High Performance, Polyphase Energy, and Class S Power Quality Monitoring IC Features: 7 high performance, 24-bit Σ-Δ ADCs 101 dB SNR at 8 kSPS with PGA = 1 Wide input voltage range: ±1 V, 707 mV rms full scale at gain = 1 Differential inputs ±25 ppm/°C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10000:1 dynamic input range, Class 0.2 metrology with standard external components With the optional ADSW-PQ-CLS Power Quality Library, the complete IEC 61000-4-30 Class S power quality standard is implemented including: Power frequency 10 sec average Magnitude of the supply Dips and swells Interruptions Rapid voltage change Flicker Mains signaling voltage Underdeviation and overdeviation Voltage and current Magnitude Harmonics Interharmonics Unbalance THD Waveform recording Optional ADSW-PQ-CLS Power Quality Library compatible with ARM® Cortex microcontrollers VRMS one-cycle and IRMS one-cycle refreshed each cycle VRMS and IRMS filtered and updated every sample 10 cycle rms/12 cycle rms Period registers to calculate line frequency, one per phase Zero crossing and zero-crossing timeout Phase angle measurements Supports CTs Multipoint phase and gain compensations for CTs Rogowski coils with the addition of an external analog integrator Continuous resampled data available Waveform buffer Advanced metrology feature set Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour Total and fundamental IRMS and VRMS Power factor Supports active energy standards: IEC 62053-21 and IEC 62053-22, EN50470-3, OIML R46, and ANSI C12.20 Supports reactive energy standards: IEC 62053-23 and IEC 62053-24 High speed communication port: 20 MHz SPI Integrated temperature sensor with 12-bit successive approximation register (SAR) ADC ±3°C accuracy from −40°C to +85°C

High Performance, Polyphase Energy, and Class S Power Quality Monitoring IC Features: 7 high performance, 24-bit Σ-Δ ADCs 101 dB SNR at 8 kSPS with PGA = 1 Wide input voltage range: ±1 V, 707 mV rms full scale at gain = 1 Differential inputs ±25 ppm/°C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10000:1 dynamic input range, Class 0.2 metrology with standard external components With the optional ADSW-PQ-CLS Power Quality Library, the complete IEC 61000-4-30 Class S power quality standard is implemented including: Power frequency 10 sec average Magnitude of the supply Dips and swells Interruptions Rapid voltage change Flicker Mains signaling voltage Underdeviation and overdeviation Voltage and current Magnitude Harmonics Interharmonics Unbalance THD Waveform recording Optional ADSW-PQ-CLS Power Quality Library compatible with ARM® Cortex microcontrollers VRMS one-cycle and IRMS one-cycle refreshed each cycle VRMS and IRMS filtered and updated every sample 10 cycle rms/12 cycle rms Period registers to calculate line frequency, one per phase Zero crossing and zero-crossing timeout Phase angle measurements Supports CTs Multipoint phase and gain compensations for CTs Rogowski coils with the addition of an external analog integrator Continuous resampled data available Waveform buffer Advanced metrology feature set Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour Total and fundamental IRMS and VRMS Power factor Supports active energy standards: IEC 62053-21 and IEC 62053-22, EN50470-3, OIML R46, and ANSI C12.20 Supports reactive energy standards: IEC 62053-23 and IEC 62053-24 High speed communication port: 20 MHz SPI Integrated temperature sensor with 12-bit successive approximation register (SAR) ADC ±3°C accuracy from −40°C to +85°C

Phase Detector / PLL Frequency Synthesizer Features: 400 MHz bandwidth 2.7 to 3.3 V power supply Separate charge pump supply (VP) allows extended tuning voltage in 3 V systems Programmable charge pump currents 3-wire serial interface Analog and digital lock detect Hardware and software power-down mode 104  MHz phase detectorADF4002-EP supports defense and aerospace applications (AQEC standard) Download ADF4002-EP data sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/11607 DSCC Drawing Number

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

6.5 V, 1 A, Ultralow Noise, High PSRR, Fast Transient Response CMOS LDO Features: Input voltage range: 2.3 V to 6.5 V Maximum load current: 1 A Low noise: 5 μV rms independent of output voltage at 100 Hz to 100 kHz Fast transient response: 1.5 μs for 1 mA to 500 mA load step 60 dB PSRR at 100 kHz Low dropout voltage: 42 mV at 500 mA load, VOUT = 3 V Initial accuracy: −0.5% (minimum), +1% (maximum) Accuracy over line, load, and temperature: ±1.5% Quiescent current, IGND = 0.7 mA with no load Low shutdown current: 0.25 μA at VIN = 5 V Stable with small 4.7 μF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V to 5.0 V Adjustable output from 1.2 V to VIN − VDO Precision enable Adjustable soft start 8-lead, 3 mm × 3 mm LFCSP package Supported by ADIsimPower tool

Supervisory Circuit with Manual Reset, Active-Low Open-Drain and Active-High Push-Pull Reset Outputs Features: 27 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) 4 watchdog timeout options 6.3 ms, 102 ms, 1.6 sec, and 25.6 sec (typical) Manual reset input Multiple reset output options Low power consumption Specified over wide temperature range (−40°C to +125°C) Qualified for automotive applications 5-lead SOT-23 package

Ultralow Power Voltage Detector with Disable Input and Low Threshold Voltages Features: Ultralow power consumption with ICC = 92 nA (typical) Precision, low voltage monitoring Pretrimmed voltage monitoring threshold options 20 options from 0.5 V to 1.9 V ±1.3% threshold accuracy over full temperature range Output disable input 23 µs to 26 µs typical propagation delay Open-drain type output Power supply glitch immunity Available in a 1.46 mm × 0.96 mm WLCSP Operational temperature range: −40°C to +85°C

2 GHz to 18 GHz, Digitally Tunable, High-Pass and Low-Pass Filter Features: Digitally tunable, multioctave, high-pass and low-pass tuning Independent 3 dB frequency control for up to 4 GHz of bandwidth Optimal wideband rejection: 35 dB Single chip replacement for discrete filter banks Compact 9 mm × 9 mm, 56-terminal LGA packageENHANCED PRODUCT FEATURES Supports defense and aerospace applications (AQEC standard Military temperature range of −55°C to +105°C Controlled manufacturing baseline One assembly and test site One fabrication site Production change notification Qualification data available on request V62/21604

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) Features: 5.7 kV rms and 1.5 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS signal levels Quad-channel configuration Any data rate up to 2.5 Gbps switching with low jitter 10 Gbps total bandwidth across four channels 2.15 ns typical propagation delay Typical jitter: 0.82 ps rms random, 40 ps total peak Lower power 1.8 V supplies ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: 100 kV/μs typical Safety and regulatory approvals (28-lead SOIC_W_FP package) UL (pending): 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK (working voltage) Enable or disable refresh (low speed output correctness check) Operating temperature range: −40°C to +125°C 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance

5 kV RMS/3.75 kV RMS, Dual LVDS Gigabit Isolator (Second Channel Reversed) Features: 5 kV rms and 3.75 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS standard Multiple dual-channel configurations Any data rate up to 1.1 Gbps switching with low jitter 4 ns typical propagation delay 2.6 ps rms typical random jitter, rms 90 ps typical peak-to-peak total jitter at 1.1 Gbps 2.5 V or 3.3 V supplies −75 dBc power supply ripple rejection, phase spur level Glitch immunity ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: >25 kV/μs Passes EN 55022 Class B radiated emissions limits with 1.1 Gbps PRBS Safety and regulatory approvals (20-lead SOIC_W package) UL (pending): 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 424 VPEAK Fail-safe output high for open, short, and terminated input conditions (ADN4655/ADN4656) Operating temperature range: −40°C to +125°C 7.8 mm minimum creepage and clearance