1 MSPS, 14-Bit, Simultaneous Sampling SAR ADC with PGA and Four Comparators Features: Dual, simultaneous sampling, 14-bit, 2-channel ADC True differential analog inputs Programmable gain stage: ×1, ×2, ×3, ×4, ×6, ×8, ×12, ×16, ×24, ×32, ×48, ×64, ×96, ×128 Throughput rate per ADC 1 MSPS for AD7264 Analog input impedance: >1 GΩ Wide input bandwidth −3 dB bandwidth: 1.7 MHz at gain = 2 4 on-chip comparators SNR: 78 dB typical at gain = 2, 71 dB typical at gain = 32 Device offset calibration System gain calibration On-chip reference: 2.5 V −40°C to +105°C operation High speed serial interface Compatible with SPI, QSPI™, MICROWIRE™, and DSP 48-lead LFCSP and LQFP packages

High Current Output, Triple Video Amplifier Features: Drives 13 V Output Drives Unlimited Capacitive Load High Current Output Drive: 70 mA Excellent Video Specifications (RL = 150 Ω) Gain Flatness 0.1 dB to 10 MHz 0.06% Differential Gain Error 0.02° Differential Phase Error Power Operates on ±2.5 V to ±7.5 V Supply 10.0 mA/Amplifier Max Power Supply Current High Speed 250 MHz Unity Gain Bandwidth (3 dB) 1200 V/µs Slew Rate Fast Settling Time of 35 ns (0.1%) High Speed Disable Function Turn-Off Time 30 ns Easy to Use 200 mA Short Circuit Current Output Swing to 1 V of Rails

High Speed, Fast Settling Precision Operational Amplifier Features:FAST  Slew Rate: 50 V/µs Min Settling Time (0.01%): 1 µs Max Gain Bandwidth Product: 10 MHz Typ Excellent Radiation HardnessPRECISE Common Mode Rejection: 88 dB Min Open Loop Gain: 500 V/mV Min Offset Voltage: 750 µV Max Bias Current: 200 pA Max Available in Die Form

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

2.7 V to 5.5 V, 140 A, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages Features: Micropower: 140 µA @ 5 V, 115 µA @ 3 V Power-Down to 200 nA @ 5 V, 50 nA @ 3 V Guaranteed Monotonic by design Power-On-Reset to Zero Volts Three Power-Down Functions SYNC (active low) Interrupt Facility Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Buffer Amplifier with Rail-to-Rail Operation Temperature Range: -40°C to 105°C Three Power-Down Functions

Low Cost 10-Bit Monolithic D/A Converter Features: Complete Current Output Converted High Stability Buried Zener Reference Laser Trimmed to High Accuracy (1/4 LSB Max Error, AD561K, T) Trimmed Output Application Resistors for 0 V to +10 V, ±5 V Ranges Fast Settling - 250 ns to 1/2 LSB Guaranteed Monotonocity Over Full Operating Temperature Range TTL/DTL and CMOS Compatible (Positive True Logic) Single Chip Monolithic Construction Available in Chip Form MIL-STD-883-Compliant Versions Available

Dual, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference, I2C Interface Features: Low power, smallest pin-compatible, dual nanoDACs AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm × 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

Complete Quad, 16-Bit, High Accuracy, Serial Input, 5 V DAC Features: Programmable output range: ±4.096 V, ±4.201 V, or ±4.311 V ±1 LSB maximum INL error, ±1 LSB maximum DNL error Low noise: 70 nV/√Hz Settling time: 10 μs maximum Integrated reference buffers Programmable short-circuit protection Simultaneous updating via LDAC Asynchronous CLR to zero code Logic output control pins Temperature range: −40°C to +105°C iCMOS® process technology See data sheet for additional features

Ultralow Power, Active High Shutdown and an Active Low Receiver Enable Features: RS-232 Compatible  Operates with 3 V or 5 V Logic  Ultralow Power CMOS: 1.3 mA Operation  Low Power Shutdown: 0.2 µA  Suitable for Serial Port Mice 116 kbits/s Data Rate  1 µF Charge Pump Capacitors  Single +3 V to +3.6 V Power Supply  Two Receivers Active in Shutdown (ADM560) 

Microprocessor Supervisor with Backup Battery Switchover, Adjustable Reset and Watchdog Periods, Chip Enable Signals, 4.65V Threshold Voltage, Watchdog, Battery Backup and Low VCC Status O/Ps and 250mA Output Current Features: Low Power Consumption: Precision Voltage Monitor ±2% Tolerance on ADM800L/M Reset Time Delay—200 ms, or Adjustable 1 µA Standby Current Automatic Battery Backup Power Switching Fast Onboard Gating of Chip Enable Signals Also Available in TSSOP Package (ADM691A)