LTP5902IPC-IPMA1D0#PBF

Analog Devices Inc.
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes.The LTP5902-IPM is printed circuit board assembly (PCBA) product with on-board chip antenna in the Eterna® family of IEEE 802.15.4e solutions, featuring a highly integrated, low power radio design as well as an ARM Cortex-M3 32-bit microprocessor running SmartMesh IP embedded networking software. The LTP5902-IPM, at 37mm × 24mm, is built for surface-mount assembly.With SmartMesh IP time-synchronized networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. SmartMesh IP is a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform.The LTP5902-IPM’s behavior in a SmartMesh IP network is determined by the choice of SmartMesh IP network software loaded: Wireless Mote, EManager, Access Point Mote in a SmartMesh IP network. The SmartMesh IP software provided with the LTP5902-IPM is fully tested and validated, and is readily configured via a software Application Programming Interface. Once you have purchased SmartMesh IP products, the SmartMesh IP stack binaries may be downloaded via your myAnalog account. The pin signaling behavior of the LTP5902IPC-IPMA hardware is determined by the software loaded and is described in detail in the following product datasheets: LTP5902-IPM = LTP5902IPC-IPMA hardware + SmartMesh IP  Mote  Software → LTP5902-IPM Datasheet LTP5902-IPR = LTP5902IPC-IPMA hardware + SmartMesh IP EManager Software → LTP5902-IPR Datasheet LTP5902-IPA = LTP5902IPC-IPMA hardware + SmartMesh IP Access Point Software → LTP5902-IPA Datasheet Network Features Feature Benefit >99.999% Network Reliability Avoids communications dropouts common with other wireless networks NIST-certified AES-128 bit Encryption Data protected by end-to-end encryption, message integrity checking and device authentication Scalable Uses time-slotted channel-hopping protocol to avoid in-network collisions to maximize scale while minimizing power and latency-hungry transmission retries due to congestion Bidirectional Communications Ideal for both monitoring and control applications Up to 10 messages/second/node Time-slotted communications avoids contention. This data rate includes built-in margin for packet retries. Device Features Feature Benefit Industry-Leading Low Power Radio Technology • 4.5mA to Receive a Packet • 5.4mA to Transmit at 0dBm • 9.7mA to Transmit at 8dBm Pre-engineered RF RF elements include an on-chip power amplifier and are pre-tuned for optimized performance, including temperature compensation, saving development time. RF Modular Certifications Pre-certified in USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan Energy Harvesting Support Very low power design enables motes to be powered by a wide variety of energy harvesters. Click here to see a demonstration circuit of a SmartMesh IP mote powered by indoor light. Integrated Temperature Sensor Precise temperature sensor is integrated directly into the mote. ApplicationsSmartMesh IP is ideally suited for wireless Industrial Internet of Things (IoT) applications. To learn more about SmartMesh applications, click here.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5902IPC-IPMA1D0#PBF 0
Arrow North American Components LTP5902IPC-IPMA1D0#PBF 0 33 $57.12 $57.12 $57.12 $48.30 $48.30 $48.30
Mouser Electronics LTP5902IPC-IPMA1D0#PBF 0 33 $84.02 $84.02 $84.02 $84.02

LTP5901IPC-IPMA#PBF

Analog Devices Inc.
RF TRANSCEIVERS, 2.4GHZ, 250KBPS, -95DBM ROHS COMPLIANT: YES
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5901IPC-IPMA#PBF 0 $94.38 $94.38 $94.38 $94.38 $94.38 $94.38
Arrow North American Components LTP5901IPC-IPMA#PBF 0 22 $54.26 $53.09 $53.09 $53.09
element14 APAC LTP5901IPC-IPMA#PBF 19 1 $131.84 $131.84 $115.30 $115.30 $110.23 $110.23
Farnell LTP5901IPC-IPMA#PBF 22 1 $76.95 $76.95 $70.23 $70.23 $65.71 $65.71
Mouser Electronics LTP5901IPC-IPMA#PBF 80 1 $90.78 $86.10 $83.74 $83.74 $82.88 $82.88
Newark LTP5901IPC-IPMA#PBF 22 1 $97.23 $93.52 $91.67 $86.12 $86.12 $86.12
Verical Marketplace LTP5901IPC-IPMA#PBF 308 22 $57.12 $57.12 $57.12 $57.12

