Bq24166EVM-741 Evaluation Module

The LTM4600 is a complete 10A, DC/DC step down power supply. Included in the package are the switching controller, power FETs, inductor, and all support components. Operating over an input voltage range of 4.5V to 20V, the LTM4600 supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 10A continuous current (14A peak), needing no heat sinks or airflow to meet power specifications. Only bulk input and output capacitors are needed to finish the design.The low profile package (2.82mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. Fault protection features include integrated overvoltage and short circuit protection with a defeatable shutdown timer. A built-in soft-start timer is adjustable with a small capacitor.The LTM4600 is packaged in a compact (15mm ? 15mm) and low profile (2.82mm) over-molded Land Grid Array (LGA) package suitable for automated assembly by standard surface mount equipment. The LTM4600 is RoHS compliant.Applications Telecom and Networking Equipment Servers Industrial Equipment Point of Load Regulation

AFE5805 evaluation module

SAU100-USB

Conformal Coated powerPac

DC1746A-B: Demo Board for LTM2881 Complete Isolated RS485/RS422 µModule Transceiver + Power.

The LTC4365 protects applications where power supply input voltages may be too high, too low or even negative. It does this by controlling the gate voltages of a pair of external N-channel MOSFETs to ensure that the output stays within a safe operating range.The LTC4365 can withstand voltages between ?40V and 60V and has an operating range of 2.5V to 34V, while consuming only 125?A in normal operation.Two comparator inputs allow configuration of the overvoltage (OV) and undervoltage (UV) set points using an external resistive divider. A shutdown pin provides external control for enabling and disabling the MOSFETs as well as placing the device in a low current shutdown state. A fault output provides status of the gate pin pulling low. A fault is indicated when the part is in shutdown or the input voltage is outside the UV and OV set points.The LTC4365 has a 36ms turn-on delay that debounces live connections and blocks 50Hz to 60Hz AC power. For fast recovery after faults, the LTC4365-1 has a reduced 1ms turn-on delay.Applications Portable Instrumentation Industrial Automation Laptops Automotive Surge Protection

The LTM8005 is a 38VIN, 38VOUT boost ?Module (powermicromodule) LED driver designed to regulate current orvoltage and is ideal for driving LEDs. The fixed frequencyand current mode architecture result in stable operationover a wide range of supply and output voltages. Spreadspectrum frequency modulation (SSFM) can be activatedfor improved electromagnetic compatibility (EMC) performance.The ground-referred voltage FB pin serves as theinput for several LED protection features, and also allows theconverter to operate as a constant voltage source. The PWMinput provides LED dimming ratios of up to 3000:1, and theCTRL inputs provide additional analog dimming capability.The low profile package enables utilization of unusedspace on the bottom of PC boards. The LTM8005 is packagedin thermally enhanced, compact over-molded BallGrid Array (BGA) package suitable for automated assemblyby standard surface mount equipment. The LTM8005is RoHS compliant.APPLICATIONS High Power LED, High Voltage LED Accurate Current-Limited Voltage Regulators

The AD7688 is a 16-bit, 500 kSPS, charge redistribution successive-approximation Analog-to-Digital Converter which operates from a single 5V power supply, VDD. It contains a very low power high-speed 16-bit sampling ADC with no missing codes, an internal conversion clock and a versatile serial interface port. The part also contains a low noise, wide bandwidth, very short aperture delay track/hold circuit. On the CNV rising edge, it samples the voltage difference between IN+ and IN- pins. The voltages on these pins usually swing in opposite phase between 0 V to REF. The reference voltage REF is applied externally and can be set up to the supply voltage.Its power scales linearly with throughput.The SPI compatible serial interface also features the ability, using the SDI input, to ?Daisy chain? several ADCs on a single 3 wire bus and provides an optional Busy indicator. It is compatible with 1.8 V, 2.5 V, 3 V or 5 V logic using the separate supply VIO.The AD7688 is housed in a 10-lead ?SOIC or 10-lead QFN (Chip Scale package) with operationAPPLICATIONS Battery Powered Equipment Medical instruments Mobile communications Personal digital assistants Data Acquisition Instrumentation Medical Instruments Process Control

The TPS65983EVM is a complete reference design for USB Type-C and Power Delivery applications. It allows the user to develop various power profiles and alternate modes such as Thunderbolt and DisplayPort and debug existing USB Type-C and Power Delivery systems.

Features:

• Thunderbolt™ 3 Alternate Mode capable
• USB Type-C testing and verification
• USB Power Delivery testing and verification
• Application Emulation (Notebook, Dock, Dongle, Charger)
• Powered from single supply and bus-powered capable