Want to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert.

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

The board is composed of three main blocks:

• SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;
• U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE 802.11 b/g/n Wi-Fi; and
• ECC508 Crypto Authentication.

The MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I/O interfaces, and low power Wi-Fi with a Cryptochip for secure communication using SHA-256 encryption. Plus, it offers ease of use Arduino Software (IDE) for code development and programming. All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form.

Its USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically.

Warning: Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.

Whether you’re looking to build your first Internet of Things project or simply make an existing device smarter, the MKR1000 Bundle provides everything you need to get started.

The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments.

The kit is based around the MKR1000 — a powerful board that combines the functionality of the Zero and the Wi-Fi Shield — and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

• 1 Arduino MKR1000 board, with header soldered
• 1 micro USB cable
• 1 400-point breadboard
• 70 solid-core jumper wires
• 1 9V battery snap
• 1 stranded jumper wire
• 6 phototransistors
• 3 potentiometers (10 kilohm)
• 10 pushbuttons
• 1 temperature sensor (TMP36)
• 1 tilt sensor
• 1 alphanumeric LCD (16 x 2 characters)
• 1 bright white
• 34 LEDs (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
• 1 small DC motor (6/9V)
• 1 small servo motor
• 1 piezo capsule (PKM17EPP-4001-B0)
• 1 H-bridge motor driver (L293D)
• 1 octocouplers (4NE5)
• 2 MOSFET transistors (IRF520)
• 5 capacitors (100uF)
• 5 diodes (1N4007)
• 3 transparent gels (R,G,B)
• 1 male pin strip (40 x 1)
• 20 resistors (220 ohm)
• 5 resistors (560 ohm)
• 5 resistors (1 kilohm)
• 5 resistors (4.7 kilohm)
• 20 resistors (10 kilohm)
• 5 resistors (1 megohm)
• 5 resistors (10 megohm)

Please note, don't connect 9V to the board, as it will be damaged. You can use the 9V Battery strip to supply an external component.

Arduino Opta Wifi Board, Cortex M4/M7 Rohs Compliant: Yes |Arduino AFX00002

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities.

Key Benefits:

• Easy and fast software development, starting from ready-to-use Arduino sketches, tutorials and libraries
• Support for standard IEC 61131-3 PLC languages
• Fieldbus integration via Modbus TCP (ethernet) and Modbus RTU (serial RS485)
• Seamless IoT connectivity (Ethernet/Wi-Fi/Bluetooth® Low Energy)
• Real-time remote monitoring via intuitive Arduino Cloud dashboards (or third-party services)
• Security at the hardware level thanks to onboard secure element and X.509 Standard compliance
• Secure OTA firmware updates and Cloud device management
• High-power relay switching (4 x 2.3 kW)
• Reliable by design, thanks to industrial certifications and Finder’s expertise in switching technology
• Easy to install, with DIN rail compatibility

Applications:

• Industrial IoT
• Building automation
• Electrical loads management
• Industrial automation

PORTENTA HAT CARRIER

The Portenta Hat Carrier is an innovative solution enabling multiple robotics, industrial, and building automation projects. Combined with the Portenta X8, H7, or C33 boards, it evolves into a powerful industrial platform, further complemented by its compatibility with Raspberry Pi Hats. The carrier grants easy access to an array of peripherals, such as CAN, Ethernet, microSD, USB, camera, and analog input and output ports. Its design is further enhanced with dedicated pins for efficient debugging and PWM fan connector.

Features:

• Add Raspberry Pi Hats to Portenta projects
• Quickly access CAN, USB, and Ethernet peripherals
• Leverage onboard MicroSD card to log data
• Simple debugging through the onboard JTAG pins
• Easily control actuators via 16x analog I/Os
• Develop industrial machine vision solutions leveraging the onboard camera connector
• A great prototyping tool for scalable Portenta applications

Applications:

• Building automation
  • Environmental monitoring
  • Smart building security
• Industrial automation
  • Motion controllers
  • Smart sorting systems
  • Audio quality test benches
• Prototyping
  • Frictionless Linux prototyping experiences
  • Prototyping with Raspberry Pi Hats