LTP5900IPC-WHMA1A2#PBF

Analog Devices Inc.
SmartMesh WirelessHART Mote Module (22-pin PCBA) Features: Serves as a Wireless Node, or Mote, in a SmartMesh WirelessHART network with: >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Incorporates a 2.4 GHz, IEEE 802.15.4 System-on-Chip, Complete with Embedded SmartMesh Networking Software MMCX antenna connector, 39 mm × 24.4 mm PCBA module Compliant to the WirelessHART standard (IEC62591) These products contain encryption. Import/export restrictions may apply.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5900IPC-WHMA1A2#PBF 0
Mouser Electronics LTP5900IPC-WHMA1A2#PBF 0 100 $126.46 $126.46 $126.46

LTP5901IPC-WHMA1A2#PBF

Analog Devices Inc.
SmartMesh WirelessHART Mote Module with Chip Antenna Features: Serves as a Wireless Node, or Mote, in a SmartMesh WirelessHART network with: >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Incorporates a 2.4 GHz, IEEE 802.15.4 System-on-Chip, Complete with Embedded SmartMesh Networking Software On-board chip antenna, 42 mm x 24 mm PCBA module Compliant to the WirelessHART standard (IEC62591) These products contain encryption. Import/export restrictions may apply.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5901IPC-WHMA1A2#PBF 0
Mouser Electronics LTP5901IPC-WHMA1A2#PBF 0 22 $110.73 $110.73 $110.73 $110.73

LTP5901IPC-WHMA1B2#PBF

Analog Devices Inc.
SmartMesh WirelessHART Mote Module with Chip Antenna Features: Serves as a Wireless Node, or Mote, in a SmartMesh WirelessHART network with: >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Incorporates a 2.4 GHz, IEEE 802.15.4 System-on-Chip, Complete with Embedded SmartMesh Networking Software On-board chip antenna, 42 mm x 24 mm PCBA module Compliant to the WirelessHART standard (IEC62591) These products contain encryption. Import/export restrictions may apply.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5901IPC-WHMA1B2#PBF 0
Mouser Electronics LTP5901IPC-WHMA1B2#PBF 0 22 $110.73 $110.73 $110.73 $110.73

LTP5903CEN-WHRB4B3#PBF

Analog Devices Inc.
SmartMesh WirelessHART Embedded Manager Features: Serves as a Network Manager in a SmartMesh WirelessHART network to Enable: >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Single Board Computer with 2.4 GHz, IEEE 802.15.4 System-on-Chip, Complete with Embedded SmartMesh Networking Software 103mm x 56mm stacked PCB assembly
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5903CEN-WHRB4B3#PBF 0 $917.17 $917.17 $917.17 $917.17 $917.17 $917.17
Mouser Electronics LTP5903CEN-WHRB4B3#PBF 0 100 $1,178.68 $1,178.68 $1,178.68

