CMOS 12-Bit Buffered Multiplying DAC With Onboard Data Latches Features: 12-Bit Resolution Low Gain TC: 2ppm/°C typ Fast TTL Compatible Data Latches Small 20-Lead 0.3" DIP and 20-Terminal Surface Mount Packages Single +5 V to +15 V Supply Latch Free (Schottky Protection Diode not Required) Low Cost Ideal for Battery Operated Equipment

Dual 12-Bit CMOS DAC with Parallel Load Input Structure Features: Two 12-bit DACs in One Package DAC Ladder Resistance Matching: 0.5% Space Saving Skinny DIP and Suface Mount Packages 4-Quadrant Multiplication Low Gain Error (1 LSB max Over Temperature) Fast Interface Timing

LC2MOS Complete, High Speed 12-Bit ADC Features:Improved AD7572Faster Conversion Time- AD7572AXX03: 3 s- AD7572AXX10: 10 s5 V and -12 V or -15 V Power Supply OperationBetter Offset and Gain Error Specifications Extended Plastic Temperature Range (-40C to +85C) Low Power: 100 mW Small 24-Pin, 0.3' Wide DIP and SOIC DIP Packages

LC2MOS Complete, High Speed 12-Bit ADC Features:12-Bit Resolution and AccuracyFast Conversion Time- AD7572XX06: 5 µs- AD7572XX12: 12.5 µsComplete with On-Chip ReferenceFast Bus Access Time: 90 nsLow Power: 135 mWSmall, 0.3', 24-Pin Package and28-Terminal Surface Mount Packages

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

High Speed, 4-Channel, 8-Bit CMOS ADC Features: 4 or 8 Analog Input Channels Built-In Track-and-Hold Function 10 kHz Signal Handling on Each Channel Fast Microprocessor Interface Single 5 V Supply Low Power: 50 mW Fast Conversion Rate: 2.5 µs/Channel Tight Error Specification: 1/2 LSB

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range: 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 V p-p, VDD = 3 V ± 10% 0 V to 2.5 V p-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.