Dual, Simultaneous Sampling, 16-Bit, 4 MSPS, SAR ADCs, Pseudo Differential Input Features: Dual 16-bit/14-bit ADC family Dual simultaneous sampling Pseudo differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 87.5 dB, VREF = 3.3 V external for 16-bit AD7383 83.5 dB, VREF = 3.3 V external for 14-bit AD7384 93.4 dB with RES = 1 and OSR = 8 On-chip oversampling function Resolution boost function INL error (maximum) 2.5 LSBs for 16-bit AD7383 1.0 LSB for 14-bit AD7384 2.5 V internal reference High speed serial interface 40C to +125C operation 16-lead LFCSP, 3 mm 3 mm Alert function

4-Channel, 4 MSPS, 16-Bit Dual Simultaneous Sampling SAR ADC Features: 16-bit, 14-bit, or 12-bit dual simultaneous sampling SAR ADC Single-ended analog inputs 4-channel with 2:1 multiplexers Channel sequencer mode High throughput rate of up to 4 MSPS SNR (typical) 87.5 dB (AD7386), VREF = 3.3 V external 84 dB (AD7387), VREF = 3.3 V external 73.8 dB (AD7388) 93 dB with OSR = 8, VREF = 2.5 V internal (AD7386) On-chip oversampling functions INL (typical) ±1.5 LSB (AD7386) ±0.5 LSB (AD7387) ±0.2 LSB (AD7388) Resolution boost function 2.5 V internal reference at 10 ppm/°C (maximum) Alert function −40°C to +125°C temperature range 16-lead, 3 mm × 3 mm LFCSP

16-Bit 8/10-Channel, Low Voltage, Low Power, Sigma Delta ADC Features: 8-/10-Channel, High Resolution Σ-Δ ADCs 16-Bit Resolution Factory-Calibrated Single Conversion Cycle Setting Programmable Gain Front End Simultaneous 50 Hz and 60 Hz Rejection VREF Select™ Allows Absolute and Ratiometric Measurement Capability Operation Can Be Optimized for Analog Performance (CHOP = 0) or Channel Throughput (CHOP= 1)

16-Bit, Single-Channel, Ultra Low Power, Sigma-Delta A/D Converter Features: 16-bit resolution Power Supply: 2.5 V to 5.25 V operation Normal: 75 µA maximum Power-down: 1 µA maximum RMS noise: 1.5 µV 16-bit p-p resolution Integral nonlinearity: 3.5 ppm typical Simultaneous 50 Hz and 60 Hz rejection Internal clock oscillator VDD monitor channel 10-lead MSOP

Low Cost, High Speed Rail-to-Rail Amplifier (Dual) Features:Low cost single (AD8091) and dual (AD8092) amplifiers Fully specified at +3 V, +5 V, and 5 V supplies Single-supply operation Output swings to within 25 mV of either rail High speed and fast settling on 5 V110 MHz, 3 dB bandwidth (G = +1)145 V/s slew rate50 ns settling time to 0.1% Good video specifications (G = +2)Gain flatness of 0.1 dB to 20 MHz; RL = 150 0.03% differential gain error; RL = 1 k0.03%differential phase error; RL = 1 kLow distortion 80 dBc total harmonic @ 1 MHz; RL = 100 Outstanding load drive capabilityDrives 45 mA, 0.5 V from supply railsDrives 50 pF capacitive load (G = +1) Low power of 4.4 mA per amplifier

Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

Dual 600 MHz, 50 mW Current Feedback Amplifier Features: Excellent video specifications (RL = 150 Ω, G = +2) Gain flatness: 0.1 dB to 60 MHz Differential gain error: 0.01% Differential phase error: 0.02° Low power Maximum power supply current (50 mW): 5.0 mA/amp High speed and fast settling −3 dB bandwidth (G = +1): 600 MHz −3 dB bandwidth (G = +2): 500 MHz Slew rate: 1200 V/μs Settling time to 0.1%: 16 ns Low distortion THD at fC = 5 MHz: −65 dBc Third-order intercept at f1 = 10 MHz: 33 dBm SFDR at f = 5 MHz: −66 dB Crosstalk at f = 5 MHz: −60 dB High output drive Over 70 mA output current Drives up to eight back terminated 75 Ω loads (four loads/side) while maintaining good differential gain/phase performance (0.01%/0.17°) Available in 8-lead SOIC and MSOP packages

50 V, 130 kHz, 32.5 A, Robust, Over-The-Top Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 8 MHz, 1.5 mA per Channel, Robust, Over-The-Top, Precision Op Amps Features: Ultrawide common-mode range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: (VSY): +3.15 V to +50 V (±25 V for PSRR) Low supply current: 1.5 mA per channel (typical) Low input offset voltage: ±40 μV maximum Low input offset voltage drift: ±0.4 μV/°C maximum Low voltage noise: 1/f noise corner: 6 Hz typical 150 nV p-p typical at 0.1 Hz to 10 Hz 7 nV/√Hz typical at 100 Hz (en) High speed GBP: 8 MHz typical Slew rate: 5.5 V/μs typical at ΔVOUT = 25 V Low power shutdown: 20 μA maximum Low input bias current: ±10 nA maximum Large signal voltage gain: 120 dB minimum CMRR: 118 dB, minimum PSRR: 123 dB, minimum Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade)

50 V, 8 MHz, 1.5 mA per Channel, Robust, Over-The-Top, Precision Op Amps Features: Ultrawide common-mode range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: (VSY): +3.15 V to +50 V (±25 V for PSRR) Low supply current: 1.5 mA per channel (typical) Low input offset voltage: ±40 μV maximum Low input offset voltage drift: ±0.4 μV/°C maximum Low voltage noise: 1/f noise corner: 6 Hz typical 150 nV p-p typical at 0.1 Hz to 10 Hz 7 nV/√Hz typical at 100 Hz (en) High speed GBP: 8 MHz typical Slew rate: 5.5 V/μs typical at ΔVOUT = 25 V Low power shutdown: 20 μA maximum Low input bias current: ±10 nA maximum Large signal voltage gain: 120 dB minimum CMRR: 118 dB, minimum PSRR: 123 dB, minimum Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade)