VCO with Divide-by-4, 8.6 - 10.2 GHz Features: Dual Output: Fo = 8.6 - 10.2 GHz Fo/4 = 2.15 - 2.55 GHz Pout: +18 dBm Phase Noise: -100 dBc/Hz @ 100 kHz Typ. No External Resonator Needed 32 Lead 5×5 mm QFN Package: 25 mm2

The AD2S99 programmable sinusoidal oscillator provides sine wave excitation for resolvers and a wide variety of ac transducers.The AD2S99 also provides a synchronous reference output signal (3 VP-P square wave) that is phase locked to its SIN and COS inputs. In an application, the SIN and COS inputs are connected to the transducer’s secondary windings. The synchronous reference output compensates for temperature and cabling dependent phase shifts and eliminates the need for external preset phase compensation circuits. The synchronous reference output can be used as a zero crossing reference for resolver-to-digital converters such as Analog Devices’ AD2S80A, AD2S82A, AD2S83 and AD2S90.The AD2S99 is packaged in a 20-pin PLCC and operates over –40ºC to +85ºC.PRODUCT HIGHLIGHTS Dynamic Phase Compensation The AD2S99 dynamically compensates for any phase variation in a transducer by phase locking its synchronous reference output to the transducer’s secondary windings. Programmable Excitation Frequency The excitation frequency is easily programmed to 2 kHz, 5 kHz, 10 kHz, or 20 kHz by using the frequency select pins. Intermediate frequencies are available by adding an external resistor. Signal Loss Detection The AD2S99 has the ability to detect if both the transducer secondary winding connections become disconnected from its SIN and COS inputs. The “LOS” output pin pulls high when a signal loss is detected. Integration The AD2S99 integrates the transducer excitation, synchronous reference, and loss of signal detection functions into a small, cost effective package.APPLICATIONSExcitation Source for: Resolvers Synchros LVDTs RVDTs Pressure Transducers Load Cells AC Bridges

The AD2S99 programmable sinusoidal oscillator provides sine wave excitation for resolvers and a wide variety of ac transducers.The AD2S99 also provides a synchronous reference output signal (3 VP-P square wave) that is phase locked to its SIN and COS inputs. In an application, the SIN and COS inputs are connected to the transducer’s secondary windings. The synchronous reference output compensates for temperature and cabling dependent phase shifts and eliminates the need for external preset phase compensation circuits. The synchronous reference output can be used as a zero crossing reference for resolver-to-digital converters such as Analog Devices’ AD2S80A, AD2S82A, AD2S83 and AD2S90.The AD2S99 is packaged in a 20-pin PLCC and operates over –40ºC to +85ºC.PRODUCT HIGHLIGHTS Dynamic Phase Compensation The AD2S99 dynamically compensates for any phase variation in a transducer by phase locking its synchronous reference output to the transducer’s secondary windings. Programmable Excitation Frequency The excitation frequency is easily programmed to 2 kHz, 5 kHz, 10 kHz, or 20 kHz by using the frequency select pins. Intermediate frequencies are available by adding an external resistor. Signal Loss Detection The AD2S99 has the ability to detect if both the transducer secondary winding connections become disconnected from its SIN and COS inputs. The “LOS” output pin pulls high when a signal loss is detected. Integration The AD2S99 integrates the transducer excitation, synchronous reference, and loss of signal detection functions into a small, cost effective package.APPLICATIONSExcitation Source for: Resolvers Synchros LVDTs RVDTs Pressure Transducers Load Cells AC Bridges

The HMC1168 is a monolithic microwave integrated circuit(MMIC), voltage controlled oscillator (VCO) that integrates aresonator, a negative resistance device, and a varactor diode,and features a half frequency output.Because of the monolithic construction of the oscillator, theoutput power and phase noise performance are excellent overtemperatureThe output power is 10 dBm typical from a 5 V supply voltage.The VCO is housed in a RoHS compliant LFCSP and requiresno external matching components.Applications Point to point and multipoint radios  Test equipment and industrial controls  Very small aperture terminals (VSATs) 

The HMC514LP5(E) is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCO. The HMC514LP5(E) integrates resonators, negative resistance devices, varactor diodes and feature half frequency and divide-by-4 outputs. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +7 dBm typical from a +3V supply voltage. The prescaler function can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components.APPLICATIONS VSAT Radio Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use

The HMC737 is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCO. The HMC737 integrate a resonator, negative resistance device, varactor diode and feature half frequency output. The VCO's phase noise performance is excellent over temperature, shock, and process due to the oscillator's monolithic structure. Power output is +9 dBm typical from a +4.2V supply voltage. The voltage controlled oscillator is packaged in a leadless QFN 4x4 mm surface mount package, and requires no external matching components.APPLICATIONS Point-to-Multi-Point Radios Test Equipment & Industrial Controls SATCOM Military End-Use

VCO, W/BUFFER AMP, 6.1GHZ-6.72GHZ, QFN24;

VCO Oscillators VCO SMT w/Buffer amp, 5.0 - 5.5 GHz

VCO Oscillators VCO SMT w/Buffer amp 3.15 - 3.4 GHz

VCO, W/BUFFER AMP, 5.6-6.8GHZ, MSOP-8 ROHS COMPLIANT: YES