LTP5903CEN-WHRB4B1#PBF

Analog Devices Inc.
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. Based on the WirelessHART (IEC62591) standard, the LTP5903-WHR runs SmartMesh WirelessHART network management software to monitor and manage network performance and provide a data ingress/egress point via a UART interface. It provides the core networking functionality, enabling the network to achieve unsurpassed levels of resilience, reliability, and scalability with advanced network management and comprehensive security features.The LTP5903-WHR is designed for use in line-powered gateways and controllers, such as WirelessHART Gateways, and enables customers to integrate a standards-based wireless sensor network that provides scalable bidirectional communications.The embedded network manager offers a comprehensive software application programming interface (API) to deliver rich and flexible functionality without complex coding. This API also provides full visibility and control over network configuration, security administration, network status, and performance statistics. The network-ready embedded manager enables industrial automation vendors to integrate advanced wireless sensor networking intelligence into monitoring and control solutions with low risk and rapid time-to-market. Network Features Features Benefit Time Synchronized Channel Hopping Communications >99.999% network reliability in even the most challenging RF environments. Sub 50 µA Routers Can build out a network without any line powered devices. Flexibility to be line powered or energy harvested if desired. Secure Mesh with 128-bit AES Encryption NIST Certified Security. Compromise of one node does not compromise network. Standards-based Compliant to IEC62591 (WirelessHART). Highly Accurate Time Stamping Time stamping on every node is available to applications with millisecond accuracy. Manager Features Features Benefit Advanced Network Management Dynamically optimizes mesh connectivity based on the changing RF environment. Scalable Network Management Manages Networks of Up to 250 Nodes (LTP5903-WHRB) or Up to 500 Nodes (LTP5903-WHRC). Load Balancing and Optimization Adds more bandwidth for the busiest motes while maintaining normal traffic flow for the rest of network.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5903CEN-WHRB4B1#PBF 0 $917.17 $917.17 $917.17 $917.17 $917.17 $917.17
Arrow North American Components LTP5903CEN-WHRB4B1#PBF 0 1 $857.17 $857.17 $857.17 $857.17 $857.17 $857.17
Mouser Electronics LTP5903CEN-WHRB4B1#PBF 0 1 $988.73 $988.73 $988.73 $988.73 $988.73 $988.73

LTP5903CEN-WHRC4B1#PBF

Analog Devices Inc.
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. Based on the WirelessHART (IEC62591) standard, the LTP5903-WHR runs SmartMesh WirelessHART network management software to monitor and manage network performance and provide a data ingress/egress point via a UART interface. It provides the core networking functionality, enabling the network to achieve unsurpassed levels of resilience, reliability, and scalability with advanced network management and comprehensive security features.The LTP5903-WHR is designed for use in line-powered gateways and controllers, such as WirelessHART Gateways, and enables customers to integrate a standards-based wireless sensor network that provides scalable bidirectional communications.The embedded network manager offers a comprehensive software application programming interface (API) to deliver rich and flexible functionality without complex coding. This API also provides full visibility and control over network configuration, security administration, network status, and performance statistics. The network-ready embedded manager enables industrial automation vendors to integrate advanced wireless sensor networking intelligence into monitoring and control solutions with low risk and rapid time-to-market. Network Features Features Benefit Time Synchronized Channel Hopping Communications >99.999% network reliability in even the most challenging RF environments. Sub 50 µA Routers Can build out a network without any line powered devices. Flexibility to be line powered or energy harvested if desired. Secure Mesh with 128-bit AES Encryption NIST Certified Security. Compromise of one node does not compromise network. Standards-based Compliant to IEC62591 (WirelessHART). Highly Accurate Time Stamping Time stamping on every node is available to applications with millisecond accuracy. Manager Features Features Benefit Advanced Network Management Dynamically optimizes mesh connectivity based on the changing RF environment. Scalable Network Management Manages Networks of Up to 250 Nodes (LTP5903-WHRB) or Up to 500 Nodes (LTP5903-WHRC). Load Balancing and Optimization Adds more bandwidth for the busiest motes while maintaining normal traffic flow for the rest of network.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5903CEN-WHRC4B1#PBF 0 $1,417.93 $1,417.93 $1,417.93 $1,417.93 $1,417.93 $1,417.93
Arrow North American Components LTP5903CEN-WHRC4B1#PBF 0 1 $1,079.32 $1,079.32 $1,079.32 $1,079.32 $1,079.32 $1,079.32
Mouser Electronics LTP5903CEN-WHRC4B1#PBF 0 1 $1,528.57 $1,528.57 $1,528.57 $1,528.57 $1,528.57 $1,528.57

