full supply voltage and operating temperature Input overvoltage protection to 32 V above and below the supply voltage rail Integrated EMI filter 70 dB typical rejection at 1000 MHz 90 dB typical rejection at 2400 MHz Rail-to-rail output swing Low supply current: 500 μA typical per amplifier Wide bandwidth Gain bandwidth product (AV = 100): 3.5 MHz typical Unity-gain crossover (AV = 1): 3.5 MHz typical −3 dB bandwidth (AV = 1): 6 MHz typical Dual-supply operation Specified at ±5 V to ±15 V, operates over ±2.5 V to ±18 V Unity-gain stable No phase reversal Long-term offset voltage drift (10,000 hours): 2 μV typical Temperature hysteresis: 2 μV typical

ISM Band Transceiver IC Features: Low Power Zero-IF transceiver Implements complete FSK transceiver solution with few external components. No TRx switch required. Maximum data rate of 384 kbps Operates in Frequency Bands: 431-464 MHz, 862-870 MHz and 902-928 MHz Programmable baseband bandwidths: ±300kHz/±450kHz/±600kHz On-chip 7-bit ADC, temperature sensor and digital RSSI Perfect for price and area sensitive applications Very suitable for wireless audio and video applications

Touch Screen Controllers Touch Screen Controller

Precision Amplifiers SINGLE, PRECISION CMOS RAIL-RAIL OP AMP

Digital to Analog Converters - DAC DAC8412FPC WITH T & R

Operational Amplifiers - Op Amps Dual Low Power Low Noise Rail-Rail OpAmp