Whether you’re looking to build your first Internet of Things project or simply make an existing device smarter, the MKR1000 Bundle provides everything you need to get started.

The kit is based around the MKR1000 — a powerful board that combines the functionality of the Zero and the Wi-Fi Shield — and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

• 1 Arduino MKR1000 board, with header soldered
• 1 micro USB cable
• 1 400-point breadboard
• 70 solid-core jumper wires
• 1 9V battery snap
• 1 stranded jumper wire
• 6 phototransistors
• 3 potentiometers (10 kilohm)
• 10 pushbuttons
• 1 temperature sensor (TMP36)
• 1 tilt sensor
• 1 alphanumeric LCD (16 x 2 characters)
• 1 bright white
• 34 LEDs (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
• 1 small DC motor (6/9V)
• 1 small servo motor
• 1 piezo capsule (PKM17EPP-4001-B0)
• 1 H-bridge motor driver (L293D)
• 1 octocouplers (4NE5)
• 2 MOSFET transistors (IRF520)
• 5 capacitors (100uF)
• 5 diodes (1N4007)
• 3 transparent gels (R,G,B)
• 1 male pin strip (40 x 1)
• 20 resistors (220 ohm)
• 5 resistors (560 ohm)
• 5 resistors (1 kilohm)
• 5 resistors (4.7 kilohm)
• 20 resistors (10 kilohm)
• 5 resistors (1 megohm)
• 5 resistors (10 megohm)

Please note, don't connect 9V to the board, as it will be damaged. You can use the 9V Battery strip to supply an external component.

Arduino MKR GSM 1400 is a powerful board that combines the functionality of the Zero and global GSM connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

Arduino MKR GSM 1400 has been designed to offer a practical and cost effective solution for makers seeking to add global GSM connectivity to their projects with minimal previous experience in networking. It is based on the Atmel SAMD21 and a SARAU201 GSM module.

The design includes the ability to power the board using a LiPo battery or external power source rated 5V. Switching from one source to the other is done automatically. A good 32 bit computational power similar to the Zero board, the usual rich set of I/O interfaces, gobal GSM communication and the ease of use of the Arduino Software (IDE) for code development and programming. All these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form factor. The USB port can be used to supply power (5V) to the board. During cellular transmissions the peak current required by the board will exceed 500mA. This is in excess of what can sourced by a standard USB port, so it is MANDATORY to have a 1500 mAh or higher LiPo battery plugged all the time, the current provided by the USB port will be supplmented by the battery.  When powering the board using Vin, a 5V power supply that can supply atleast 2A is required.

Please note: This board does not ship with a SIM card.

Warning: Unlike most Arduino & Genuino boards, the MKR GSM 1400 runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.