The HMC652LP2E / 653LP2E / 654LP2E / 655LP2E are a line of wideband fixed value SMT 50 Ohm matched attenuators which offer attenuation levels of 2, 3, 4 and 6 dB respectively. These passive attenuators are ideal for military, test equipment, and other wideband applications where extremely flat attenuation, and excellent VSWR vs. frequency are required.These wideband attenuators handle up to +25 dBm of input power, and are compatible with high volume surface mount manufacturing techniques.APPLICATIONS Fiber Optics Microwave Radio Military & Space Test & Measurement Scientific Instruments RF/Microwave Circuit Prototyping

Micropower Low Noise Boost Converters with Output Disconnect Features: Low Quiescent Current 65µA in Active Mode 1µA in Shutdown Mode Switching Frequency is Non-Audible Over Entire Load Range Integrated Power NPN: 350mA Current Limit (LT3494A) 180mA Current Limit (LT3494) Integrated Schottky Diode Integrated Output Disconnect Integrated Output Dimming Wide Input Range: 2.3V to 16V Wide Output Range: Up to 40V Tiny 8-Lead 3mm × 2mm DFN Package

Power Management IC Development Tools LTM8025EV Demo Board 36Vin , 3A Step Down uModule Converter

The ADXRS642 is a complete angular rate sensor (gyroscope) that uses the Analog Devices, Inc., surface-micromachining process to make a functionally complete and low cost angular rate sensor integrated with all of the required electronics on one chip. The manufacturing technique for this device is a patented high volume BiMOS process with years of proven field reliability.The ADXRS642 is an industrial grade gyroscope that is 100% pin, package, temperature, and function compatible with the ADXRS622 and ADXRS652, while offering enhanced vibration rejection.The output signal, RATEOUT (1B, 2A), is a voltage proportional to angular rate about the axis normal to the top surface of the package. The measurement range is a minimum of ±250°/s. The output is ratiometric with respect to a provided reference supply. Other external capacitors are required for operation.A temperature output is provided for compensation techniques. Two digital self-test inputs electromechanically excite the sensor to test proper operation of both the sensor and the signal conditioning circuits. The ADXRS642 is available in a 7 mm × 7 mm × 3 mm BGA chip-scale package.APPLICATIONS Industrial applications Inertial Measurement Units Severe Mechanical Environments Platform stabilization

The ADG444 is a monolithic CMOS device comprising four independently selectable switches. It is designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.The ADG444 switches are turned on with a logic low on the appropriate control input. Each switch conducts equally well in both directions when ON and each has an input signal range that extends to the supplies. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

IC VOLT REGULATOR FIXED +3V BIPOLAR TSOP 6PIN PLASTIC

The ADG1334 is a monolithic CMOS device comprising of fourindependently selectable SPDT switches designed on a CMOSprocess.When the switches are on, each switch conducts equally well inboth directions and has an input signal range that extends to thepower supplies. In the off condition, signal levels up to thesupplies are blocked. All switches exhibit break-before-makeswitching action for use in multiplexer applications. Inherent inthe design is the low charge injection for minimum transientswhen switching the digital inputs.Fast switching speed coupled with high signal bandwidth makesthe part suitable for video signal switching. CMOS constructionensures ultralow power dissipation, making the part ideallysuited for portable and battery-powered instruments.PRODUCT HIGLIGHTS 3 V logic compatible digital input VIH = 2.0 V, VIL = 0.8 V. 2. No VL logic power supply required. Low power consumption. 20-lead SSOPAPPLICATIONS Audio and Video Routing Battery-powered Systems Signal Routing

The ADF4159 is a 13 GHz, fractional-N frequency synthesizer with modulation and both fast and slow waveform generation capability. The part uses a 25-bit fixed modulus, allowing subhertz frequency resolution.The ADF4159 consists of a low noise digital phase frequency detector (PFD), a precision charge pump, and a programmable reference divider. The Σ-Δ-based fractional interpolator allows programmable fractional-N division. The INT and FRAC registers define an overall N divider as N = INT + (FRAC/225).The ADF4159 can be used to implement frequency shift keying (FSK) and phase shift keying (PSK) modulation. Frequency sweep modes are also available to generate various waveforms in the frequency domain, for example, sawtooth and triangular waveforms. Sweeps can be set to run automatically, or each step manually triggered by an external pulse. The ADF4159 features cycle slip reduction circuitry, which enables faster lock times without the need for modifications to the loop filter.Control of all on-chip registers is via a simple 3-wire interface. The ADF4159 operates with an analog power supply in the range of 2.7 V to 3.45 V and a digital power supply in the range of 1.62 V to 1.98 V. The device can be powered down when not in use.ApplicationsCommunications infrastructureCommunications test equipmentInstrumentationFMCW radars

DATA CONVERSION DEVELOPMENT KITS - ADC;

42V, 2.5A Synchronous Step-Down Regulator with 2.5A Quiescent Current Features: Wide Input Voltage Range: 3.4V to 42V Ultralow Quiescent Current Burst Mode® Operation: 2.5μA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P High Efficiency Synchronous Operation: 96% Efficiency at 1A, 5VOUT from 12VIN 94% Efficiency at 1A, 3.3VOUT from 12VIN Fast Minimum Switch-On Time: 50ns Low Dropout Under All Conditions: 200mV at 1A Allows Use Of Small Inductors Low EMI Adjustable and Synchronizable: 200kHz to 2.2MHz Current Mode Operation Accurate 1V Enable Pin Threshold Internal Compensation Output Soft-Start and Tracking Small Thermally Enhanced 16-Lead MSOP Package AEC-Q100 Qualified for Automotive Applications