The ADuCM350 is a configurable Impedance Converter and Potentiostat with current and voltage measurement capability for both Electrochemical sensors and Biosensors. It is a complete, coin cell powered, high precision, MCU integrated solution for portable device applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs.The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160 kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. It has 4 voltage measurement channels, up to 8 current measurement channels and an impedance measurement DFT engine. The ADuCM350 also includes an ARM Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors. The ADuCM350 is available in a 120-lead, 8 mm ? 8 mm CSP_BGA and operates from ?40?C to +85?C. To support extremely low dynamic and hibernate power management, the ADuCM350 provides a collection of power modes and features, such as dynamic and software controlled clock gating and power gating.The AFE is connected to the ARM Cortex-M3 via an advanced high performance bus (AHPB) slave interface on the advanced microcontroller bus architecture (AMBA) matrix, as well as direct memory access (DMA) and interrupt connections.APPLICATIONS Point-of-care diagnostics Body-worn devices for monitoring vital signs Amperometric, voltametric, and impedometric measurements

Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU Features: Analog I/O Multichannel, 12-bit, 1 MSPS ADC Up to 16 ADC channels Fully differential and single-ended modes 0 V to VREF analog input range12-bit voltage output DACs Up to 4 DAC outputs available On-chip voltage reference On-chip temperature sensor (±3°C) Voltage comparator Microcontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debug Clocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 44 MHz 41.78 MHz PLL with programmable divider See datasheet for additional features

Precision Analog Microcontroller, 12-Bit Analog Input/Output, ARM7TDMIMCU Features: Analog input/output Multiple channel, 12-bit, 1 MSPS ADC 2 differential pairs with input PGA General-purpose inputs (differential or single-ended) ADuC7120: 11 channels Fully differential and single-ended modes 0 V to VREF analog input voltage range (single-ended mode) 5 low noise IDACs 250 mA, 200 mA, 45 mA, 80 mA, 20 mA 12-bit voltage output DACs ADuC7120: 12 channels 4× 12-bit voltage output DACs On-chip voltage reference On-chip temperature sensor Microcontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debug Clocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 41.78 MHz 41.78 MHz PLL with programmable divider Memory 126 kB Flash/EE memory, 8 kB SRAM In-circuit download, JTAG-based debug Software triggered in-circuit reprogrammability On-chip peripherals UART, 2 × I2C and SPI serial I/O 32-pin GPIO port 4× general-purpose timers Wake-up timers and WDT Power supply monitor IDAC monitor Temperature monitor Vectored interrupt controller for FIQ and IRQ 8 priority levels for each interrupt type Interrupt on edge or level external pin inputs Power Specified for 3 V operation Normal mode: 11 mA at 5.22 MHz, 30 mA at 41.78 MHz Packages and temperature range 7 mm × 7 mm 108-ball CSP_BGA Fully specified for –40°C to +105°C operation Tools Low cost QuickStart development system Full third party support

Precision Analog Microcontroller, 14-Bit Analog I/O with MDIO Interface, Arm Cortex-M3 Features:Analog input/output Multichannel, 14-bit, 1 MSPS analog-to-digital converter (ADC) Up to 16 ADC input channels 8 x 12-bit VDACs with a range of 0 V to 2.5 V or AVDD 4 x 12-bit IDACs with a range of 0 mA to 150 mA Voltage comparatorMicrocontroller ARM Cortex-M3 processor, 32-bit RISC architectureClocking options 80 MHz PLL with programmable divider Trimmed on-chip oscillator (±3%)Memory 2 × 128 kB independent Flash/EE memories 10,000 cycle Flash/EE endurance 20-year Flash/EE retention 32 kB SRAMOn-chip peripherals MDIO slave up to 4 MHz 2 × I2C, 2 × SPI, UART Temperature range Fully specified for −40°C to +105°C ambient operationSee data sheet for additional features.

