OP AMP 900KHZ 0.3V/uS DIP-8; No. of Amplifiers:2 Amplifier; Bandwidth:900kHz; Slew Rate:0.3V/ s; Supply Voltage Range: 3V to 18V; Amplifier Case Style:DIP; No. of Pins:8Pins; Operating Temperature Min:0 C; Packaging:Each ;RoHS Compliant: Yes

INSTRUMENT AMPLIFIER 1.2MHZ 115DB DIP-8; No. of Amplifiers:1; Input Offset Voltage:200 V; Slew Rate:6V/ s; Bandwidth:1.2MHz; Supply Voltage Range: 4.5V to 18V; Amplifier Case Style:DIP; No. of Pins:8; CMRR:115dB; Packaging:Each;RoHS Compliant: Yes

IC Instrumentation Amplifier SINGLE SOP 16PIN PLASTIC

The ADCMP604?/ ADCMP605 are very fast comparators fabricated on the Analog Devices, Inc. proprietary XFCB2 process. These comparators are exceptionally versatile and easy to use. Features include an input range from VEE ? 0.5 V to VCCI + 0.2 V, low noise, LVDS-compatible output drivers, and TTL/CMOS latch inputs with adjustable hysteresis and/or shut-down inputs.The devices offer 1.5 ns propagation delays with 1 ps rms random jitter (RJ). Overdrive and slew rate dispersion are typically less than 50 ps.A flexible power supply scheme allows the devices to operate with a single 2.5 V positive supply and a ?0.5 V to +2.7 V input signal range up to a 5.5 V positive supply with a ?0.5 V to +5.7 V input signal range. Split input/output supplies, with no sequencing restrictions on the ADCMP605, support a wide input signal range with greatly reduced power consumption.The LVDS-compatible output stage is designed to drive any standard LVDS input. The comparator input stage offers robust protection against large input overdrive, and the outputs do not phase reverse when the valid input signal range is exceeded. High speed latch and programmable hysteresis features are also provided in a unique single-pin control option.The ADCMP604 is available in a 6-lead SC70 package, and the ADCMP605 is available in a 12-lead LFCSP.APPLICATIONS High speed instrumentation Clock and data signal restoration Logic level shifting or translation Pulse spectroscopy High speed line receivers Threshold detection Peak and zero-crossing detectors High speed trigger circuitry Pulse-width modulators Current-/voltage-controlled oscillators Automatic test equipment (ATE)

The LT5401 is an ultra-precision matched resistor network optimized for use with fully differential or difference amplifiers, and with excellent matching specifications over the entire temperature range. The LT5401 contains two strings of matched resistors, each providing three tap points. The resulting matched ratios arewell suited for precisely setting a differential amplifier?s gain or attenuation.When used to configure differential or difference gain, the LT5401?s excellent ratio matching ensures high CMRR, low gain errors and low gain drift to levels far too difficult to achieve with discrete passive components. This high level of precision reduces calibration requirements in many applications and offers 10 times higher performance than a ?0.01% discrete solution.The LT5401 is available in a compact 10-lead MSOP package with exposed paddle for improved thermal performance over a temperature range of ?55?C to 150?C.Applications Fully Differential Amplifiers Difference Amplifiers Reference Dividers Precision Summing/Subtracting

Precision, Selectable Gain, Fully Differential Funnel Amplifier Features: Precision attenuation: G = 0.4, G = 0.8 Fully differential or single-ended input/output Differential output designed to drive precision ADCs Drives switched capacitor and Σ-Δ ADCs Rail-to-rail output VOCM pin adjusts output common-mode voltage Robust overvoltage protection up to ±15 V (VS = +5 V) Single supply: 3 V to 10 V Dual supplies: ±1.5 V to ±5 V High performance Suited for driving 18-bit converters up to 4 MSPS 10 nV/√Hz output noise 3 ppm/°C gain drift 500 μV maximum output offset 50 V/μs slew rate Low power: 3.2 mA supply current

Ultralow Noise Amplifier at Lower Power Features: Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultra low distortion, 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew Rate: 12 V/μs Unity-gain stable Extended Industrial Temp Range 8-lead SOIC and 2 mm × 2 mm LFCSP packages

AMP QUAD Z-DRIFT RRI/O SMD 8631; No. of Amplifiers:4 Amplifier; Bandwidth:2.5MHz; Slew Rate:1V/µs; Supply Voltage Range:2.7V to 5V; Amplifier Case Style:SOIC; No. of Pins:14Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:AD8630 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:2.7V to 5V; Amplifier Type:Rail - Rail Input / Output (RRIO); Base Number:8630; Gain Bandwidth:2.5MHz; I/O Type:Rail-Rail I/O; IC Generic Number:8630; Input Offset Voltage Max:0.01mV; Logic Function Number:8630; No. of Amplifiers:4Amplifiers; Op Amp Type:Zero Drift; Operating Temperature Range:-40°C to +125°C; Supply Voltage + Nom:5V; Supply Voltage Max:6V; Supply Voltage Min:2.7V

General-Purpose, 55C to +125C, Wide Bandwidth, DC-Coupled VGA Features: Low noise Voltage noise: 3 nV/√Hz Current noise: 3 pA/√Hz Small-signal BW: 115 MHz Large-signal BW: 2 V p-p = 80 MHz Slew rate: 550 V/μs, 2 V p-p Gain ranges (specified) −14 dB to +46 dB 0 dB to 60 dB Gain scaling: 50 dB/V DC-coupled Single-ended input and output Supplies: ±3 V to ±12 V Temperature range: −55°C to +125°C Power 150 mW at ±3 V, −55°C < T < +125°C 84 mW at ±3 V, PWRA = 3 V

Low Power, Precision, Auto-Zero Op Amps Data Sheet