400 MHz Low Cost Blackfin Processor Features: Performance to 400MHz/800MMACs enables multi-channel audio plus CIF video processing in multimedia applications Enhanced Dynamic Power Management with on-chip core voltage regulation allows operation to 0.8V extending battery life in portable applications Application-tuned peripherals provide glueless connectivity to general purpose converters in data acquisition applications Multiple low cost, pin- and code-compatible derivatives enable software differentiation in cost-sensitive consumer applications

Dual, Ultralow Noise Variable Gain Amplifier Features: Ultralow input noise at maximum gain: 0.80 nV/√Hz, 3.0 pA/√Hz Two independent linear-in-dB channels Absolute gain range per channel programmable: 0 dB to 48 dB (preamp gain = 14 dB) through 6 dB to 54 dB (preamp gain = 20 dB) ±1.0 dB gain accuracy Bandwidth: 40 MHz (−3 dB) 300 kΩ input resistance Variable gain scaling: 20 dB/V through 40 dB/V Stable gain with temperature and supply variations Single-ended unipolar gain control Power shutdown at lower end of gain control Drive ADCs directly

Micropower, Precision, Auto Qualified 4.096V Voltage Reference Features: Max temperature coefficient (TC) of 5ppm/ºC (B grade) Max temperature coefficient (TC) of 8 ppm/°C (A grade) Initial output voltage error: ±0.1% (maximum) Operating temperature range: −40°C to +125°C Output current: +10 mA source/−3 mA sink Low quiescent current: 100 μA (maximum) Long term drift: 30 ppm (initial 1 khr typical) Low dropout voltage: 250 mV at 2 mA Output noise (0.1 Hz to 10 Hz): 29μVp-p at 4.096V (typical) Qualified for automotive applications

DC/DC CTRL SYNC BUCK 1.5MHZ LFCSP-32; Supply Voltage Min:2.75V; Supply Voltage Max:20V; No. of Outputs:2 Output; Duty Cycle (%):50%; Controller IC Case Style:LFCSP; No. of Pins:32Pins; Switching Frequency:1.5MHz; Topology:Synchronous Buck (Step Down); Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Cut Tape; Product Range:ADP1850 Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); No. of Outputs:2Outputs

Low Voltage Temperature Sensors

Dual Power PLL Frequency Synthesizer Features: IDD total, 7.5 mA Bandwidth RF/IF, 2.4 GHz/1.0 GHz 2.7 V to 3.3 V power supply Separate VP allows extended tuning voltage Programmable dual modulus prescaler RF and IF: 8/9, 16/17, 32/33, 64/65 Programmable charge pump currents 3-wire serial interface Analog and digital lock detect Fastlock mode Power-down mode 20-lead TSSOP and 20-lead LFCSP packages

Ultralow Noise, LDO XFET 3.0V Voltage Reference w/Current Sink and Source Features: Ultralow noise (0.1 Hz to 10 Hz) ADR440: 1 μV p-p ADR441: 1.2 μV p-p ADR443: 1.4 μV p-p ADR444: 1.8 μV p-p ADR445: 2.25 μV p-p Superb temperature coefficient A Grade: 10 ppm/°C B Grade: 3 ppm/°C Low dropout operation (supply voltage headroom): 500 mV Input range: (VOUT + 500 mV) to 18 V High output source and sink current +10 mA and −5 mA, respectively Wide temperature range: −40°C to +125°C

5 kV Signal Isolated, ESD Protected, 500 kbps, Full/Half Duplex RS-485 Transceiver Features: Isolated, RS-485/RS-422 transceiver, configurable as half- or full-duplex ±15 kV ESD protection on RS-485 input/output pins 500 kbps data rate Complies with ANSI TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E) Suitable for 5 V or 3.3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs True fail-safe receiver inputs 256 nodes on the bus Thermal shutdown protection Safety and regulatory approvals UL recognition 5000 V rms isolation voltage for 1 minute per UL1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 Reinforced insulation, VIORM = 849 VPEAK CSA Component Acceptance Notice 5A IEC 60950-1: 380 V rms (reinforced) Operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package

True Accuracy, 16-Bit 12 V/15 V, Serial Input Voltage Output D/A Converter Features: Full 16-bit performance 1 LSB max INL and DNL Output voltage range up to ±14 V On-board reference buffers, eliminating the need for a negative reference Temperature ranges of −40°C to +85°C for A/B version/−40°C to +125°C for W/Y version Controlled output during power-on Settling time of 10 µs to 0.003% Clear function to 0 V Asynchronous update of outputs (LDAC pin) Power-on reset Serial data output for daisy chaining Data readback facility

Dual 14-Bit, 20/40/65 MSPS, 3 V Analog-to-Digital Converter Features: Integrated Dual 14-Bit Analog-to-Digital Converters Single 3 V Supply Operation (2.7 V to 3.6 V) SNR = 71.6 dBc (to Nyquist, AD9248-65) SFDR = 80 dBc (to Nyquist, AD9248-65) Low Power: 300 mW at 65 MSPS Differential Input with 500 MHz 3 dB Bandwidth Exceptional Cross Talk Immunity > 85 dB On-Chip Reference and SHA Flexible Analog Input: 1 Vp-p to 2 Vp-p Range Offset Binary or Twos Complement Data Format Clock Duty Cycle Stabilizer Output datamux option