16-Bit, Isolated, Sigma-Delta ADC Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.6 μV/°C maximum SNR: 86 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±320 mV ENOB: 14 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range −40°C to +125°C (16-lead SOIC_W) −40°C to +105°C (8-lead SOIC_IC) 20 V operation on VDD1 High CMTI: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (Pending) VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (Pending)

16-Bit, Isolated, Sigma-Delta Modulator Features:5 MHz to 21 MHz master clock input frequencyOffset drift vs. temperature: 0.25 V/C maximumSNR: 82 dB typical16 bits, no missing codesFull-scale analog input voltage range: 64 mVENOB: 13 bits typicalIDD1: 10 mA maximumOn-board digital isolatorOperating temperature range40C to +125C (16-lead SOIC_W)40C to +105C (8-lead SOIC_IC)High isolation common-mode transient immunity:150 kV/s minimum, VDD2 = 3.3 VWide-body SOICs16-lead SOIC_W8-lead SOIC_IC with increased creepageSafety and regulatory approvalsUL recognition5700 V rms for 1 minute per UL 1577CSA Component Acceptance Notice 5AVDE Certificate of ConformityDIN V VDE V 0884-10: VIORM = 1270 VPEAKDIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

16-Bit, Isolated, Sigma-Delta Modulator Features:5 MHz to 21 MHz master clock input frequencyOffset drift vs. temperature: 0.25 V/C maximumSNR: 82 dB typical16 bits, no missing codesFull-scale analog input voltage range: 64 mVENOB: 13 bits typicalIDD1: 10 mA maximumOn-board digital isolatorOperating temperature range40C to +125C (16-lead SOIC_W)40C to +105C (8-lead SOIC_IC)High isolation common-mode transient immunity:150 kV/s minimum, VDD2 = 3.3 VWide-body SOICs16-lead SOIC_W8-lead SOIC_IC with increased creepageSafety and regulatory approvalsUL recognition5700 V rms for 1 minute per UL 1577CSA Component Acceptance Notice 5AVDE Certificate of ConformityDIN V VDE V 0884-10: VIORM = 1270 VPEAKDIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

2 A, Low VIN, Low Noise, CMOS Linear Regulator Features: 2 A maximum output current Low input voltage supply range VIN = 1.10 V to 1.98 V, no external bias supply required Fixed output voltage range: VOUT_FIXED = 0.9 V to 1.5 V Adjustable output voltage range: VOUT_ADJ = 0.5 V to 1.5 V Ultralow noise: 2 μV rms, 100 Hz to 100 kHz Noise spectral density 4 nV/√Hz at 10 kHz 3 nV/√Hz at 100 kHz Low dropout voltage: 62 mV typical at 2 A load Operating supply current: 4.5 mA typical at no load ±1.5% fixed output voltage accuracy over line, load, and temperature Excellent power supply rejection ratio (PSRR) performance 62 dB typical at 10 kHz at 2 A load 46 dB typical at 100 kHz at 2 A load Excellent load/line transient response Soft start to reduce inrush current Optimized for small 10 μF ceramic capacitors Current-limit and thermal overload protection Power-good indicator Precision enable 16-lead, 3 mm × 3 mm LFCSP package AEC-Q100 qualified for automotive applications

Buck or Boost, PWM Controller for Battery Test Solutions Features: Input voltage range: 6 V to 60 V On-board 5 V low dropout regulator Selective buck or boost mode Excellent PWM linearity with high amplitude PWM sawtooth 4.0 V p-p FAULT input compatible with AD8450 COMP input compatible with AD8450 Adjustable frequency from 50 kHz to 300 kHz Synchronization output or input with adjustable phase shift Programmable maximum duty cycle See datasheet for additional features

Configurable, Dual 2 A/Single 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Configurable 3 A/1 A or 2 A/2 A dual output load combinations or 4 A combined single output High efficiency: up to 95% Input voltage VIN: 2.75 V to 5.5 V Selectable fixed output: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V or adjustable output voltage to 0.6 V minimum ±1.5% accuracy reference voltage Selectable fixed switching frequency: 300 kHz, 600 kHz, or 1.2 MHz Optimized gate slew rate for reduced EMI External synchronization or internal clock output Dual-phase, 180° shifted PWM channels Current mode for fast transient response, no current sense resistor required Pulse-skip under light load or forced PWM operation See data sheet for additonal features

20 V, 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Input voltage: 4.5 V to 20 V Integrated MOSFET: 44 m/11.6 m Reference voltage: 0.6 V ± 1% Continuous output current: 4 A 180° out of phase clock synchronizationSynchronizes to external clock: 200 kHz to 1.4 MHz Programmable switching frequency: 200 kHz to 1.4 MHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

20 V, 6 A, Synchronous, Step-Down DC-to-DC Regulator Features: Input voltage range: 4.5 V to 20 V Integrated MOSFET: 44 mΩ typical/11 mΩ typical Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable current-limit thresholdProgrammable switching frequency: 200 kHz to 1400 kHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

18 V, 12 A Step-Down Regulator with Programmable Current Limit Features: Input voltage: 4.5 V to 18 V Continuous output current: 12 A Integrated MOSFETs: 17 mΩ high-side/4.5 mΩ low-side 0.6 V ± 0.5% reference voltage Programmable switching frequency range: 200 kHz to 2200 kHz Enhanced transient response Programmable current limit with ±10% accuracy Precision enable and power good External compensation and soft start Start up into a precharged output Supported by the ADIsimPower design tool

Ultralow Power Energy Harvester PMU with MPPT and Charge Management Features: Boost regulator with maximum power point tracking (MPPT) with dynamic sensing or no sensing mode Hysteresis mode for best ultralight load efficiency Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA Input voltage operating range: 0.08 V to 3.3 V Fast cold start from 380 mV (typical) with charge pump Programmable shutdown point on MINOP pin based on the input open circuit voltage (OCV) 150 mA regulated output from 1.5 V to 3.6 V Battery terminal charging threshold (2.2 V to 5.2 V) to support charging storage elements Optional BACK_UP power path management Radio frequency (RF) transmission conducive to shutting down the switcher temporarily via microcontroller unit (MCU) communication