2A, 3MHz Micropower Synchronous Boost Converter Features: Synchronous Rectification: Up to 97% Efficiency 2A Switch Current Rating Fixed Frequency Operation Up to 3MHz Wide Input Range: 0.5V to 5V Very Low Quiescent Current: 38µA (Burst Mode® Operation) 2.6V to 5V Adjustable Output Voltage 0.85V (Typ) Start-Up Voltage No External Schottky Diode Required (VOUT < 4.3V) Synchronizable Switching Frequency Burst Mode Enable Control Antiringing Control Reduces Switching Noise PGOOD Output OPTI-LOOP® Compensation Very Low Shutdown Current: <1µA Small 10-Pin MSOP Package

Standalone Li-Ion Switch Mode Battery Charger Features: Wide Input Supply Range: 4.7V to 22V – 4.2 Version 8.9V to 22V – 8.4 Version High Efficiency Current Mode PWM Controller with 500kHz Switching Frequency ±1% Charge Voltage Accuracy End-of-Charge Current Detection Output 3 Hour Charge Termination Timer Constant Switching Frequency for Minimum Noise ±5% Charge Current Accuracy Low 10µA Reverse Battery Drain Current Automatic Battery Recharge Automatic Shutdown When Input Supply is Removed Automatic Trickle Charging of Low Voltage Batteries Battery Temperature Sensing and Charge Qualification Stable with Ceramic Output Capacitor 8-Lead SO and 10-Lead DFN Packages

Standalone Li-Ion Switch Mode Battery Charger Features: Wide Input Supply Range: 4.7V to 22V – 4.2 Version 8.9V to 22V – 8.4 Version High Efficiency Current Mode PWM Controller with 500kHz Switching Frequency ±1% Charge Voltage Accuracy End-of-Charge Current Detection Output 3 Hour Charge Termination Timer Constant Switching Frequency for Minimum Noise ±5% Charge Current Accuracy Low 10µA Reverse Battery Drain Current Automatic Battery Recharge Automatic Shutdown When Input Supply is Removed Automatic Trickle Charging of Low Voltage Batteries Battery Temperature Sensing and Charge Qualification Stable with Ceramic Output Capacitor 8-Lead SO and 10-Lead DFN Packages

600MHz, Low Noise, High Precision Fully Differential Input/Output Amplier/Driver Features: Fully Differential Input and Output Low Noise: 1.5nV/√Hz RTI Very Low Distortion: LTC6404-1 (2VP-P , 10MHz): –91dBc LTC6404-2 (2VP-P , 10MHz): –96dBc LTC6404-4 (2VP-P , 10MHz): –101dBc Closed-Loop –3dB Bandwidth: 600MHz Slew Rate: 1200V/μs (LTC6404-4) Adjustable Output Common Mode Voltage Rail-to-Rail Output Swing Input Range Extends to Ground Large Output Current: 85mA (Typ) DC Voltage Offset < 2mV (Max) Low Power Shutdown Tiny 3mm × 3mm × 0.75mm 16-Pin QFN Package

2.7GHz, 5V, Low Noise, Rail-to-Rail Input Differential Amplifier/Driver Features: Low Noise: 1.6nV/√Hz RTI Low Power: 18mA at 5V Low Distortion (HD2/HD3): –82dBc/–65dBc at 50MHz, 2VP-P –97dBc/–91dBc at 25MHz, 2VP-P Rail-to-Rail Differential Input 4.5V to 5.25V Supply Voltage Range Fully Differential Input and Output Adjustable Output Common Mode Voltage 800MHz –3dB Bandwidth with AV = 1 Gain-Bandwidth Product: 2.7GHz Low Power Shutdown Available in 8-Lead MSOP and 16-Lead 3mm × 3mm × 0.75mm QFN Packages

1kHz - 68MHz Serial Port Programmable Oscillator Features: 1kHz to 68MHz Square Wave Output 0.5% (Typ) Initial Frequency Accuracy Frequency Error <1.1% Over All Settings 10ppm/°C Typical Frequency Drift Over Temperature 0.1% Resolution 1.7mA Typical Supply Current (f < 1MHz, VS = 2.7V) 2.7V to 5.5V Single Supply Operation Jitter <0.4% Typical 1kHz to 8MHz Easy to Use SPI (LTC6903) or I2C (LTC6904) Serial Interface Output Enable Pin –55°C to 125°C Operation MS8 Package

17MHz to 170MHz Resistor Set SOT-23 Oscillator Features: One External Resistor Sets the Frequency Fast Start-Up Time: 100µs Typical Frequency Range: 17MHz to 170MHz Frequency Error ±0.5% Typ 17MHz to 170MHz (TA = 0°C to 70°C, Over All Settings) ±20ppm/°C Temperature Stability Rise Time: 0.5ns, CL = 5pF Timing Jitter: 7.2ps RMS at 170MHz 50% ±2.5% Duty Cycle 6mA Typical Supply Current, fOSC = 100MHz CMOS Output Drives 500 Load (VS = 3V) Operates from a Single 2.7V to 5.5V Supply Low Profile (1mm) ThinSOT™ Package

Micropower, 40kHz to 4MHz Resistor Set Oscillator in SOT-23 Features: Supply Current: 36µA at 400kHz 1% Frequency Accuracy (from 0°C to 70°C) Frequency Range: 40kHz to 4MHz One Resistor Sets the Oscillator Frequency –40°C to 125°C Operating Temperature Range Start-Up Time Under 200µs at 4MHz First Cycle After Power-Up is Accurate 150 CMOS Output Driver Low Profile (1mm) SOT-23 (ThinSOTTM) Package

Dual Programmable Gain Amplifiers with Serial Digital Interface Features: 2 Channels with Independent Gain Control LTC6912-1: (0, 1, 2, 5, 10, 20, 50, and 100V/V) LTC6912-2: (0, 1, 2, 4, 8, 16, 32, and 64V/V) Offset Voltage = 2mV Max (–40°C to 85°C) Channel-to-Channel Gain Matching of 0.1dB Max 3-Wire SPITM Interface Extended Gain-Bandwidth at High Gains Wired-OR Outputs Possible (2:1 Analog MUX Function) Low Power Hardware Shutdown (GN-16 Only, 2µA Max at 2.7V) Rail-to-Rail Input Range Rail-to-Rail Output Swing Single or Dual Supply: 2.7V to 10.5V Total Input Noise: 12.6nV/√Hz Total System Dynamic Range to 115dB 16-Pin GN (SSOP) or 12-Pin DFN Package Options

Precision Zero Drift Current Sense Amplifier Features: Supply Range: 4V to 60V, 70V Maximum (LTC6102) 5V to 100V, 105V Maximum (LTC6102HV) ±10μV Input Offset Maximum ±50nV/°C Input Offset Drift Maximum Fast Response: 1μs Step Response Gain Configurable with Two Resistors Low Input Bias Current: 3nA Maximum PSRR 130dB Minimum Output Currents up to 1mA Operating Temperature Range: –40°C to 125°C Disable Mode (LTC6102-1 Only): 1μA Maximum Available in 8-Lead MSOP and 3mm × 3mm DFN Packages