The SSM6322 is an integrated, dual-channel audio amplifier solution that interfaces directly with audio DAC/CODEC, maximizing the fidelity of high fidelity audio signal chains. The highly efficient design of the SSM6322 delivers outstandingaudio performance while minimizing power dissipation for maximum battery life in portable applications.The SSM6322 features ?121 dB THD + N at 1 kHz, along with very low output noise from 20 Hz to 20 kHz. The low power operation, high peak output current, and high PSRR make the SSM6322 an ideal candidate for applications that require high fidelity audio, high dynamic range, precision, and low power. This highly integrated drive solution also reduces development time while reducing board space and minimizing external components.The SSM6322 is available in a 24-lead LFCSP package. The SSM6322 operates over the industrial temperature of ?40?C to +85?C.Applications High fidelity headphone driver Mobile phones Bluetooth speakers & headphones Gaming Notebooks and Tablets A/V receivers Professional audio equipment Audio test equipment Automobile infotainment system

The ADV7282 / ADV7282-M are versatile one-chip, multiformat video decoders. The ADV7282 / ADV7282-M automatically detects standard analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards in the form of composite, S-Video, and component video.The ADV7282 converts the analog video signals into a YCrCb 4:2:2 video data stream that is compatible with the 8-bit ITU-R BT.656 interface standard.The ADV7282-M converts the analog video signals into an 8-bit YCrCb 4:2:2 video data stream that is output over a mobile industry processor interface (MIPI?) CSI-2 interface.The analog video inputs of the ADV7282/ADV7282-M accept single-ended, pseudo differential, and fully differential signals. The ADV7282 / ADV7282-M contain a deinterlacer (I2P converter) and short to battery detection capability with two STB diagnostic pins. The ADV7282 provides four analog inputs. The ADV7282-M provides six analog inputs and three general-purpose outputs.The ADV7282 / ADV7282-M are programmed via a 2-wire, serial bidirectional port (I2C compatible) and is fabricated in a 1.8 V CMOS process. The LFCSP package option makes the decoder ideal for space-constrained portable applications.APPLICATIONS Smartphone/multimedia handsets Automotive infotainment DVRs for video security Media players

The ADV7611 is offered in automotive, professional (no HDCP), and industrial versions. The operating temperature range is ?40?C to +85?C.The UG-180 contains critical information that must be used in conjunction with the ADV7611.The ADV7611 is a high quality, single input HDMI?-capable receiver. It incorporates an HDMI-capable receiver that supports all mandatory 3D TV defined in HDMI 1.4a. The ADV7611 supports formats up to UXGA 60 Hz at 8 bit.It integrates a CEC controller that supports the capability discovery and control (CDC) feature.The ADV7611 has an audio output port for the audio data extracted from the HDMI stream. The HDMI receiver has an advanced mute controller that prevents audible extraneous noise in the audio output.The following audio formats are accessible: A stream from the I2S serializer (two audio channels) A stream from the S/PDIF serializer (two uncompressed channels or N compressed channels, for example, AC3) DST streamThe HDMI port has dedicated 5 V detect and Hot Plug? assert pins. The HDMI receiver also includes an integrated equalizer that ensures the robust operation of the interface with long cables.The ADV7611 contains one main component processor (CP), that processes the video signals from the HDMI receiver. It provides features such as contrast, brightness and saturation adjustments, STDI detection block, free run, and synchronization alignment controls.Fabricated in an advanced CMOS process, the ADV7611 is provided in a 10 mm ? 10 mm, 64-lead surface-mount LQFP_EP, RoHS-compliant package and is specified over the ?40?C to +85?C temperature range.APPLICATIONS Projectors Automotive Video conferencing HDTVs AVR, HTiB Soundbars Video switches