Precision Analog Microcontroller with Chemical Sensor Interface Features: Analog input/output 16-bit, 400 kSPS ADC Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers, PGA Voltage DACs Two dual output voltage DACs Output range: 0.2 V to 2.4 V (±2.2 V voltage potential to sensor) for 12-bit outputs Two bias potentiostat and TIA amplifiers   Ultralow power, 1 μA per amplifier One high speed 12-bit voltage DAC Output range to sensor: −607 mV to +607 mV High speed TIA for impedance measurements Programmable gain amplifier on output Amplifiers, accelerators, and references Two low power, low noise amplifiers Suitable for potentiostat bias in electrochemical sensing Two low power, low noise TIAs Suitable for measuring sensor current output in the ±0.00005 μA to ±3000 μA range Programmable load and gain resistors Analog hardware accelerators Digital waveform generator DFT and digital filters 2.5 V and 1.82 V on-chip, precision voltage references Internal Temperature Sensor, ±2°C accurate Impedance measurement range of <1 Ω to 10 MΩ, 0.016 Hz to 200,000 Hz Voltammetry scan rate up to 2000 steps per second Microcontroller 26 MHz ARM Cortex-M3 processor Serial wire port supports code download and debugging 128 kB flash/64 kB of SRAM Security and safety Hardware cyclic redundancy check (CRC) with programmable polynomial generator Read and write protection of user flash On-chip peripherals UART, I2C, and SPI serial input/output Up to 17 GPIO pins External interrupt option General-purpose, wake-up, and watchdog timers Power 2.8 V to 3.6 V supply and active measurement range Power supply monitor Active current consumption: 30 μA/MHz for digital section Hibernate with bias to external sensor: 8.5 μA Shutdown mode with no SRAM retention: 2 μA Package and temperature range 6 mm × 5 mm, 72-lead LGA package Fully specified for −40°C to +85°C ambient operation

Low Power, Precision Analog Microcontroller with Dual Sigma-Delta ADCs, ARM Cortex-M3 Features: Pin compatible with the ADuCM360/ADuCM361 Analog input/output Dual 24-bit ADCs Programmable ADC output rate (3.5 Hz to 3.906 kHz) Simultaneous 50 Hz/60 Hz noise rejection At 50 SPS continuous conversion mode At 16.67 SPS single conversion mode Flexible input mux for input channel selection to both ADCs Two 24-bit multichannel ADCs (ADC0 and ADC1) 6 differential or 12 single-ended input channels 4 internal channels for monitoring DAC, temperature sensor, IOVDD/4, and AVDD/4 (ADC1 only) Programmable gain (1 to 128) Gain of 1 with input buffer on/off supported RMS noise: 52 nV at 3.53 Hz, 200 nV at 50 Hz Programmable sensor excitation current sources On-chip precision voltage reference Two external reference options supported by both ADCs Single 12-bit voltage output DAC NPN mode for 4 mA to 20 mA loop applications Microcontroller ARM Cortex-M3 32-bit processor Serial wire download and debug Internal watch crystal for wake-up timer 16 MHz oscillator with 8-way programmable divider Memory Up to 256 kB Flash/EE memory, 24 kB SRAM In-circuit debug/download via serial wire and UART Power supply range: 1.8 V to 3.6 V (maximum) Power consumption, MCU active mode Core consumes 290 μA/MHz Overall system current consumption of 1.0 mA with core operating at 500 kHz (both ADCs on, input buffers off, PGA gain of 4, one SPI port on, and all timers on) Power consumption, power-down mode: 4 μA (wake-up timer active) On-chip peripherals 2× UART, I2C, and 2 × SPI serial I/O 16-bit PWM controller 19-pin multifunction GPIO port 2 general-purpose timers Wake-up timer/watchdog timer Multichannel DMA and interrupt controller DMA support for both SPI channels Package and temperature range 48-lead, 7 mm × 7 mm LFCSP Specified for −40°C to +125°C operation Development tools Low cost QuickStart Development System Third-party compiler and emulator tool support Multiple diagnostic functions that support SIL certification ADuCM362-EP Supports defense and aerospace applications (AQEC standard) Download ADuCM362-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/21606 DSCC Drawing Number

