3-Axis, 200 g Digital MEMS Accelerometer Features: Low power: as low as 35 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) Power consumption scales automatically with bandwidth Embedded, 32-level FIFO buffer minimizes processor load Bandwidth of up to 1 kHz Bandwidth selectable via serial command Shock event detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- or 4-wire) and I2C digital interfaces Wide temperature range: −40°C to +85°C 10,000 g shock survival Pb free/RoHS compliant Small and thin: 3 mm × 5 mm × 1 mm LGA packageADXL375-EP supports defense and aerospace applications (AQEC standard)Download ADXL375-EP Data Sheet (pdf)Extended industrial temperature range: −55°C to +105°CControlled manufacturing baseline1 assembly/test site1 fabrication siteProduct change notificationQualification data available on requestV62/ 18612 DSCC Drawing Number

Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier Features: Low power: 1.1 mA/amp Low wideband noise 2.1 nV/√Hz 1.4 pA/√Hz Low 1/f noise 7 nV/√Hz @ 10 Hz 13 pA/√Hz @ 10 Hz Low distortion: −105 dBc @ 100 kHz, VO = 2 V p-p High speed 80 MHz, −3 dB bandwidth (G = +1) 12 V/μs slew rate 175 ns settling time to 0.1% Low offset voltage: 0.3 mV maximum Rail-to-rail output Power down Wide supply range: 2.7 V to 12 V

Quad 12-Bit Serial Voltage Output DAC Features: Guaranteed monotonic over temperature Excellent matching between DACs Unipolar or bipolar operation Buffered voltage outputs High speed serial digital interface Reset-to-zero scale or midscale Wide supply range, +5 V only to ±15 V Low power consumption (35 mW maximum) Available in 16-Lead PDIP, SOIC, and CERDIP packages

12V, 30mA Flash Memory Programming Supply Features: Regulated 12V ±5% Output Voltage No Inductors Supply Voltage Range: 4.75V to 5.5V Guaranteed 30mA Output Low Power: Icc = 500µA Icc in Shutdown: 0.5µA 8-Pin PDIP or SO-8 Package

High Efficiency Battery Charger/USB Power Manager Features: Switching Regulator Makes Optimal Use of Limited Power Available from USB Port to Charge Battery  and Power Application 180mΩ Internal Ideal Diode Plus Optional External Ideal Diode Controller Seamlessly Provides Low  Loss Power Path When Input Power is Limited or  Unavailable Full Featured Li-Ion/Polymer Battery Charger VBUS Operating Range: 4.25V to 5.5V (7V Absolute  Maximum—Transient) 1.2A Maximum Input Current Limit 1.5A Maximum Charge Current with Thermal Limiting Bat-Track Adaptive Output Control Slew Control Reduces Switching EMI Low Profile (0.75mm) 14-Lead 4mm × 3mm DFN Package

Micropower Low Noise Boost Converters with Output Disconnect Features: Low Quiescent Current 65µA in Active Mode 1µA in Shutdown Mode Switching Frequency is Non-Audible Over Entire Load Range Integrated Power NPN: 350mA Current Limit (LT3494A) 180mA Current Limit (LT3494) Integrated Schottky Diode Integrated Output Disconnect Integrated Output Dimming Wide Input Range: 2.3V to 16V Wide Output Range: Up to 40V Tiny 8-Lead 3mm × 2mm DFN Package

2.25MHz, 800mA Synchronous Step-Down Regulator in ThinSOT Features: High Efficiency: Up to 95% Low Output Ripple (<20mVP-P): Burst Mode® Operation: IQ = 16µA 2.5V to 5.5V Input Voltage Range 2.25MHz Constant Frequency Operation Synchronizable to External Clock No Schottky Diode Required Stable with Ceramic Capacitors Low Dropout Operation: 100% Duty Cycle 0.6V Reference Allows Low Output Voltages Shutdown Mode Draws < 1µA Supply Current ±2% Output Voltage Accuracy Current Mode Operation for Excellent Line and Load Transient Response Overtemperature Protected Low Profile (1mm) ThinSOT™ Package

Secondary-Side Synchronous Forward Controller Features: Secondary-Side Control for Fast Transient Response Self-Starting Architecture Eliminates Need for Separate Bias Regulator Proprietary Gate Drive Encoding Scheme Reduces System Complexity Current Mode Control Ensures Current Sharing PLL Fixed Frequency: 100kHz to 500kHz ±1% Output Voltage Accuracy OPTI-LOOP Compensation Available in a Narrow 16-Lead SSOP Package

500mA 1MHz Synchronous Step-Up DC/DC Converters in 2mm 2mm DFN Features: Delivers 3.3V at 100mA from a Single Alkaline/NiMH Cell or 3.3V at 200mA from Two Cells VIN Start-Up Voltage: 850mV 1.6V to 5.25V VOUT Range Up to 94% Efficiency Output Disconnect 1MHz Fixed Frequency Operation VIN > VOUT Operation Integrated Soft-Start Current Mode Control with Internal Compensation Automatic Burst Mode® Operation with 9μA Quiescent Current (LTC3526) Low Noise PWM Operation (LTC3526B) Internal Synchronous Rectifier Logic Controlled Shutdown (IQ < 1μA) Anti-Ringing Control Low Profile (2mm × 2mm × 0.75mm) DFN Package

16-Bit, 105Msps ADC Features: Sample Rate: 105Msps/80Msps 78.2dBFS Noise Floor 100dB SFDR SFDR >82dB at 250MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 900mW/725mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 25Msps: LTC2203 (16-Bit) Single-Ended Clock 10Msps: LTC2202 (16-Bit) Single-Ended Clock 48-Pin 7mm × 7mm QFN Package