Rail-to-Rail Quad Operational Amplifier Features: Rail-to-rail output swing Single-supply operation: 3 V to 36 V Low offset voltage: 300 μV Gain bandwidth product: 75 kHz High open-loop gain: 1000 V/mV Unity-gain stable Low supply current/per amplifier: 150 μA maximum

Ultra Low Power, Class-D Audio Amplifier Features: Filterless digital input, mono differential output Class-D amplifier with 3-level Σ-Δ modulation optimized for headphone drive Operates from single 1.8 V supply 80 mW output power, 16 Ω load at <0.1% THD + N 2.57 μV rms noise, 113 dB A weighted signal-to-noise ratio and dynamic range 0.003% THD + N at 30 mW, 1 kHz output 32 Ω load I2C control with up to 4 pin selectable addresses or standalone operation Multiple serial data formats TDM, I2S, or left justified slave PDM input operating from 2.8224 MHz to 12.288 MHz Support sample rates from 8 kHz to 768 kHz 3.9 μs latency with 6 MHz PDM input Flexible digital gain adjustment DC blocking high-pass filter with programmable corner frequency 1.55 mW typical idle power in high performance mode Low power modes for reduced power consumption Flexible output gain limiter and clipping Auto power-down feature with zero digital input Short-circuit protection Pop and click suppression User-selectable ultralow EMI emissions mode Power-on reset 1.8 V PVDD supply 1.2 V to 1.8 V IOVDD supply 11-ball, 0.984 mm × 1.444 mm, 0.35 mm pitch WLCSP

OPERATIONAL AMPLIFIER ROHS COMPLIANT: YES

OPERATIONAL AMPLIFIER ROHS COMPLIANT: YES

Analog Comparators hi Speed Latched Comp-RSCML , 10GHz

DC to 1000 MHz IF Gain Block Features: Fixed gain of 16.5 dB Operation up to 1000 MHz 37 dBm Output Third-Order Intercept (OIP3) 3 dB noise figure Input/output internally matched to 50 Stable temperature and power supply 3 V or 5 V power supply 110 mA power supply current

Dual, Low Noise, Wideband Variable Gain Amplifier, 0 dB To +40 dB Gain Features: 2 channels with independent gain control Linear in dB gain response 2 gain ranges AD600: 0 dB to 40 dB AD602: -10 dB to +30 dB Accurate absolute gain: ±0.3 dB Low input noise: 1.4 nV/√Hz Low distortion: -60 dBc THD at ±1 V output High bandwidth: dc to 35 MHz (-3 dB) Stable group delay: ±2 ns Low power: 125 mW (maximum) per amplifier Signal gating function for each amplifier Drives high speed ADCs MIL-STD-883-compliant and DESC versions available

10 GHz, High Speed Window Comparator Features: Propagation delay: 88 ps Propagation delay at 50 mV overdrive: 20 ps Minimum detectable pulse width: 60 ps Differential latch control Power dissipation: 240 mW 16-terminal 2.9 mm × 2.9 mm LCC package

18 V, 725 A, 4 MHz CMOS RRIO Operational Amplifier Features: Low power at high voltage (18 V): 725 μA maximum Low offset voltage: 2.2 mV maximum over entire common-mode range Low input bias current: 15 pA maximum Gain bandwidth product: 4 MHz typical at Av = 100 Unity-gain crossover: 4 MHz typical −3 dB closed-loop bandwidth: 2.1 MHz typical Single-supply operation: 3 V to 18 V Dual-supply operation: ±1.5 V to ±9 V Unity-gain stable

General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SO