12-Bit Power Amplifier Current Controller with ADC, DACs, Temperature and Current Sensors Features: 4 closed-loop power amplifier (PA) drain current controllers Built-in PA protection, sequencing, and alert features Compatible with both depletion mode and enhancement mode power amplifiers Highly integrated 4 uncommitted 12-bit analog-to-digital converter (ADC) inputs ±0.5 LSB typical integral nonlinearity (INL) Eight 12-bit voltage digital-to-analog converters (DACs) 1.3 μs maximum settling 4 high-side current sense amplifiers, ±0.1% gain error 2 external temperature sensor inputs, ±1.1°C accuracy Internal temperature sensor, ±1.25°C accuracy 2.5 V on-chip reference Flexible monitoring and control ranges ADC input ranges: 0 V to 1.25 V, 0 V to 2.5 V, and 0 V to 5 V Bipolar DAC ranges: 0 V to +5 V, −4 V to +1 V, and −5 V to 0 V Bipolar DAC reset and clamping relative to VCLAMPx voltage Unipolar DAC ranges: 0 V to 5 V, 2.5 V to 7.5 V, and 5 V to 10 V Current sense gain: 6.25, 12.5, 25, 50, 100, and more Adjustable closed-loop setpoint ramp time High-side voltage current sensing 4 current sense inputs 4 V to AVSS + 60 V, ±200 mV input range Small package and flexible interface Serial port interface (SPI) with VDRIVE supporting 1.8 V, 3 V, and 5 V interfaces 56-lead LFCSP Temperature range: −40°C to +125°C

16-Bit, Isolated Sigma-Delta Modulator, LVDS Interface Features: 5 MHz to 20 MHz external clock input rate 16 bits, no missing codes Signal-to-noise ratio (SNR): 88 dB typical Effective number of bits (ENOB): 14.2 bits typical Typical offset drift vs. temperature: 1.6 μV/°C typical LVDS interface On-board digital isolator On-board reference Full-scale analog input range: ±320 mV −40°C to + 125°C operating range High common-mode transient immunity: >25 kV/μs 16-lead, wide-body SOIC, with increased creepage package See data sheet for additional features

4-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC Features: 4 simultaneously sampled inputs True bipolar analog input ranges: ±10 V (maximum), ±5 V (maximum) Single 5 V analog supply and 2.5 V to 5 V VDRIVE (nominal) Fully integrated data acquisition solution Analog input clamp protection Input buffer with 1 MΩ analog input impedance Second-order antialiasing analog filter On-chip accurate reference and reference buffer 16-bit ADC with 300 kSPS on all channels Flexible parallel/serial interface Serial peripheral interface (SPI)/QSPI™/MICROWIRE™/DSP compatible Performance 7 kV ESD rating on analog input channels Standby mode: 25 mW (typical) 64-lead LQFP package

8-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC Features: 8/6/4 simultaneously sampled inputs True bipolar analog input ranges: ±10 V, ±5 V Pin to pin compatible with the state-of-the-art AD7606B Single 5 V analog supply and 2.3 V to 5 V VDRIVE Fully integrated data acquisition solution Analog input clamp protection Input buffer with 1 MΩ analog input impedance Second-order antialiasing analog filter On-chip accurate reference and reference buffer 16-bit ADC with 200 kSPS on all channels Oversampling capability with digital filter Flexible parallel/serial interface SPI/QSPI™/MICROWIRE™/DSP compatible Performance 7 kV ESD rating on analog input channels 95.5 dB SNR, −107 dB THD ±0.5 LSB INL, ±0.5 LSB DNL Low power: 100 mW Standby mode: 25 mW Temperature range: −40°C to +85°C 64-lead LQFP packageAD7606-EP supports defense and aerospace applications (AQEC standard) Download AD7606-EP data sheet (pdf) Military temperature range −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/18611