MICROCONTROLLERS (MCU) - 16/32 BIT - ARM ROHS COMPLIANT: YES

The ADuCM350 is a configurable Impedance Converter and Potentiostat with current and voltage measurement capability for both Electrochemical sensors and Biosensors. It is a complete, coin cell powered, high precision, MCU integrated solution for portable device applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs.The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160 kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. It has 4 voltage measurement channels, up to 8 current measurement channels and an impedance measurement DFT engine. The ADuCM350 also includes an ARM Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors. The ADuCM350 is available in a 120-lead, 8 mm ? 8 mm CSP_BGA and operates from ?40?C to +85?C. To support extremely low dynamic and hibernate power management, the ADuCM350 provides a collection of power modes and features, such as dynamic and software controlled clock gating and power gating.The AFE is connected to the ARM Cortex-M3 via an advanced high performance bus (AHPB) slave interface on the advanced microcontroller bus architecture (AMBA) matrix, as well as direct memory access (DMA) and interrupt connections.APPLICATIONS Point-of-care diagnostics Body-worn devices for monitoring vital signs Amperometric, voltametric, and impedometric measurements

The ADuCM350 is a configurable Impedance Converter and Potentiostat with current and voltage measurement capability for both Electrochemical sensors and Biosensors. It is a complete, coin cell powered, high precision, MCU integrated solution for portable device applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs.The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160 kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. It has 4 voltage measurement channels, up to 8 current measurement channels and an impedance measurement DFT engine. The ADuCM350 also includes an ARM Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors. The ADuCM350 is available in a 120-lead, 8 mm ? 8 mm CSP_BGA and operates from ?40?C to +85?C. To support extremely low dynamic and hibernate power management, the ADuCM350 provides a collection of power modes and features, such as dynamic and software controlled clock gating and power gating.The AFE is connected to the ARM Cortex-M3 via an advanced high performance bus (AHPB) slave interface on the advanced microcontroller bus architecture (AMBA) matrix, as well as direct memory access (DMA) and interrupt connections.APPLICATIONS Point-of-care diagnostics Body-worn devices for monitoring vital signs Amperometric, voltametric, and impedometric measurements

The ADuC7019?/?ADuC7020?/ ADuC7021 /?ADuC7022?/?ADuC7024?/?ADuC7025?/ ADuC7026?/?ADuC7027?/?ADuC7028?/?ADuC7029 are fully integrated,1 MSPS, 12-bit data acquisition systems incorporating highperformance multichannel ADCs, 16-bit/32-bit MCUs, andFlash?/EE memory on a single chip.The ADC consists of up to 12 single-ended inputs. An additionalfour inputs are available but are multiplexed with the four DACoutput pins. The four DAC outputs are available only on certainmodels (ADuC7020, ADuC7026, ADuC7028, and ADuC7029).However, in many cases where the DAC outputs are not present,these pins can still be used as additional ADC inputs, giving amaximum of 16 ADC input channels. The ADC can operate insingle-ended or differential input mode. The ADC input voltageis 0 V to VREF. A low drift band gap reference, temperature sensor,and voltage comparator complete the ADC peripheral set.Depending on the part model, up to four buffered voltageoutput DACs are available on-chip. The DAC output range isprogrammable to one of three voltage ranges.The devices operate from an on-chip oscillator and a PLLgenerating an internal high frequency clock of 41.78 MHz(UCLK). This clock is routed through a programmable clockdivider from which the MCU core clock operating frequencyis generated. The microcontroller core is an ARM7TDMI?,16-bit/32-bit RISC machine, which offers up to 41 MIPS peakperformance. Eight kilobytes of SRAM and 62 kilobytes ofnonvolatile Flash/EE memory are provided on-chip. TheARM7TDMI core views all memory and registers as a singlelinear array.On-chip factory firmware supports in-circuit serial downloadvia the UART or I2C serial interface port; nonintrusive emulationis also supported via the JTAG interface. These features areincorporated into a low cost QuickStart? development systemsupporting this MicroConverter? family.The parts operate from 2.7 V to 3.6 V and are specified over anindustrial temperature range of ?40?C to +125?C. Whenoperating at 41.78 MHz, the power dissipation is typically120 mW. The ADuC7019 / ADuC7020 / ADuC7021 /? ADuC7022 / ADuC7024 / ADuC7025 / ADuC7026 / ADuC7027 / ADuC7028 / ADuC7029 areavailable in a variety of memory models and packages (seeOrdering Guide).APPLICATIONS Industrial control and automation systems Smart sensors, precision instrumentation Base station systems, optical networking