1.6GHz to 2.7GHz High Dynamic Range Downconverting Mixer Features: Conversion Gain: 8dB at 2.4GHz IIP3: 26.8dBm at 2.4GHz Noise Figure: 9.9dB at 2.4GHz 17.3dB NF Under +5dBm Blocking High Input P1dB 3.3V Supply, 660mW Power Consumption Shutdown Pin 50Ω Single-Ended RF and LO Inputs LO Inputs 50Ω Matched when Shutdown High Isolation LO Switch 0dBm LO Drive Level High LO-RF and LO-IF Isolation Small Solution Size 20-Lead (5mm × 5mm) QFN package

1.5A, 15V Monolithic Synchronous Step-Down Regulator Features: 4V to 15V Operating Input Voltage Range 1.5A Output Current Up to 96% Efficiency Very Low Duty Cycle Operation: 5% at 2.25MHz Adjustable Switching Frequency: 800kHz to 4MHz External Frequency Synchronization Current Mode Operation for Excellent Line and Load Transient Response User Selectable Burst Mode® (No Load IQ = 300μA) or Forced Continuous Operation 0.6V Reference Allows Low Output Voltages Short-Circuit Protected Output Voltage Tracking Capability Programmable Soft-Start Power Good Status Output Available in Small, Thermally Enhanced, 16-Pin QFN (3mm × 3mm) and MSOP Packages

Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference 2.5V Full-Scale 10ppm/°C (LTC2636-L) 4.096V Full-Scale 10ppm/°C (LTC2636-H) Maximum INL Error: 2.5LSB (LTC2636-12) Low Noise: 0.75mVP-P 0.1Hz to 200KHz Guaranteed Monotonic Over –40°C to 125°C Temperature Range Selectable Internal or External Reference 2.7V to 5.5V Supply Range (LTC2636-L) Ultralow Crosstalk Between DACs (<2.4nV•s) Low Power: 0.9mA at 3V (LTC2636-L) Power-On-Reset to Zero-Scale/Mid-Scale Double-Buffered Data Latches Tiny 14-Lead 4mm × 3mm DFN and 16-Lead MSOP Packages

4A, 4MHz Monolithic Synchronous Step-Down DC/DC Converter Features:4A Output Current2.25V to 5.5V Input Voltage RangeLow Output Ripple Burst Mode® Operation: IQ = 75μA±1% Output Voltage AccuracyOutput Voltage Down to 0.6VHigh Efficiency: Up to 95%Low Dropout Operation: 100% Duty CycleProgrammable Slew Rate on SW Node Reduces Noise and EMIAdjustable Switching Frequency: Up to 4MHzOptional Active Voltage Positioning (AVP) with Internal CompensationSelectable Pulse-Skipping/Forced Continuous/Burst Mode Operation with Adjustable Burst ClampProgrammable Soft-StartInputs for Start-Up Tracking or External ReferenceDDR Memory Mode, IOUT = ±3AAvailable in a 24-Pin 3mm × 5mm QFN Thermally Enhanced Package

Independent Multicell Battery Stack Fault Monitor Features: Qualified for Automotive Applications Monitors Up to 12 Li-Ion Cells in Series (60V Max) Stackable Architecture Enables > 1000V Systems 1% Maximum Overvoltage Detection Level Error Adjustable Overvoltage and Undervoltage Detection Self Test Features Guarantee Accuracy Robust Fault Detection Using Differential Signals Simple Pin-Strapped Configuration Allows Battery Monitoring without a Microcontroller 15.5ms to Monitor All Cells in a System Programmable Response Time Two Temperature Monitor Inputs Low Power Idle Mode 36-Lead SSOP Package

62V, 350mA Step-Down Regulator with 2.5A Quiescent Current and Integrated Diodes Features: Low Ripple Burst Mode® Operation 2.5μA IQ at 12VIN to 3.3VOUT Output Ripple < 5mVP-P Wide Input Voltage Range: 4.2V to 62V Operating Adjustable Switching Frequency: 200kHz to 2.2MHz Integrated Boost and Catch Diodes 350mA Output Current Fixed Output Voltages: 3.3V, 5V 2μA IQ at 12VIN Accurate Programmable Undervoltage Lockout FMEA Fault Tolerant (MSOP Package) Output Stays at or Below Regulation Voltage During Adjacent Pin Short or When a Pin is Left Floating Low Shutdown Current: IQ = 0.7μA Internal Sense Limits Catch Diode Current Power Good Flag Small, Thermally Enhanced 16-Pin MSOP and (3mm × 3mm) DFN Packages

Very High Linearity Active Mixer Features: Wideband Output Frequency Range to 3.7GHz +24.2dBm IIP3 at 1.95GHz RF Output Low LO Leakage: –42dBm Integrated LO Buffer: Low LO Drive Level Single-Ended LO Drive Wide Single Supply Range: 3.15V to 5.25V Double-Balanced Active Mixer Shutdown Function 16-Lead (4mm × 4mm) QFN Package

3A, 4MHz, Monolithic Synchronous Step-Down Regulator Features: High Efficiency: Up to 95% 3A Output Current Low Quiescent Current: 64μA Low RDS(ON) Internal Switch: 77mΩ 2.25V to 5.5V Input Voltage Range Programmable Frequency: 300kHz to 4MHz ±2% Output Voltage Accuracy 0.8V Reference Allows Low Output Voltage Selectable Forced Continuous/Burst Mode® Operation with Adjustable Burst Clamp Synchronizable Switching Frequency Low Dropout Operation: 100% Duty Cycle Power Good Output Voltage Monitor Overtemperature Protected Available in 16-Lead Exposed Pad TSSOP and QFN Packages

Dual 550kHz Synchronous 2-Phase DC/DC Controller with Programmable Up/Down Tracking Features: Wide VIN Range: 3V to 30V Operation with Line Feedforward Compensation Leading Edge Modulation Architecture for Extremely Low Duty Cycle Operation Phase-Lockable Fixed Frequency: 330kHz to 750kHz Two 180° Out-of-Phase Controllers Fast Programmable Power-Up/-Down Tracking Programmable Current Limit Without External Current Sense Resistor Optional Burst Mode® Operation at Light Load ±1% 0.6V Voltage Reference External N-Channel MOSFET Architecture Low Shutdown Current: <100µA Overvoltage Protection and PGOOD Flag Small 28-Lead SSOP and 32-Lead QFN Packages

40MHz to 900MHz Quadrature Demodulator Features: RF Input Frequency Range: 40MHz to 900MHz High IIP3: 21dBm at 800MHz High IIP2: 58dBm at 800MHz I/Q Gain Mismatch: 0.3dB Max I/Q Phase Mismatch: 0.7° Noise Figure: 12.4dB at 800MHz Conversion Gain: 3.3dB at 800MHz Baseband Bandwidth: 130MHz Single Ended, 50 Matched 2XLO Input Shutdown Mode 16-Lead QFN (4mm × 4mm) Package with Exposed Pad