24-Bit, 8.5 mW, 109 dB, 128 kSPS/64 kSPS/32 kSPS ADCs Features: Download AD7766-2-KGD Data Sheet. Available as Known Good Die and fully guaranteed in data sheet specifications Oversampled successive approximation (SAR) architecture High performance ac and dc accuracy, low power 115.5 dB dynamic range, 32 kSPS (AD7766-2) 112.5 dB dynamic range, 64 kSPS (AD7766-1) 109.5 dB dynamic range, 128 kSPS (AD7766) −112 dB THD Exceptionally low power 8.5 mW, 32 kSPS (AD7766-2) 10.5 mW, 64 kSPS (AD7766-1) 15 mW, 128 kSPS (AD7766) High dc accuracy 24 bits, no missing codes (NMC) INL: ±6 ppm (typical), ±15 ppm (maximum) Low temperature drift Zero error drift: 15 nV/°C Gain error drift: 0.4 ppm/°C See data sheet for additional features

2.5 V to 5.5 V, 500 A, Quad Voltage Output 10-Bit DAC in 10-Lead Packages Features: 4 buffered 10-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±4 LSB INL, B Version: ±2.5 LSB INL Low power operation: 500 µA @ 3 V, 600 µA @ 5 V 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 80 nA @ 3 V, 200 nA @ 5 V Double-buffered input logic Output range: 0 V to VREF Power-on reset to 0 V Simultaneous update of outputs (LDAC function) Low power-, SPI®-, QSPI™-, MICROWIRE™-, and DSP-compatible 3-wire serial interface On-chip, rail-to-rail output buffer amplifiers Temperature range –40°C to +105°C Qualified for automotive applications

LC2MOS 16-Bit Voltage Output DAC Features: 16-bit monotonicity over temperature ±2 LSBs integral linearity error Microprocessor compatible with readback capability Unipolar or bipolar output Multiplying capability Low power (100 mW typical)

Integrated, Precision Battery Sensor for Automotive Features: High precision ADC Dual channel, simultaneous sampling, 16-bit Σ-Δ ADCs Programmable ADC throughput from 10 Hz to 1 kHz On-chip 5 ppm/ºC voltage reference Current channel Fully differential, buffered input Programmable gain ADC input range: −200 mV to +300 mV Digital comparator with current accumulator feature Voltage channel Buffered, on-chip attenuator for 12 V battery input JTAG port supports code download and debug Memory 64 kB Flash/EE memory options, 4-kB SRAM 10,000-cycle Flash/EE endurance, 20-year Flash/EE retention In-circuit download via JTAG and LIN On-chip peripherals LIN 2.1-compatible slave SPI GPIO port 1 × general-purpose timer Wake-up and watchdog timers On-chip power-on-reset See data sheet for additional features

2 x 2 W, Filterless, Stereo, Class-D Audio Amplifier with ALC + I2C Features: Filterless, stereo, Class-D amplifier with Σ-Δ modulation 2 W into 4 Ω load and 1.4 W into 8 Ω load at 5.0 V supply with <1% total harmonic distortion plus noise (THD + N) Highly configurable I2C interface for gain adjust, automatic level control (ALC), and ultralow EMI emissions mode MODE pin can disable I2C interface for more traditional stereo amplifier configuration Stereo-to-mono mixer option via I2C control 93% efficiency at 5.0 V, 1.4 W into 8 Ω speaker Signal-to-noise ratio (SNR): >100 dB Single-supply operation from 2.5 V to 5.5 V Ultralow shutdown current: 20 nA Short-circuit and thermal protection Pop-and-click suppression Available in 16-ball, 2.0 mm × 2.0 mm WLCSP

Low Noise Micropower Precision Voltage Reference (2.5 V) Features: Supply Range 2.8 V to 15 V, ADR291 4.4 V to 15 V, ADR292 Supply Current 12 µA Max Low-Noise 8 µV and 12 µVP-P (0.1 Hz to 10 Hz) High Output Current 5 mA Temperature Range -40ºC to +125ºC Pin Compatible with REF02 / REF191

High Accuracy Ultralow Quiescent Current, 1A, anyCAP Dropout Regulator Features: High Accuracy Over Line and Load: ±0.8% @ 25°C, ±1.4% Over Temperature Ultralow Dropout Voltage: 190 mV (Typ) @ 1 A Requires Only CO = 1 µF for Stability anyCAP = Stable with Any Type of Capacitor (Including MLCC) Current and Thermal Limiting Low Noise 2.7 V to 8 V Supply Range –40°C to +85°C Ambient Temperature Range SOT-223 Package

Low Noise Precision Dual Op Amp Features: Very low noise density of 5 nV/√Hz at 1 kHz maximum  Excellent input offset voltage of 75 μV maximum Low offset voltage drift of 1 μV/°C maximum  Very high gain of 1500 V/mV minimum Outstanding CMR of 106 dB minimum  Slew rate of 2.4 V/μs typical  Gain bandwidth product of 5 MHz typical Industry-standard 8-lead dual pinout

4.0 Gbps Dual Driver

Low Cost, 300 MHz Rail-to-Rail Amplifier (Single with Disable) Features: Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V supplies Input voltage range = −0.2 V to +3.2 V with Vs = 5 V Excellent video specifications (RL = 150 Ω, G = 2) Gain flatness: 0.1 dB to 30 MHz 0.01% differential gain error 0.04° differential phase error 35 ns overload recovery Low power 6.8 mA/amplifier typical supply current 400 μA when disabled