Dual 25A or Single 50A DC/DC Module Regulator with 1% DC Accuracy Features: Dual 25A or Single 50A Output Input Voltage Range: 4.5V to 16V Output Voltage Range: 0.6V to 5.5V ±1% Maximum Total DC Output Error Over Line, Load and Temperature Higher Light Load Efficiency and Wider VOUT Range Than LTM4650-1 Differential Remote Sense Amplifier Current Mode Control/Fast Transient Response Multiphase Parallel Current Sharing Up to 300A Internal Temperature Monitor Pin Compatible with the LTM4620A (Dual 13A, Single 26A) and LTM4630A (Dual 18A, Single 36A) Adjustable Switching Frequency or Synchronization Overcurrent Foldback Protection Selectable Burst Mode® Operation, Pulse-Skipping Mode Operation Soft-Start/Voltage Tracking Output Overvoltage Protection 16mm x 16mm x 4.41mm LGA and16mm × 16mm × 5.01mm BGA Package

6.5 V, 500 mA, Ultralow Noise, High PSRR, Fast Transient Response CMOS LDO Features: Input voltage range: 2.3 V to 6.5 V Maximum load current: 500 mA Low noise: 5 μV rms independent of output voltage at 100 Hz to 100 kHz Fast transient response: 1.5 μs for 1 mA to 500 mA load step 60 dB PSRR at 100 kHz Low dropout voltage: 42 mV at 500 mA load, VOUT = 3 V Initial accuracy: ±0.75% Accuracy over line, load, and temperature: ±1.25% Quiescent current, IGND = 0.7 mA at no load Low shutdown current: 0.25 μA at VIN = 5 V Stable with small 4.7 μF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V to 5.0 V Adjustable output from 1.2 V to VIN − VDO Precision enable Adjustable soft start 8-lead, 3 mm × 3 mm LFCSP package Supported by ADIsimPower tool

ANALOGUE MULTIPLEXER 4 TO 1 LFCSP-16; Multiplexer Configuration:4:1; No. of Circuits:2Circuits; On State Resistance Max:200ohm; Supply Voltage Range:12V 15V; Analogue Multiplexer Case:LFCSP; No. of Pins:16Pins; Product Range:- ;RoHS Compliant: Yes

The HMC6505A is a compact gallium arsenide (GaAs),pseudomorphic (pHEMT), monolithic microwave integratedcircuit (MMIC) upconverter in a RoHS compliant package thatoperates from 5.5 GHz to 8.6 GHz. This device provides a smallsignal conversion gain of 15 dB with 22 dBc of sidebandrejection. The HMC6505A uses a variable gain amplifier (VGA)preceded by an in-phase and quadrature (I/Q) mixer that isdriven by an active local oscillator (LO). The IF1 and IF2 mixerinputs are provided, and an external 90° hybrid is needed toselect the required sideband. The I/Q mixer topology reducesthe need for filtering of unwanted sideband. The HMC6505Ais a smaller alternative to hybrid style single sideband (SSB)upconverter assemblies, and it eliminates the need for wirebonding by allowing the use of surface-mount manufacturingtechniques.The HMC6505A is available in 5 mm × 5 mm, 32-terminalleadless chip carrier (LCC) package and operates over a −40°Cto +85°C temperature range. An evaluation board for theHMC6505A is also available upon request. Applications Point to point and point to multipoint radios Military radars, electronic warfare (EW), and electronic intelligence (ELINT) Satellite communications Sensors

Low Quiescent Current eFuse with Surge Protection Features: Withstands Surge Voltages Up to 100V Internal 9mΩ N-Channel MOSFET Guaranteed Safe Operating Area: 20ms at 70V, 1A Low Quiescent Current: 6μA Operating Operates Through Automobile Cold Crank Wide Operating Voltage Range: 4V to 72V No Input TVS Needed Overcurrent Protection Selectable Internal 28.5V/47V or Adjustable Output Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Latchoff and Retry Options Low Retry Duty Cycle During Faults 32-Lead DFN (7mm × 5mm) Package

The AD9204 is a monolithic, dual-channel, 1.8 V supply, 10-bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS analog-to-digital converter (ADC). It features a high performance sample-and-hold circuit and on-chip voltage reference.The product uses multistage differential pipeline architecture with output error correction logic to provide 10-bit accuracy at 80 MSPS data rates and to guarantee no missing codes over the full operating temperature range.The ADC contains several features designed to maximize flexibility and minimize system cost, such as programmable clock and data alignment and programmable digital test pattern generation. The available digital test patterns include built-in deterministic and pseudorandom patterns, along with custom user-defined test patterns entered via the serial port interface (SPI).A differential clock input controls all internal conversion cycles. An optional duty cycle stabilizer (DCS) compensates for wide variations in the clock duty cycle while maintaining excellent overall ADC performance.The digital output data is presented in offset binary, gray code, or twos complement format. A data output clock (DCO) is provided for each ADC channel to ensure proper latch timing with receiving logic. Both 1.8 V and 3.3 V CMOS levels are supported and output data can be multiplexed onto a single output bus.The AD9204 is available in a 64-lead RoHS compliant LFCSP and is specified over the industrial temperature range (−40°C to +85°C).PRODUCT HIGHLIGHTS The AD9204 operates from a single 1.8 V analog power supply and features a separate digital output driver supply to accommodate 1.8 V to 3.3 V logic families. The patented sample-and-hold circuit maintains excellent performance for input frequencies up to 200 MHz and is designed for low cost, low power, and ease of use. A standard serial port interface supports various product features and functions, such as data output formatting, internal clock divider, power-down, DCO/DATA timing and offset adjustments, and voltage reference modes. The AD9204 is packaged in a 64-lead RoHS compliant LFCSP that is pin compatible with the AD9268 16-bit ADC, the AD9251 and AD9258 14-bit ADCs, and the AD9231 12-bit ADC, enabling a simple migration path between 10-bit and 16-bit converters sampling from 20 MSPS to 125 MSPS.APPLICATIONS Communications Diversity radio systems Multimode digital receivers GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA I/Q demodulation systems Smart antenna systems Battery-powered instruments Handheld scope meters Ultrasound Radar/LIDAR PET/SPECT imaging

Voltage References +10V PrecisionBandgap REF

DETECTOR 1MHZ - 10GHZ 62DB LFCSP-32; Frequency Min:1MHz; Frequency Max:10GHz; Input Power Min:-; Input Power Max:-; Sensitivity: 0.25dB; RF IC Case Style:LFCSP; No. of Pins:32Pins; Supply Voltage Min:3.3V; Supply Voltage Max:5.5V;RoHS Compliant: Yes

LDO VOLTAGE REGULATOR ADJUSTABLE 0.8V-5V 1A LFCSP-8; Output Type:Adjustable; Input Voltage Min:2.5V; Input Voltage Max:5.5V; Fixed Output Voltage Nom.:-; Adjustable Output Voltage Min:800mV; Adjustable Output Voltage Max:5V ;RoHS Compliant: Yes

The AD826 is a dual, high speed voltage feedback op amp. It is ideal for use in applications which require unity gain stability and high output drive capability, such as buffering and cable driving. The 50 MHz bandwidth and 350 V/µs slew rate make the AD826 useful in many high speed applications including: video, CATV, copiers, LCDs, image scanners and fax machines. The AD826 features high output current drive capability of 50 mA min per amp, and is able to drive unlimited capacitive loads. With a low power supply current of 15 mA max for both amplifiers, the AD826 is a true general purpose operational amplifier.The AD826 is ideal for power sensitive applications such as video cameras and portable instrumentation. The AD826 can operate from a single +5V supply, while still achieving 25 MHz of bandwidth. Furthermore the AD826 is fully specified from a single +5V to ±15V power supplies.The AD826 excels as an ADC/DAC buffer or active filter in data acquisition systems and achieves a settling time of 70 ns to 0.01%, with a low input offset voltage of 2mV max. The AD826 is available in small 8-pin plastic mini-DIP and SO packages.