The ADV7612 is offered in automotive, professional (no HDCP), and industrial versions. The operating temperature range is?40?C to +85?C.The UG-216 contains critical information that must be used in conjunction with the ADV7612.The ADV7612 is a high quality Xpressview? fast switchingHDMI?-capable receiver. It incorporates a dual input HDMI-capable receiver that supports all mandatory 3D TV formats defined in HDMI 1.4a specification, HDTV formats up to 1080p 36-bit Deep Color, and display resolutions up to UXGA (1600 ? 1200 at 60 Hz).It integrates a CEC controller that supports the capabilitydiscovery and control (CDC) feature. The ADV7612 incorporates Xpressview fast switching on both input HDMI ports. Using Analog Devices, Inc., hardware-based HDCP engine that minimizes software overhead, Xpressview technology allows fast switching between both HDMI input ports in less than 1 second. Each HDMI port has dedicated 5 V detect and Hot Plug? assert pins. The HDMI receiver also includes an integrated program-mable equalizer that ensures robust operation of the interfacewith long cables.The ADV7612 offers a flexible audio output port for audio data extraction from the HDMI stream. HDMI audio formats, including SACD via DSD and HBR, are supported by ADV7612. The HDMI receiver has advanced audio functionality, such as a mute controller that prevents audible extraneous noise in the audio output.The ADV7612 contains one main component processor (CP)that processes the video signals from the HDMI receiver. It provides features such as contrast, brightness and saturation adjustments, STDI detection block, free run, and synchronization alignment controls.Fabricated in an advanced CMOS process, the ADV7612 is provided in a 14 mm ? 14 mm, 100-lead surface-mount LQFP_EP, RoHS-compliant package, and is specified over the ?40?C to +85?C temperature range.APPLICATIONS Projectors Automotive Video conferencing HDTVs AVR, HTiB Soundbars Video switches

The iMEMS® ADXL372 inertial sensor evaluation system is an easy-to-use evaluation tool targeting bench or desktop characterization of Analog Devices, Inc., inertial sensor products. The system consists of the inertial sensor evaluation board (ISEB), or main board, and a satellite board for any Analog Devices inertial sensor product. The ISEB connects directly to a PC via an USB cable, with the USB connection providing both communications and power to the board. The ISEB is connected to the satellite board through a ribbon cable. This cable allows the satellite to be easily manipulated for testing or separately placed into an environmental chamber for temperature or humidity testing. Separating the boards mitigates corruption of data due to the temperature and humidity effects of other components. The ISEB is an universal main board and is intended to be used with various satellites of Analog Devices inertial sensors, including analog and digital accelerometers, as well as gyroscopes. The different products are evaluated by means of separate GUIs that are customized for performance and characterization measurements relevant to the inertial sensor being evaluated. There are two kinds of mother board, one named –M and the other named –MLP. The difference between –M and –MLP is just the shunt resistor R13 and the gain resistor R17 which are used to detect the power consumption of the DUT (Device Under Test). EVAL-ADXL372-M used the –M mother board. As ADXL372 is pin-to-pin compatible with ADXL362, the ADXL362 satellite board can be reused for ADXL372. The EVAL-ADXL372Z-M system contains the ISEB and the EVAL-ADXL372Z-S satellite. Also included is an USB A to Mini-B cable to connect the ISEB to a PC and an 18-inch, 20-pin ribbon cable to connect the ISEB to the satellite.

The ADXRS290 is a high performance pitch and roll (dual-axis in-plane) angular rate sensor (gyroscope) designed for use in stabilization applications.The ADXRS290 provides an output full-scale range of ?100?/s with a sensitivity of 200 LSB/?/s. Its resonating disk sensor structure enables angular rate measurement about the axes normal to the sides of the package around an in-plane axis. Angular rate data is formatted as 16-bit twos complement and is accessible through a SPI digital interface. The ADXRS290 exhibits a low noise floor of 0.004?/s/?Hz and features programmable high-pass and low-pass filters.The ADXRS290 is available in a 4.5 mm ? 5.8 mm ? 1.2 mm, 18-terminal cavity laminate package.APPLICATIONS Optical image stabilization Platform stabilization Wearable products

The SSM2517 is a PDM digital input Class-D power amplifierthat offers higher performance than existing DAC plus Class-Dsolutions. The SSM2517 is ideal for power sensitive applications,such as mobile phones and portable media players, where systemnoise can corrupt the small analog signal sent to the amplifier.The SSM2517 combines an audio digital-to-analog converter(DAC), a power amplifier, and a PDM digital interface on a singlechip. The integrated DAC plus analog ?-? modulator architectureenables extremely low real-world power consumption fromdigital audio sources with excellent audio performance. Usingthe SSM2517, audio can be transmitted digitally to the audioamplifier, significantly reducing the effect of noise sources such asGSM interference or other digital signals on the transmitted audio.The SSM2517 is capable of delivering 2.4 W of continuous outputpower with <1% THD + N driving a 4 ? load from a 5.0 V supply.The SSM2517 features a high efficiency, low noise modulationscheme that requires no external LC output filters. The closed-loop,three-level modulator design retains the benefits of an all-digitalamplifier, yet enables very good PSRR and audio performance. Themodulation continues to provide high efficiency even at low outputpower and has an SNR of 96 dB. Spread-spectrum pulse densitymodulation is used to provide lower EMI-radiated emissionscompared with other Class-D architectures.The SSM2517 has a four-state gain and sample frequency selectionpin that can select two different gain settings, optimized for 3.6 Vand 5 V operation. This same pin also controls the internal digitalfiltering and clocking, which can be set for 64 ? fS or 128 ? fS inputsample rates to support both 3 MHz and 6 MHz PDM clock rates.The SSM2517 has a micropower shutdown mode with a typicalshutdown current of 1 ?A for both power supplies. Shutdown isenabled automatically by gating input clock and data signals. Astandby mode can be entered by applying a designated PDM stopcondition sequence. The device also includes pop-and-click suppressioncircuitry. This suppression circuitry minimizes voltageglitches at the output when entering or leaving the low powerstate, reducing audible noises on activation and deactivation.The SSM2517 is specified over the industrial temperature rangeof ?40?C to +85?C. It has built-in thermal shutdown and outputshort-circuit protection. It is available in a 9-ball, 1.5 mm ? 1.5 mmwafer level chip scale package (WLCSP).Applications Mobile handsets

The SSM2529 is a digital input, Class-D power amplifier that combinesa digital-to-analog converter (DAC), a low power audio specificdigital signal processor, and a sigma-delta (?-?) Class-D modulator.This unique architecture enables extremely low real-world powerconsumption from digital audio sources with excellent audioperformance. The SSM2529 is ideal for power sensitive applications,such as mobile phones and portable media players, where systemnoise can the corrupt small analog signals that are sent to ananalog input audio amplifier.Using the SSM2529, audio data can be transmitted to the amplifierover a standard digital audio serial interface, thereby significantlyreducing the effect of noise sources such as GSM interference orother digital signals on the transmitted audio. The closed-loopdigital input design retains the benefits of an all-digital amplifier, yetenables very good PSRR and audio performance. The three-level,?-? Class-D modulator is designed to provide the least amount ofEMI, the lowest quiescent power dissipation, and the highestaudio efficiency without sacrificing audio quality.The audio input is provided via a serial audio interface that can beprogrammed to accept all common audio formats, including I2S,TDM, and PDM. Control of the IC is provided via an I2C controlinterface. An alternative to I2C control is standalone operationmode, which allows several settings that are adjusted by off-chipexternal resistors. The SSM2529 can accept a variety of input MCLKfrequencies and can use BCLK as the clock source in someconfigurations. An integrated PLL can also provide the devicemaster clock.The integrated DSP includes soft digital volume control circuits; ade-emphasis, high-pass filter; a seven-band programmable equalizer;and a programmable digital dynamic range compressor. In addition,the part includes a feedforward speaker temperature predictionmodule to protect the loudspeaker.The SSM2529 supports single-supply mode, where DVDD isprovided by the on-chip LDO regulator, eliminating the need for anexternal digital core supply.The digital interface is very flexible and convenient. It can offer abetter system solution for other products whose sole audio sourceis digital, such as wireless speakers, laptop PCs, portable digitaltelevisions, and navigation systems.The SSM2529 is specified over the industrial temperature range of?40?C to +85?C. It has built-in thermal shutdown and output shortcircuitprotection. It is available in a 16-ball, 1.92 mm ? 1.94 mmwafer level chip scale package (WLCSP).Applications Mobile phones Portable media players Laptop PCs Wireless speakers Portable gaming Navigation systems

The SSM2537 is a PDM digital input Class D power amplifier that offers higher performance than existing DAC plus Class D solutions. The SSM2537 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones and portable media players.The SSM2537 combines an audio digital-to-analog converter (DAC), a power amplifier, and a PDM digital interface on a single chip. The integrated DAC plus analog ?-? modulator architecture enables extremely low real-world power consumption from digital audio sources with excellent audio performance. Using the SSM2537, audio can be transmitted digitally to the audio amplifier, significantly reducing the effect of noise sources such as GSM interference or other digital signals on the transmitted audio. The SSM2537 is capable of delivering 2.5 W of continuous output power with <1% THD + N driving a 4 ? load from a 5.0 V supply.The SSM2537 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The closed-loop, three-level modulator design retains the benefits of an all-digital amplifier, yet enables very good PSRR and audio performance. The modulation continues to provide high efficiency even at low output power and has an SNR of 103 dB PDM input. Spread-spectrum pulse density modulation is used to provide lower EMI-radiated emissions compared with other Class D architectures.The SSM2537 has a four-state gain and sample frequency selection pin that can select two different gain settings, optimized for 3.6 V and 5 V operation. This same pin also controls the internal digital filtering and clocking, which can be set for 64 ? fS or 128 ? fS input sample rates to support both 3 MHz and 6 MHz PDM clock rates.The SSM2537 has a micropower shutdown mode with a typical shutdown current of 1 ?A for both power supplies. Shutdown is enabled automatically by gating input clock and data signals. A standby mode can be entered by applying a designated PDM stop condition sequence. The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output when entering or leaving the low power state, reducing audible noises on activation and deactivation.The SSM2537 is specified over the industrial temperature range of ?40?C to +85?C. It has built-in thermal shutdown and output short-circuit protection. It is available in a 9-ball, 1.3 mm ? 1.3 mm wafer level chip scale package (WLCSP).Applications Mobile handsets

The SSM3302 is a fully integrated, high efficiency, stereo Class-D audio amplifier. The application circuit requires minimal externalcomponents and operates from a single 7 V to 18 V supply. The device is capable of delivering 2 ? 10 W of continuous output power into a 4 ? load (or 2 ? 8 W into 8 ?) with 98 dB. Spread spectrum pulse density modulation (PDM) is used toprovide lower EMI radiated emissions compared with other Class-D architectures. The SSM3302 includes an optional modulation select pin (ultralow EMI emission mode) that significantly reduces the radiated emissions at the Class-D outputs, particularly above 100 MHz. The SSM3302 can pass FCC Class-B emissions testing with an unshielded 20 inch cable using common-mode choke-based filtering.The fully differential input of the SSM3302 provides excellent rejection of common-mode noise on the input. The device also includes a highly flexible gain select pin that only requires one series resistor to choose a gain between 9 dB and 24 dB, with no change to the input impedance. The benefit of this is to improve gain matching between multiple SSM3302 devices within a single application compared with using external resistors to set gain.The SSM3302 includes an integrated voltage regulator thatgenerates a 5 V rail.The SSM3302 has a micropower shutdown mode with a typical shutdown current of 10 ?A. Shutdown is enabled by applying a logic low to the SD pin. The device also includes pop-and-click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off, reducing audible noise during activation and deactivation.Other included features to simplify system level integration of the SSM3302 are input low-pass filtering to suppress out-ofband DAC noise interference to the pulse density modulator, fixed input impedance to simplify component selection across multiple platform production builds, and a thermal warning indicator pin.The SSM3302 is specified over the commercial temperaturerange (?40?C to +85?C). It has built-in thermal shutdown andoutput short-circuit protection. It is available in a halide-free,40-lead, 6 mm ? 6 mm lead frame chip scale package (LFCSP).APPLICATIONS Mobile computing Flat panel televisions Media docking stations Portable electronics Sound bars