Low Cost 270 MHz Differential Receiver Amplifier Features: High Speed AD8130: 270 MHz, 1090 V/µs @ G = +1 AD8129: 200 MHz, 1060 V/µs @ G = +10 High CMRR 94 dB min, dc to 100 kHz 80 dB min @ 2 MHz 70 dB @ 10 MHz Low noise AD8130: 12.5 nV/√Hz AD8129: 4.5 nV/√Hz High input impedance: 1 MΩ differential Input common-mode range ±10.5 V Low distortion, 1 V p-p @ 5 MHz: AD8130, -79 dBc worst harmonic @ 5 MHz AD8129, -74 dBc worst harmonic @ 5 MHz User-adjustable gain No external components for G = +1 Power supply range +4.5 V to ±12.6 V Power-down

Triple Differential Driver for Wideband Video Features:Triple high speed fully differential driver700 MHz, 3 dB, 2 V p-p bandwidth (AD8146/AD8148)600 MHz, 3 dB, 2 V p-p bandwidth (AD8147)200 MHz, 0.1 dB, 2 V p-p bandwidth3000 V/s slew rate Fixed gain (AD8146/AD8147: G = 2, AD8148: G = 4) Differential or single-ended input to differential output Can be used as differential-to-differential receiver Drives one or two 100 UTP cables Adjustable output common-mode voltage (AD8146) Internal common-mode feedback network Output balance error 50 dB @ 50 MHz On-chip, sync-on common-mode encoding (AD8147/AD8148) Output pull-down feature for line isolation Low power: 57 mA @ 5 V for 3 drivers (AD8146) Wide supply voltage range: +5 V to 5 V Available in a small 4 mm 4 mm LFCSP

High Voltage, Current Shunt Monitor Features: ±4000 V HBM ESD High common-mode voltage range −2 V to +65 V operating −3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead SOIC_N: −40°C to +125°C Excellent ac and dc performance 6 μV/°C typical offset drift −8 ppm/°C typical gain drift 120 dB typical CMRR at dc Qualified for Automotive Applications

Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

Single-Lead, Heart Rate Monitor Front End Features: Fully integrated single-lead ECG front end Low supply current: 170 μA (typical) Common-mode rejection ratio: 80 dB (dc to 60 Hz) Two or three electrode configurations High signal gain (G = 100) with dc blocking capabilities 2-pole adjustable high-pass filter Accepts up to ±300 mV of half cell potential Fast restore feature improves filter settling Uncommitted op amp 3-pole adjustable low-pass filter with adjustable gain Leads off detection: ac or dc options Integrated right leg drive (RLD) amplifier Single-supply operation: 2.0 V to 3.5 V Integrated reference buffer generates virtual ground Rail-to-rail output Internal RFI filter 8 kV HBM ESD rating Shutdown pin 20-lead 4 mm × 4 mm LFCSP package Qualified for automotive applications

Single-Supply, Low Power, Precision FET Input Quad Buffer Features: Low power 250 μA maximum supply current per amplifier FET input 2 pA maximum input bias current at 25°C Extremely high input impedance Low noise 13 nV/√Hz voltage noise at 1 kHz 0.4 μV p-p voltage noise (0.1 Hz to 10 Hz) 0.8 fA/√Hz current noise at 1 kHz High dc precision 3 μV/°C maximum offset drift (B grade) 3 MHz bandwidth Unique pinout No leakage from inputs to supply pins Provides guarding capability Rail-to-rail output Single-supply operation Input range extends to ground Wide supply range Single-supply: 3 V to 36 V Dual-supply: ±1.5 V to ±18 V  Available in a compact 10-lead MSOP

10 MHz, G = 1, 10, 100, 1000 iCMOS Programmable Gain Instrumentation Amplifier Features: Small package: 10-lead MSOP Programmable gains: 1, 10, 100, 1000 Digital or pin-programmable gain setting Wide supply: ±5 V to ±15 V Excellent dc performance High CMRR: 100 dB (minimum), G = 100 Low gain drift: 10 ppm/°C (maximum) Low offset drift: 1.2 µV/°C (maximum), G = 1000 See data sheet for additional features

Fast, Voltage-Out, DC to 440 MHz, 95 dB Logarithmic Amplifier Features: Multistage demodulating logarithmic amplifier Voltage output, rise time <15 ns High current capacity: 25 mA into grounded RL 95 dB dynamic range: –91 dBV to +4 dBV Single supply of 2.7 V min at 8 mA typ DC to 440 MHz operation, ±0.4 dB linearity Slope of +24 mV/dB, intercept of –108 dBV Highly stable scaling over temperature Fully differential dc-coupled signal path 100 ns power-up time, 1 mA sleep current

RF Vector Modulator 1.5 GHz TO 2.4 GHz Features: Cartesian amplitude and phase modulation 1.5 GHz to 2.4 GHz frequency range Continuous magnitude control of −4.5 dB to −34.5 dB Continuous phase control of 0° to 360° Output third-order intercept 17.5 dBm Output 1 dB compression point 8.5 dBm Output noise floor −150.5 dBm/Hz at full gain Adjustable modulation bandwidth up to 230 MHz Fast output power disable 4.75 V to 5.25 V single-supply voltage 

2 GHz Ultralow Distortion Differential RF/IF Amplifier Features: −3 dB bandwidth of 2.2 GHz (AV = +10 dB) Single resistor gain adjust: 3 dB ≤ AV ≤ 25 dB Single resistor and capacitor distortion adjust Input resistance: 3 kΩ, independent of gain (AV) Differential or single-ended input to differential output Low noise input stage: 2.7 nV/√Hz RTI at AV = 10 dB Low broadband distortion 10 MHz: −86 dBc HD2, −82 dBc HD3 70 MHz: −84 dBc HD2, −82 dBc HD3 190 MHz: −81 dBc HD2, −87 dBc HD3 OIP3 of 41 dBm at 150 MHz Slew rate: 8 V/ns Fast settling and overdrive recovery of <2 ns Single-supply operation: 3 V to 5.5 V Low power dissipation: 37 mA typical at 5 V Power-down capability: 5 mA at 5 V Fabricated using the high speed XFCB3 SiGe process