Standalone Linear Li-Ion Battery Charger with Thermistor Input Features: Charge Current Programmable Up to 1A Charges Single-Cell Li-Ion Batteries Directly from USB Port Preset Charge Voltage with ±0.35% Accuracy Thermistor Input for Temperature Qualified Charging Input Supply Present Logic Output Thermal Regulation Maximizes Charge Rate Without Risk of Overheating Programmable Charge Current Detection/ Termination Programmable Charge Termination Timer Smart Pulsing Error Feature SmartStart™ Prolongs Battery Life 20μA Charger Quiescent Current in Shutdown Available in a Low Profile (0.75mm) 10-Lead (3mm × 3mm) DFN Package

Standalone Linear Li-Ion Battery Charger with Micropower Comparator Features: Charge Current Programmable up to 1A Charges Single Cell Li-Ion Batteries Directly from USB Port Preset Float Voltage with ±0.35% Accuracy Micropower Comparator for Battery Monitoring Thermal Regulation Maximizes Charge Rate Without Risk of Overheating Programmable Charge Current Detection/Termination Programmable Charge Termination Timer Smart Pulsing Error Feature SmartStart™ Prolongs Battery Life 20µA Charger Quiescent Current in Shutdown Available in a Low Profile (0.75mm) 10-Lead (3mm × 3mm) DFN Package

Fast 2-Phase, No RSENSE, Synchronous DC/DC Controller with Tracking/Sequencing Features: PolyPhase® Valley Current Mode Controller Synchronizable to an External Clock with PLL Coincident or Ratiometric Tracking Sense Resistor Optional 2% to 90% Duty Cycle at 200kHz tON(MIN) < 100ns True Remote Sensing Differential Amplifier High Efficiency at Both Light and Heavy Loads Power Good Output Voltage Monitor 0.6V ±1% Reference Adjustable Current Limit Programmable Soft-Start and Operating Frequency Output Overvoltage Protection Optional Short-Circuit Shutdown Timer 32-Lead (5mm × 5mm) QFN Package

800MHz Low Distortion, Low Noise Differential Amplifier ADC Driver (Av = 2V/V) Features: 800MHz −3dB Bandwidth Fixed Gain of 2V/V (6dB) Low Distortion: 38dBm OIP3, –70dBc HD3 (70MHz, 2VP-P) 51dBm OIP3, –94dBc HD3 (10MHz, 2VP-P) Low Noise: 12.3dB NF, en = 3.8nV/√Hz (70MHz) Differential Inputs and Outputs Additional Filtered Outputs Adjustable Output Common Mode Voltage DC- or AC-Coupled Operation Minimal Support Circuitry Required Small 0.75mm Tall 16-Lead 3 × 3 QFN Package

Inverting Micropower DC/DC Converters with Schottky Features: Internal 40V Schottky Diode One Resistor Feedback (Other Resistor Inside) Internal 40V, 200mA/400mA Power Switch Generates Regulated Negative Outputs to –38V Low Quiescent Current: 40μA in Active Mode <1μA in Shutdown Mode Low VCESAT Switch: 200mV at 150mA Wide Input Range: 2.5V to 16V Uses Small Surface Mount Components Output Short-Circuit Protected Available in a 6-Lead SOT-23 (LT3483 Only) and Low Profile 8-Lead DFN (2mm × 2mm × 0.75mm) Packages

Synchronous Buck-Boost High Power White LED Driver Features: High Efficiency: 90% Typical Over Entire Li-Ion Battery Range Wide VIN Range: 2.7V to 5.5V Up to 500mA Continuous Output Current Internal Soft-Start Open/Shorted LED Protection LED Current Matching Typically <2% Constant Frequency 1MHz Operation Low Shutdown Current: 6µA Overtemperature Protection Small Thermally Enhanced 16-Lead (4mm x 4mm) QFN Package

3.3V Single Supply Video Difference Amplifier Features: Differential or Single-Ended Gain Block Wide Supply Range 3V to 12.6V Output Swings Rail-to-Rail Input Common Mode Range Includes Ground 600V/µs Slew Rate –3dB Bandwidth = 75MHz, AV = ±2 CMRR at 10MHz: >60dB Specified on 3.3V, 5V and ±5V Supplies High Output Drive: ±70mA Power Shutdown to 300µA Operating Temperature Range: –40°C to 85°C Available in 8-Lead SO and Tiny 3mm x 3mm x 0.8mm DFN Packages

Dual 14-Bit, 65Msps Low Power 3V ADCs Features: Integrated Dual 14-Bit ADCs Sample Rate: 65Msps/40Msps/25Msps Single 3V Supply (2.7V to 3.4V) Low Power: 400mW/235mW/150mW 74.3dB SNR 90dB SFDR 110dB Channel Isolation at 100MHz Multiplexed or Separate Data Bus Flexible Input: 1VP-P to 2VP-P Range 575MHz Full Power Bandwidth S/H Clock Duty Cycle Stabilizer Shutdown and Nap Modes Pin Compatible Family 105Msps: LTC2282 (12-Bit), LTC2284 (14-Bit) 80Msps: LTC2294 (12-Bit), LTC2299 (14-Bit) 65Msps: LTC2293 (12-Bit), LTC2298 (14-Bit) 40Msps: LTC2292 (12-Bit), LTC2297 (14-Bit) 25Msps: LTC2291 (12-Bit), LTC2296 (14-Bit) 64-Pin (9mm × 9mm) QFN Package

Dual 12-Bit, 65Msps Low Power 3V ADCs Features: Integrated Dual 12-Bit ADCs Sample Rate: 65Msps/40Msps/25Msps Single 3V Supply (2.7V to 3.4V) Low Power: 400mW/235mW/150mW 71.3 dB SNR 90dB SFDR 110dB Channel Isolation at 100MHz Multiplexed or Separate Data Bus Flexible Input: 1VP-P to 2VP-P Range 575MHz Full Power Bandwidth S/H Clock Duty Cycle Stabilizer Shutdown and Nap Modes Pin Compatible Family 105Msps: LTC2282 (12-Bit), LTC2284 (14-Bit) 80Msps: LTC2294 (12-Bit), LTC2299 (14-Bit) 65Msps: LTC2293 (12-Bit), LTC2298 (14-Bit) 40Msps: LTC2292 (12-Bit), LTC2297 (14-Bit) 25Msps: LTC2291 (12-Bit), LTC2296 (14-Bit) 10Msps: LTC2290 (12-Bit), LTC2295 (14-Bit) 64-Pin (9mm × 9mm) QFN Package

Dual 10-Bit, 25Msps Low Noise 3V ADCs Features: Integrated Dual 10-Bit ADCs Sample Rate: 65Msps/40Msps/25Msps Single 3V Supply (2.7V to 3.4V) Low Power: 400mW/235mW/150mW 61.8dB SNR 85dB SFDR 110dB Channel Isolation at 100MHz Multiplexed or Separate Data Bus Flexible Input: 1VP-P to 2VP-P Range 575MHz Full Power Bandwidth S/H Clock Duty Cycle Stabilizer Shutdown and Nap Modes Pin Compatible Family 105Msps: LTC2282 (12-Bit), LTC2280 (10-Bit) 80Msps: LTC2294 (12-Bit), LTC2289 (10-Bit) 65Msps: LTC2293 (12-Bit), LTC2288 (10-Bit) 40Msps: LTC2292 (12-Bit), LTC2287 (10-Bit) 25Msps: LTC2291 (12-Bit), LTC2286 (10-Bit) 64-Pin (9mm × 9mm) QFN Package