R/D Converter 12 b Serial, Parallel 44-LQFP (10x10)

Digital to Analog Converters - DAC OCTAL 12 BIT SPI MICROPOWER DAC IC

12 Bit Digital to Analog Converter 2 24-SOIC

Digital to Analog Converters - DAC Single 5V 16bit SPI DAC with reference

Analog to Digital Converters - ADC 10 BIT, SINGLE, PARALLEL,ADC I.C.

12 Bit Digital to Analog Converter 1 16-PDIP

10 Bit Digital to Analog Converter 1 28-TSSOP

18-Bit, 2 MSPS/1 MSPS/500 kSPS, Precision, Pseudo Differential, SAR ADCs Features: Easy Drive Greatly reduced input kickback Input current reduced to 0.5 μA/MSPS Enhanced acquisition phase, ≥79% of cycle time at 1 MSPS First conversion accurate, no latency or pipeline delay Input span compression for single-supply operation Fast conversion allows low SPI clock rates Input overvoltage clamp protection sinks up to 50 mA SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface High performance Pseudo differential analog input range 0 V to VREF with VREF from 2.4 V to 5.1 V Throughput: 2 MSPS/1 MSPS/500 kSPS options INL: ±3.2 LSB maximum Guaranteed 18-bit, no missing codes SNR: 95 dB at fIN = 1 kHz at VREF = 5 V THD: −125 dB at fIN = 1 kHz, −108 dB at fIN = 100 kHz SINAD: 84.5 dB at fIN = 1 MHz (see Figure 17 in data sheet) Oversampled dynamic range 98 dB for OSR = 2 125 dB for OSR = 1024 Low power Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface 2.5 mW at 500 kSPS (VDD only) 70 μW at 10 kSPS, 14 mW at 2 MSPS (total power) 10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP Pin compatible with AD4003/AD4007/AD4011 family Guaranteed operation: −40°C to +125°C

Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

32 A, Ultra Low Power, 24-Bit Sigma-Delta ADC with Integrated PGA and FIFO Features: Ultralow current consumption (typical): 32 μA: continuous conversion mode (gain = 128) 5 μA: duty cycling mode (ratio = 1/16) 0.5 μA: standby mode 0.1 μA: power-down mode Built-in features for system level power savings: Current saving duty cycle ratio: 1/4 or 1/16 Smart sequencer and per channel configuration minimizes host processor load Deep embedded FIFO minimizes host processor load (depth of 256 samples) Autonomous FIFO interrupt functionality, threshold detection Single supply as low as 1.71 V increasing battery length RMS noise: 25 nV rms at 1.17 SPS (gain = 128) – 48 nV/√Hz Up to 22 noise free bits (gain = 1) Output data rate: 1.17 SPS to 2.4 kSPS Operates from 1.71 V to 3.6 V single supply or ±1.8 V split supplies Band gap reference with 15 ppm/°C maximum drift PGA with rail-to-rail analog input Adaptable sensor interfacing functionality: Matched programmable excitation currents for RTDs On-chip bias voltage generator for thermocouples Low-side power switch for bridge transducers Sensor open wire detection Internal temperature sensor and oscillator Self and system calibration Flexible filter options Simultaneous 50 Hz/60 Hz rejection (on selected filter options) General-purpose outputs Diagnostic functionality Crosspoint multiplexed inputs 8 differential/16 pseudo differential inputs 5 MHz SPI (3-wire or 4-wire) Available in 35-ball, 2.74 mm × 3.6 mm WLCSP Temperature range: −40°C to +105°C