The ADA4807-1/ADA4807-2 are low power, low noise, rail-to-rail voltage feedback amplifiers with exceptionally high performance. They are designed to have the lowest input noise (3.1 nV/√Hz and 0.7 pA/√Hz) among high speed, rail-to-rail amplifiers in the industry while operating on only 1 mA or less of quiescent supply current, making them ideal for a wide range of applications from battery-powered, portable instrumentation to high speed systems where component density requires lower power dissipation. The ADA4807 operate over a wide range of supply voltages from ±1.5 V to ±5 V, as well as from 3 V to 10 V single supplies, and include a disable feature that allows reduction of the typical quiescent supply current to 2.4 μA or less when asserted.For systems with high dynamic range signals, the output voltage swings to within 50 mV of each rail, maximizing the output cdynamic range, and the full, rail-to-rail input stage permits input operation up to and beyond the supply rails.The ADA4807 feature high speed performance of 180 MHz small signal −3 dB bandwidth, a 225 V/μs slew rate, and a settling time of 47 ns to 0.1% (4 V step) with a low input offset voltage of ±20 μV and 0.7 μV/°C drift. For ±5 V supplies, the HD2 is −112 dBc and HD3 is –115 dBc for a 2 V p-p, 100 kHz output signal driving a 1 kΩ load. The low distortion and fast settling time make these amplifiers ideal for driving high speed single-supply precision ADCs with up to 18-bit resolution. The ADA4807 deliver this excellent performance while consuming 1 mA or less of quiescent current.The ADA4807-1 (single) is available in space-saving 6-lead SC70 and 6-lead SOT-23 packages. The ADA4807-2 (dual) is available in 10-lead LFCSP and 8-lead MSOP packages. The ADA4807 operate over the −40°C to +125°C industrial temperature range.Applications High speed, battery operated systems High component density systems High resolution analog-to-digital converter (ADC) drivers Portable test instruments Active filters

Differential Amplifiers minSO G=15dB LO DISTORT'N 1.2GHz DiffAmp

Differential Amplifiers inSO G=20dB LO DISTORT'N 1.2GHz DiffAmp

Hot Swap Voltage Controllers ON Pin + Latched Off I.C.

Low-Side Gate Driver IC Inverting 8-MSOP

Instrumentation Amplifier 1 Circuit 8-MSOP

Precision Amplifiers DUAL High Performance ZCO Op Amp

Supervisory Circuits Quad Voltage Monitor & Sequencer

Ultralow Noise XFET 2.048V Voltage Reference w/Current Sink and Source Capability Features: Low noise (0.1 Hz to 10.0 Hz): 3.5 μV p-p @ 2.500 V output No external capacitor required Low temperature coefficient A Grade: 10 ppm/°C maximum B Grade: 3 ppm/°C maximum Load regulation: 15 ppm/mA Line regulation: 20 ppm/V Wide operating range ADR430: 4.1 V to 18 V High output source and sink current: 30 mA and −20 mA Wide temperature range: −40°C to +125°C

30 V, Micropower, Overvoltage Protection, Rail-to-Rail Input/Output Dual Op Amplifier Features: Input overvoltage protection, 32 V above and below the supply rails No phase reversal for input voltage up to ±32 V beyond the power supply Rail-to-rail input and output swing Low power: 60 μA per amplifier typical Unity-gain bandwidth 800 kHz typical at VSY = ±15 V 550 kHz typical at VSY = ±5 V 465 kHz typical at VSY = ±1.5 V Single-supply operation: 3 V to 30 V Low offset voltage: 300 μV maximum Large signal voltage gain: 120 dB typical Unity gain stable Qualified for automotive applications