The AD8610 (single) and AD8620 (dual) are very high precision JFET input amplifiers featuring ultralow offset voltage and drift, very low input voltage and current noise, very low input bias current, and wide bandwidth. Unlike many JFET amplifiers, the AD8610 input bias current is low over the entire operating temperature range. The AD8610 is stable with capacitive loads of over 1000 pF in noninverting unity gain; much larger capacitive loads can be driven easily at higher noise gains. The AD8610 swings to within 1.2 V of the supplies even with a 1 k Ω load, maximizing dynamic range even with limited supply voltages. Outputs slew at 50 V/µs in either inverting or noninverting gain configurations, and settle to 0.01% accuracy in less than 600 ns. Combined with the high input impedance, great precision, and very high output drive, theAD8610 is an ideal amplifier for driving high performance A/D inputs and buffering D/A converter outputs. Applications for the AD8610 and AD8620 include electronic instruments; ATE amplification, buffering, and integrator circuits; CAT/MRI/Ultrasound medical instrumentation; instrumentation quality photodiode amplification; fast precision filters (including PLL filters); and high quality audio. The AD8610 is fully specified over the extended industrial (-40ºC to +125ºC temperature range. The AD8610 is available in the narrow 8-lead SOIC and the tiny MSOP8 surface-mount packages. The AD8620 is available in the narrow 8-lead SOIC package. MSOP8 packaged devices are available only in tape and reel.

The 12-channel AD8802 / AD8804 provides independent digitally-controllable voltage outputs in a compact 20-lead package. This potentiometer divider TrimDAC® allows replacement of the mechanical trimmer function in new designs. The AD8802 / AD8804 is ideal for dc voltage adjustment applications.Easily programmed by serial interfaced microcontroller ports, the AD8802 with its midscale preset is ideal for potentiometer replacement where adjustments start at a nominal value. Applications such as gain control of video amplifiers, voltage controlled frequencies and bandwidths in video equipment, geometric correction and automatic adjustment in CRT computer graphic displays are a few of the many applications ideally suited for these parts. The AD8804 provides independent control of both the top and bottom end of the potentiometer divider allowing a separate zero-scale voltage setting determined by the VREFL pin. This is helpful for maximizing the resolution of devices with a limited allowable voltage control range.Internally the AD8802/AD8804 contains 12 voltage-output digital-to-analog converters, sharing a common reference-voltage input.Each DAC has its own DAC latch that holds its output state. These DAC latches are updated from an internal serial-to-parallel shift register that is loaded from a standard 3-wire serial input digital interface. The serial-data-input word is decoded where the first 4 bits determine the address of the DAC latches to be loaded with the last 8 bits of data. The AD8802/ AD8804 consumes only 10 µA from 5 V power supplies. In addition, in shutdown mode reference input current consumption is also reduced to 10 µA while saving the DAC latch settings for use after return to normal operation.The AD8802 / AD8804 is available in the 20-pin plastic DIP, the SOIC-20 surface mount package, and the 1 mm thin TSSOP-20 package.APPLICATIONS Automatic Adjustment Trimmer Replacement Video and Audio Equipment Gain and Offset Adjustment Portable and Battery Operated Equipment

The ADN2807 provides the receiver functions of quantization,signal level detect, and clock and data recovery at rates of OC-3,OC-12, and 15/14 FEC. All SONET jitter requirements are met,including jitter transfer, jitter generation, and jitter tolerance.All specifications are quoted for –40°C to +85°C ambienttemperature, unless otherwise noted.The device is intended for WDM system applications and canbe used with either an external reference clock or an on-chiposcillator with external crystal. Both native rates and 15/14 ratedigital wrappers are supported by the ADN2807, without anychange of reference clock.This device, together with a PIN diode and a TIA preamplifier,can implement a highly integrated, low cost, low power, fiberoptic receiver.The receiver front end signal detect circuit indicates when theinput signal level has fallen below a user adjustable threshold.The signal detect circuit has hysteresis to prevent chatter at theoutput.The ADN2807 is available in a compact 7 mm × 7 mm 48-leadchip-scale package (LFCSP). Applications SONET OC-3/-12, SDH STM-1/-4 and, 15/14 FEC rates WDM transponders Regenerators/repeaters Test equipment Passive optical networks