LTP5903IPC-WHRB4B1#PBF

Analog Devices Inc.
SmartMesh WirelessHART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. Based on the WirelessHART (IEC62591) standard, the LTP5903-WHR runs SmartMesh WirelessHART network management software to monitor and manage network performance and provide a data ingress/egress point via a UART interface. It provides the core networking functionality, enabling the network to achieve unsurpassed levels of resilience, reliability, and scalability with advanced network management and comprehensive security features.The LTP5903-WHR is designed for use in line-powered gateways and controllers, such as WirelessHART Gateways, and enables customers to integrate a standards-based wireless sensor network that provides scalable bidirectional communications.The embedded network manager offers a comprehensive software application programming interface (API) to deliver rich and flexible functionality without complex coding. This API also provides full visibility and control over network configuration, security administration, network status, and performance statistics. The network-ready embedded manager enables industrial automation vendors to integrate advanced wireless sensor networking intelligence into monitoring and control solutions with low risk and rapid time-to-market. Network Features Features Benefit Time Synchronized Channel Hopping Communications >99.999% network reliability in even the most challenging RF environments. Sub 50 µA Routers Can build out a network without any line powered devices. Flexibility to be line powered or energy harvested if desired. Secure Mesh with 128-bit AES Encryption NIST Certified Security. Compromise of one node does not compromise network. Standards-based Compliant to IEC62591 (WirelessHART). Highly Accurate Time Stamping Time stamping on every node is available to applications with millisecond accuracy. Manager Features Features Benefit Advanced Network Management Dynamically optimizes mesh connectivity based on the changing RF environment. Scalable Network Management Manages Networks of Up to 250 Nodes (LTP5903-WHRB) or Up to 500 Nodes (LTP5903-WHRC). Load Balancing and Optimization Adds more bandwidth for the busiest motes while maintaining normal traffic flow for the rest of network.
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Analog Devices Inc LTP5903IPC-WHRB4B1#PBF 0 $753.64 $753.64 $753.64 $753.64 $753.64 $753.64
Arrow North American Components LTP5903IPC-WHRB4B1#PBF 0 1 $704.33 $1,084.14 $1,016.66 $994.14 $975.15 $975.15
Mouser Electronics LTP5903IPC-WHRB4B1#PBF 0 1 $812.44 $812.44 $812.44 $812.44 $812.44 $812.44
Verical Marketplace LTP5903IPC-WHRB4B1#PBF 3 1 $1,090.44 $1,084.14 $1,016.66 $994.14 $975.15 $975.15

TMDSCCS-ALLN01

Texas Instruments
Code Composer Studio IDE - Node Locked Single User
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Texas Instruments TMDSCCS-ALLN01 69 $495.00
DigiKey 296-31410-ND 0 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
Win Source TMDSCCS-ALLN01 1 1
Arrow North American Components TMDSCCS-ALLN01 0 1 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
AVNET Asia Pacific TMDSCCS-ALLN01 0 1 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
AVNET Europe TMDSCCS-ALLN01 0 1 * $0.00 * $0.00 * $0.00 * $0.00 * $0.00 * $0.00
AVNET Express TMDSCCS-ALLN01 0 1 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
element14 APAC TMDSCCS-ALLN01 1 1 * $656.21 * $656.21 * $656.21 * $656.21 * $656.21 * $656.21
Farnell TMDSCCS-ALLN01 1 1 * $978.00 * $726.84 * $726.84 * $726.84 * $726.84 * $726.84
Mouser Electronics 595-TMDSCCS-ALLN01 0 1
Newark TMDSCCS-ALLN01 3 1 $217.80 $217.80 $217.80 $217.80 $217.80 $217.80