Low Cost, 4-Channel, 16-Bit, 500 kSPS PulSAR ADC Features: 4-channel, 16-bit resolution ADC 2 track-and-hold amplifiers Throughput 500 kSPS (normal mode) 444 kSPS (impulse mode) Analog input voltage range: 0 V to 5 V No pipeline delay Parallel and serial 5 V/3 V interface Refer to data sheet for additional featuresAD7655-EP supports defense and aerospace applications (AQEC standard) Download AD7655-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/14620 DSCC Drawing Number

16-Bit, 100 kSPS PulSAR, Differential ADC in MSOP Features: 16-bit resolution with no missing codes Throughput: 100 kSPS INL: ±1 LSB typical, ±3 LSB maximum True differential analog input range: ±VREF 0 V to VREF with VREF up to VDD on both inputs Single-supply operation: 2.7 V to 5.5 V Standby current: 1 nA Serial interface SPI®-/QSPI-™/MICROWIRE-™/DSP-compatible Power dissipation  4 mW @ 5 V  1.5 mW @ 2.7 V  150 μW @ 2.7 V/10 kSPS 8-lead MSOP package

16-Bit, 0.5 LSB, 500 kSPS PulSAR Differential A/D Converter in MSOP/QFN Features: 16-bit resolution with no missing codes Throughput: 500 kSPS INL/DNL: ±0.25 LSB typ, ±0.5 LSB max (±8 ppm of FSR) Dynamic range: 96.5 dB SINAD: 96 dB at 1 kHz THD: −120 dB at 1 kHz True differential analog input range: ±VREF 0 V to VREF with VREF up to VDD on both inputs No pipeline delay Single-supply 5 V operation with 1.8 V/2.5 V/3 V/5 V logic interface Proprietary serial interface SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible Daisy-chain multiple ADCs, selectable busy indicator Power dissipation: 40 nJ/conversion 40 μW at 5 V/1 kSPS 4 mW at 5 V/100 kSPS 18 mW at 5 V/500 kSPS Standby current: 1 nA 10-lead package: MSOP (MSOP-8 size) Pin-for-pin compatible with the 16-bit AD7687 and AD7688 and the 18-bit AD7690 and AD7691

3V/5V, 1mW, 3-Channel Pseudo Differential, 16-Bit Sigma-Delta ADC Features: Three Pseudo Differential Input Channel ADCs 16 Bits No Missing Codes 0.003% Nonlinearity Programmable Gain Front End Gains from 1 to 128 Three-Wire Serial Interface SPI®, QSPI™, MICROWIRE™ and DSP Compatible Schmitt Trigger Input on SCLK See data sheet for additional features

24-bit, 2 Channel Capacitance to Digital Converter Features:New standard in single chip solutions Interfaces to single or differential floating sensors Resolution down to 4 aF (that is, up to 21 ENOB) Accuracy: 4 fF Linearity: 0.01% Common-mode (not changing) capacitance up to 17 pF Full-scale (changing) capacitance range: 4 pF Tolerant of parasitic capacitance to ground up to 60 pF Update rate: 10 Hz to 90 Hz Simultaneous 50 Hz and 60 Hz rejection at 16 Hz Temperature sensor on-chip Resolution: 0.1C, accuracy: 2C Voltage input channel Internal clock oscillator 2-wire serial interface (I2C-compatible) Power 2.7 V to 5.25 V single-supply operation 0.7 mA current consumption Operating temperature: 40C to +125C 16-lead TSSOP package

3-Channel, Low Noise, Low Power, 16-Bit, Sigma Delta ADC with On-Chip In-Amp Features: RMSnoise:  27 nV at 4.17 Hz (AD7799)  65 nV at 16.7 Hz (AD7799)  40 nV at 4.17 Hz (AD7798)  85 nV at 16.7 Hz (AD7798) Current: 380 μA typical Power-down: 1 μA maximum Low noise, programmable gain, instrumentation amp Internal clock oscillator Simultaneous 50 Hz/60 Hz rejection Reference detect Low-side power switch Programmable digital outputs Burnout currents Power supply: 2.7 V to 5.25 V Update rate: 4.17 Hz to 470 Hz 3 differential inputs