The ADP3303 is a member of the ADP3300, ADP3301, andADP3309 family of precision low dropout anyCAP voltage regulators. The ADP3303 stands out from the conventional LDOs with a different architecture, an enhanced process, and adifferent package. Its patented design requires only a 0.47 μFoutput capacitor for stability. This device is insensitive to capacitor Equivalent Series Resistance (ESR) and is stable with any good quality capacitor, including ceramic types (MLCC) forspace restricted applications. The ADP3303 achievesexceptional accuracy of ±0.8% at room temperature and ±1.4%overall accuracy over temperature, line, and load regulations.The dropout voltage of the ADP3303 is only 180 mV (typical) at 200 mA.In addition to the architecture and process, the Analog Devices, Inc., proprietary thermally enhanced package (Thermal Coastline)can handle 1 W of power dissipation without external heatsink or large copper surface on the printed circuit board (PCB).This keeps PCB real estate to a minimum and makes theADP3303 very attractive for use in portable equipment.The ADP3303 operates with a wide input voltage range from 3.2 V to 12 V and delivers a load current in excess of 200 mA.It features an error flag that signals when the device is about to lose regulation or when the short circuit or thermal overloadprotection is activated. Other features include shutdown and optional noise reduction capabilities. The ADP3300, ADP3301,and ADP3309 anyCAP LDO family offers a wide range of output voltages and output current levels:ADP3300 (50 mA, SOT-23)ADP3301 (100 mA) ADP3302 (100 mA, Dual Output)Applications Cellular telephones Notebook, palmtop computers Battery powered systems Portable instruments Post regulator for switching supplies Bar code scanners

Low Cost, Low Power, True RMS-to-DC Converter Features: Converts an ac voltage waveform to a dc voltage and then converts to the true rms, average rectified, or absolute value 200 mV rms full-scale input range (larger inputs with input attenuator) High input impedance: 1012 Ω  Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: +2.8 V, −3.2 V to ±16.5 V Low power: 200 μA maximum supply current Buffered voltage output No external trims needed for specified accuracy Related device: the AD737 features a power-down control with standby current of only 25 μA; the dc output voltage is negative and the output impedance is 8 kΩ

4MSPS Dual Simultaneous Sampling, 16-BIT SAR ADC, Differential Input Features: 16-bit/14-bit ADC family Dual simultaneous sampling Fully differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 92.5 dB, VREF = 3.3 V external at AD7380 (16-bit) 85.4 dB, VREF = 3.3 V external at AD7381 (14-bit) 101 dB with ×16 OSR On-chip oversampling function Resolution boost function INL (maximum) 2.0 LSBs at 16-bit 1.0 LSB at 14-bit 2.5 V internal reference High speed serial interface −40°C to +125°C operation 16-lead LFCSP, 3 mm × 3 mm Wide common-mode range Alert function

Dual, Simultaneous Sampling, 14-Bit, 4 MSPS, SAR ADCs, Pseudo Differential Input Features: Dual 16-bit/14-bit ADC family Dual simultaneous sampling Pseudo differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 87.5 dB, VREF = 3.3 V external for 16-bit AD7383 83.5 dB, VREF = 3.3 V external for 14-bit AD7384 93.4 dB with RES = 1 and OSR = 8 On-chip oversampling function Resolution boost function INL error (maximum) 2.5 LSBs for 16-bit AD7383 1.0 LSB for 14-bit AD7384 2.5 V internal reference High speed serial interface 40C to +125C operation 16-lead LFCSP, 3 mm 3 mm Alert function

Dual, Simultaneous Sampling, 14-Bit, 4 MSPS, SAR ADCs, Pseudo Differential Input Features: Dual 16-bit/14-bit ADC family Dual simultaneous sampling Pseudo differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 87.5 dB, VREF = 3.3 V external for 16-bit AD7383 83.5 dB, VREF = 3.3 V external for 14-bit AD7384 93.4 dB with RES = 1 and OSR = 8 On-chip oversampling function Resolution boost function INL error (maximum) 2.5 LSBs for 16-bit AD7383 1.0 LSB for 14-bit AD7384 2.5 V internal reference High speed serial interface 40C to +125C operation 16-lead LFCSP, 3 mm 3 mm Alert function

4-Channel, 4 MSPS, 16-Bit Dual Simultaneous Sampling SAR ADC Features: 16-bit, 14-bit, or 12-bit dual simultaneous sampling SAR ADC Single-ended analog inputs 4-channel with 2:1 multiplexers Channel sequencer mode High throughput rate of up to 4 MSPS SNR (typical) 87.5 dB (AD7386), VREF = 3.3 V external 84 dB (AD7387), VREF = 3.3 V external 73.8 dB (AD7388) 93 dB with OSR = 8, VREF = 2.5 V internal (AD7386) On-chip oversampling functions INL (typical) ±1.5 LSB (AD7386) ±0.5 LSB (AD7387) ±0.2 LSB (AD7388) Resolution boost function 2.5 V internal reference at 10 ppm/°C (maximum) Alert function −40°C to +125°C temperature range 16-lead, 3 mm × 3 mm LFCSP

+3/+5 Volt Serial-Input Micropower 12-Bit DAC Features: Micropower - 100 µA Single Supply - 2.7 V to 5.5 V Operation Compact 1.75 mm Height SO-8 Package and 1.1 mm Height TSSOP-8 Package AD7390 - 12-Bit Resolution AD7391 - 10-Bit Resolution SPI and QSPI Serial Interface Compatible with Schmitt Trigger Inputs