12 Channel Multicell Battery Monitor with Addressable Interface, Generation 4 Features: Pin-Compatible Upgrade from the LTC6804 Measures Up to 12 Battery Cells in Series 1.2mV Maximum Total Measurement Error Stackable Architecture for High Voltage Systems Built-in isoSPI™ Interface 1Mb Isolated Serial Communications Uses a Single Twisted Pair, up to 100 Meters Low EMI Susceptibility and Emissions 290µs to Measure All Cells in a System Synchronized Voltage and Current Measurement 16-Bit ADC with Programmable Noise Filter Engineered for ISO 26262-Compliant Systems Passive Cell Balancing with Programmable Timer 5 General Purpose Digital I/O or Analog Inputs Temperature or other Sensor Inputs Configurable as an I2C or SPI master 4μA Sleep Mode Supply Current 48-Lead SSOP Package AEC-Q100 Qualified for Automotive Applications

LTPoE++/PoE+/PoE PD Forward/Flyback Controller Features: IEEE802.3af/at and LTPoE++™ 90W Powered Device (PD) with Forward/Flyback Controller LT4276A Supports All of the Following Standards: LTPoE++ 38.7W, 52.7W, 70W and 90W IEEE 802.3at 25.5W Compliant IEEE 802.3af up to 13W Compliant LT4276B is IEEE 802.3at/af Compliant LT4276C is IEEE 802.3af Compliant Superior Surge Protection (100V Absolute Maximum) Wide Junction Temperature Range (–40°C to 125°C) Auxiliary Power Support as Low as 9V No Opto-Isolator Required for Flyback Operation External Hot Swap™ N-Channel MOSFET for Lowest Power Dissipation and Highest System Efficiency >94% End-to-End Efficiency with LT4321 Ideal Bridge Available in a 28-Lead 4mm × 5mm QFN Package

LTPoE++/PoE+/PoE PD Forward/Flyback Controller Features: IEEE802.3af/at and LTPoE++™ 90W Powered Device (PD) with Forward/Flyback Controller LT4276A Supports All of the Following Standards: LTPoE++ 38.7W, 52.7W, 70W and 90W IEEE 802.3at 25.5W Compliant IEEE 802.3af up to 13W Compliant LT4276B is IEEE 802.3at/af Compliant LT4276C is IEEE 802.3af Compliant Superior Surge Protection (100V Absolute Maximum) Wide Junction Temperature Range (–40°C to 125°C) Auxiliary Power Support as Low as 9V No Opto-Isolator Required for Flyback Operation External Hot Swap™ N-Channel MOSFET for Lowest Power Dissipation and Highest System Efficiency >94% End-to-End Efficiency with LT4321 Ideal Bridge Available in a 28-Lead 4mm × 5mm QFN Package

Dual 18A or Single 36A Module (Power Module) Regulator with 0.8% DC and 3% Transient Accuracy Features:±0.8% Maximum Total DC Output Error Over Line, Load and Temperature (LTM4630-1A)±3% Transient Output Error with Minimum Output CapacitanceDual 18A or Single 36A Output4.5V to 15V Input, 0.6V to 1.8V Output Voltage RangeDifferential Remote Sense AmplifierCurrent Mode Control/Fast Transient ResponseCurrent Sharing Up to 144A16mm × 16mm × 5.01mm BGA Package

Multi-Sensor High Accuracy Digital Temperature Measurement System Features: Directly Digitize RTDs, Thermocouples, Thermistors, and Diodes Single 2.85V to 5.25V Supply Results Reported in °C or °F 20 Flexible Inputs Allow Interchanging Sensors Automatic Thermocouple Cold Junction Compensation Built-In Standard and User-Programmable Coefficients for Thermocouples, RTDs and Thermistors Configurable 2-, 3- or 4-Wire RTD Configurations Measures Negative Thermocouple Voltages Automatic Burn Out, Short-Circuit and Fault Detection Buffered Inputs Allow External Protection Simultaneous 50Hz/60Hz Rejection Includes 10ppm/°C (max) Reference (I-Grade)

60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller Features:Wide VIN Range: 4V to 60V (65V Abs Max)Low Operating IQ: 50μA (One Channel On)Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 24VRSENSE or DCR Current SensingOut-of-Phase Controllers Reduce Input Capacitance and Power Supply Induced NoisePhase-Lockable Frequency (75kHz to 850kHz)Programmable Fixed Frequency (50kHz to 900kHz)Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode® Operation at Light LoadsVery Low Dropout Operation: 99% Duty CycleAdjustable Output Voltage Soft-Start or TrackingPower Good Output Voltage MonitorLow Shutdown IQ: <14μAInternal LDO Powers Gate Drive from VIN or EXTVCCNarrow SSOP Package

16-/14-/11-Bit 2.7Gsps DACs Features:80dBc SFDR at 50MHz fOUT>68dBc SFDR from DC to 1080MHz fOUT40mA Nominal Full-Scale, ±1V Output Compliant10mA to 60mA Adjustable Full-Scale Current RangeSingle or Dual Port DDR LVDS and DHSTL InterfaceLow Latency (7.5 Cycles for Single Port, 11 Cycles for Dual Port)>78dBc 2-Tone IMD from DC to 1000MHz fOUT–156dBc/Hz Additive Phase Noise at 1MHz Offset for 65MHz fOUT170-Lead (9mm × 15mm) BGA Package

16-/14-/11-Bit 2.7Gsps DACs Features:80dBc SFDR at 50MHz fOUT>68dBc SFDR from DC to 1080MHz fOUT40mA Nominal Full-Scale, ±1V Output Compliant10mA to 60mA Adjustable Full-Scale Current RangeSingle or Dual Port DDR LVDS and DHSTL InterfaceLow Latency (7.5 Cycles for Single Port, 11 Cycles for Dual Port)>78dBc 2-Tone IMD from DC to 1000MHz fOUT–156dBc/Hz Additive Phase Noise at 1MHz Offset for 65MHz fOUT170-Lead (9mm × 15mm) BGA Package

Nanopower Buck-Boost DC/DC with Energy Harvesting Battery Charger Features: Dual Input, Single Output DC/DCs with Input Prioritizer Energy Harvesting Input: 3.0V to 19V Buck DC/DC Battery Input: Up to 4.2V Buck-Boost DC/DC 10mA Shunt Battery Charger with Programmable Float Voltages: 3.45V, 4.0V, 4.1V, 4.2V Low Battery Disconnect Ultra Low Quiescent Current: 950nA at no Load Integrated Supercapacitor Balancer Up to 50mA of Output Current Programmable DC/DC Output Voltage, Buck UVLO, and Buck-Boost Peak Input Current Integrated Low-Loss Full-Wave Bridge Rectifier Input Protective Shunt: Up to 25mA at VIN ≥ 20V 5mm × 5mm QFN-32 Package

Active Clamp Synchronous Forward Controller Features: Input Voltage Range: 8.5V to 100V Programmable Volt-Second Clamp High Efficiency Control: Active Clamp, Synchronous Rectification, Programmable Delays Short-Circuit (Hiccup Mode) Overcurrent Protection Programmable Soft-Start/Stop Programmable OVLO and UVLO with Hysteresis Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock