The ADP165/ADP166 are very low quiescent current, low dropout, linear regulator that operate from 2.2 V to 5.5 V and provides up to 150 mA of output current. The low 120 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range.The ADP165/ADP166 are specifically designed for stable operation with a tiny 1 ?F ? 30% ceramic input and output capacitors to meet the requirements of high performance, space-constrained applications.The ADP165/ADP166 are available in seven fixed output voltage options, ranging from 1.2 V to 3.3 V, and an adjustable output option. The ADP165 also include a switched resistor to discharge the output automatically when the LDO is disabled. The ADP166 is identical to the ADP165, but does not include the output discharge function.Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. The ADP165/ADP166 are available in a tiny 5-lead TSOT, a 6-lead LFCSP and a 4-ball, 0.5 mm pitch WLCSP package for the smallest footprint solution to meet a variety of portable power applications.Applications Portable and battery-powered equipment Post dc-to-dc regulation Portable medical devices Wireless sensor network (WSN) devices

The ADP165/ADP166 are very low quiescent current, low dropout, linear regulator that operate from 2.2 V to 5.5 V and provides up to 150 mA of output current. The low 120 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range.The ADP165/ADP166 are specifically designed for stable operation with a tiny 1 ?F ? 30% ceramic input and output capacitors to meet the requirements of high performance, space-constrained applications.The ADP165/ADP166 are available in seven fixed output voltage options, ranging from 1.2 V to 3.3 V, and an adjustable output option. The ADP165 also include a switched resistor to discharge the output automatically when the LDO is disabled. The ADP166 is identical to the ADP165, but does not include the output discharge function.Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. The ADP165/ADP166 are available in a tiny 5-lead TSOT, a 6-lead LFCSP and a 4-ball, 0.5 mm pitch WLCSP package for the smallest footprint solution to meet a variety of portable power applications.Applications Portable and battery-powered equipment Post dc-to-dc regulation Portable medical devices Wireless sensor network (WSN) devices

The ADP1660 is a very compact, highly efficient, dual white LEDflash driver for high-resolution camera phones that improvespicture and video quality in low light environments. The deviceintegrates a programmable 1.5 MHz or 3.0 MHz synchronousinductive boost converter, an I2C-compatible interface, and two 750 mA current sources. The high switching frequency enablesthe use of a tiny, 1 mm high, low cost, 1 ?H power inductor,and the parallel current sources permit LED cathode groundingfor thermally enhanced, low EMI, and compact layouts.The LED driver maximizes efficiency over the entire battery voltage range to maximize the input-power-to-LED-power conversion and minimize battery current draw during flash events.The LED driver maximizes efficiency over the entire batteryvoltage range to maximize the input-power-to-LED-powerconversion and minimize battery current draw during flashevents. A programmable DC battery current limit safely maximizesLED current for all LED VF and battery voltage conditions.A TxMASK input permits the flash LED currents and batterycurrent to reduce quickly during a power amplifier current burst.The I2C-compatible interface enables the programmability oftimers, currents, and status bit readback for operationmonitoring and safety control.ADP1660 comes in a compact 12-ball, 0.5 mm pitch packageand operates within specification over the full ?40?C to +125?Cjunction temperature range.APPLICATIONS Camera-enabled cellular phones and smart phones Digital still cameras, camcorders, and PDAs

The ADP165?/ ADP166 are very low quiescent current, low dropout, linear regulator that operate from 2.2 V to 5.5 V and provides up to 150 mA of output current. The low 120 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range.The ADP165 / ADP166 are specifically designed for stable operation with a tiny 1 ?F ? 30% ceramic input and output capacitors to meet the requirements of high performance, space-constrained applications.The ADP165 / ADP166 are available in seven fixed output voltage options, ranging from 1.2 V to 3.3 V, and an adjustable output option. The ADP165 also include a switched resistor to discharge the output automatically when the LDO is disabled. The ADP166 is identical to the ADP165, but does not include the output discharge function.Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. The ADP165 / ADP166 are available in a tiny 5-lead TSOT, a 6-lead LFCSP and a 4-ball, 0.5 mm pitch WLCSP package for the smallest footprint solution to meet a variety of portable power applications.APPLICATIONS Portable and battery-powered equipment Post dc-to-dc regulation Portable medical devices Wireless sensor network (WSN) devices

The ADP1715 / ADP1716?are low dropout, CMOS linear regulators that operate from 2.5 V to 5.5 V and provide up to 500 mA of output current. Using an advanced proprietary architecture, they provide high power supply rejection and achieve excellent line and load transient response with just a small 2.2 ?F ceramic output capacitor.Three versions of this part are available, one with fixed output voltage options and variable soft start (ADP1715), one with adjustable output voltage and fixed soft start (ADP1715 Adjustable), and one with voltage tracking in fixed output voltage options (ADP1716). The fixed output voltage options are internally set to one of sixteen values between 0.75 V and 3.3 V; the adjustable output voltage can be set to any value between 0.8 V and 5.0 V by an external voltage divider connected from OUT to ADJ. The variable soft start uses an external capacitor at SS to control the output voltage ramp. Tracking limits the output voltage to the at-or-below voltage at the TRK pin.The ADP1715 / ADP1716 are available in 8-lead thermally enhanced MSOP packages, making them not only a very compact solution but also providing excellent thermal performance for applications requiring up to 500 mA of output current in a small, low profile footprint.APPLICATIONS Notebook computers Memory components Telecommunications equipment Network Equipment DSP/FPGA/?P supplies Instrumentation equipment/data acquisition systems

The ADP1762 is a low noise, low dropout (LDO) linear regulator. It is designed to operate from a single input supply with an input voltage as low as 1.10 V, without the requirement of an external bias supply, to increase efficiency and provide up to 2 A of output current.The low 62 mV typical dropout voltage at a 2 A load allows the ADP1762 to operate with a small headroom while maintaining regulation and providing better efficiency.The ADP1762 is optimized for stable operation with small 10 ?F ceramic output capacitors. The ADP1762 delivers optimal transient performance with minimal board area.The ADP1762 is available in fixed output voltages ranging from 0.9 V to 1.5 V. The output of the adjustable output model can be set from 0.5 V to 1.5 V through an external resistor connected between VADJ and ground.The ADP1762 has an externally programmable soft start time by connecting a capacitor to the SS pin. Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. The ADP1762 is available in a small 16-lead LFCSP package for the smallest footprint solution to meet a variety of applications.APPLICATIONS Regulation to noise sensitive applications such as radio frequency (RF) transceivers, analog-to-digital converter (ADC) and digital-to-analog converter (DAC) circuits, phase-locked loops (PLLs), voltage controlled oscillators (VCOs) and clocking integrated circuits Field-programmable gate array (FPGA) and digital signal processor (DSP) supplies Medical and healthcare Industrial and instrumentation?

The ADP1763 is a low noise, low dropout (LDO) linear regulator. Itis designed to operate from a single input supply with an inputvoltage as low as 1.10 V without the requirement of an external biassupply to increase efficiency and provide up to 3 A of output current.The low 95 mV typical dropout voltage at a 3 A load allows theADP1763 to operate with a small headroom while maintainingregulation and providing better efficiency.The ADP1763 is optimized for stable operation with small 10 ?Fceramic output capacitors. The ADP1763 delivers optimaltransient performance with minimal board area.The ADP1763 is available in fixed output voltages ranging from0.9 V to 1.5 V. The output of the adjustable output model can beset from 0.5 V to 1.5 V through an external resistor connectedbetween VADJ and ground.The ADP1763 has an externally programmable soft start time byconnecting a capacitor to the SS pin. Short-circuit and thermaloverload protection circuits prevent damage in adverse conditions.The ADP1763 is available in a small 16-lead LFCSP package for thesmallest footprint solution to meet a variety of applications.APPLICATIONS Regulation to noise sensitive applications such as RF transceivers, analog-to-digital converter (ADC) and digital-to-analog converter (DAC) circuits, phase-locked loops (PLLs), voltage controlled oscillators (VCOs) and clocking integrated circuits Field-programmable gate array (FPGA) and digital signal processor (DSP) supplies Medical and healthcare Industrial and instrumentation Automotive

The ADP1874 / ADP1875?are versatile current mode, synchronous step-down controllers. They provide superior transient response, optimal stability, and current-limit protection by using a constant on-time, pseudo fixed frequency with a programmable current limit, current control scheme. In addition, these devices offer optimum performance at low duty cycles by using a valley, current mode control architecture. This allows the ADP1874 / ADP1875 to drive all N-channel power stages to regulate output voltages to as low as 0.6 V.The ADP1875 is the power saving mode (PSM) version of the device and is capable of pulse skipping to maintain output regulation while achieving improved system efficiency at light loads (see the ADP1875 Power Saving Mode (PSM) section for more information).Available in three frequency options (300 kHz, 600 kHz, and 1.0 MHz, plus the PSM option), the ADP1874 / ADP1875 are well suited for a wide range of applications that require a single-input power supply range from 2.95 V to 20 V. Low voltage biasing is supplied via a 5 V internal low dropout regulator (LDO).In addition, soft start programmability is included to limit input inrush current from the input supply during startup and to provide reverse current protection during precharged output conditions. The low-side current sense, current gain scheme, and integration of a boost diode, along with the PSM/forced pulsewidth modulation (PWM) option, reduce the external part count and improve efficiency.The ADP1874 / ADP1875 operate over the ?40?C to +125?C junction temperature range and are available in a 16-lead QSOP package.APPLICATIONS Telecom and networking systems Mid- to high-end servers Set-top boxes DSP core power supplies

The ADP190 is a high-side load switch designed for operationfrom 1.2 V to 3.6 V. This load switch provides power domainisolation for extended power battery life. The device contains alow on-resistance P-channel MOSFET that supports more than500 mA of continuous current and minimizes power loss. Thelow 2 ?A (maximum) of ground current and ultralow shutdowncurrent make the ADP190 ideal for battery-operated portableequipment. The built-in level shifter for enable logic makes theADP190 compatible with modern processors and GPIOcontrollers.Beyond operating performance, the ADP190 occupies minimalprinted circuit board (PCB) space with an area less than 0.64 mm2and a height of 0.60 mm. It is available in an ultrasmall 0.8 mm ?0.8 mm, 4-ball, 0.4 mm pitch WLCSP.ApplicationsMobile phonesDigital cameras and audio devicesPortable and battery-powered equipment

The ADP198 is a high-side load switch designed for operationbetween 1.65 V to 6.5 V that is protected against reverse currentflow from output to input. A load switch provides power domainisolation thereby helping to keep subsystems isolated andpowered independently, and enabling reduced powerconsumption. The ADP198 contains a low on-resistance PchannelMOSFET that supports over 1 Amp of continuous loadcurrent. The low 2.5?A quiescent current and ultra-lowshutdown current make the ADP198 ideal for battery-operatedportable equipment. The built-in level shifter for enable logicmakes the ADP198 compatible with modern processors andGPIO controllers. The LFCSP version also allows the user toprogram the start up time which control the inrush current atturn on.The ADP198 is available in an ultrasmall 1 mm ? 1 mm, 4-ball,0.5 mm pitch WLCSP. An 8-Lead 2 mm x 2 mm x 0.55 mm, 0.5mm pitch LFCSP is also available.APPLICATIONS Mobile phones Digital cameras and audio devices Portable and battery-powered equipment