Isolated Sigma-Delta Modulator Features: 20 MHz maximum external clock rate Second-order modulator 16 bits, no missing codes ±2 LSB INL typical at 16 bits 1 µV/°C typical offset drift On-board digital isolator On-board reference ±250 mV analog input range Low power operation: 17 mA typical at 5.5 V −40°C to +125°C operating range 16-lead SOIC package Internal clock version: AD7400A Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 891 V peak Qualified for Automotive Applications

16-Bit, Isolated Sigma-Delta Modulator Features: 5 MHz to 20 MHz external clock input rate 16 bits, no missing codes Signal to noise ratio (SNR): 88 dB (typical) Effective number of bits (ENOB): 14.2 bits typical Typical offset drift vs. temperature: 1.6 μV/°C typical On-board digital isolator On-board reference See data sheet for additional featuresAD7403-EP supports defense and aerospace applications (AQEC standard) Download AD7403-EP data sheet Military temperature range: −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/16625 DSCC Drawing Number

Dual 12-Bit CMOS DAC with Parallel Load Input Structure Features: Two 12-bit DACs in One Package DAC Ladder Resistance Matching: 0.5% Space Saving Skinny DIP and Suface Mount Packages 4-Quadrant Multiplication Low Gain Error (1 LSB max Over Temperature) Fast Interface Timing

12-Bit, Multiplying, IOUT DAC, 8-Bit Bus Features: All Grades 12-Bit Monotonic Over Full Temperature Ranges Skinny DIP and Surface Mount Packages 8-Bit Bus Compatible 12-Bit DAC Low Gain Drift of 5 ppm/°C Maximum Full 4 Quadrant Multiplication Operation Specified at +5V, +12V or +15V Power Supply

4-Channel, 4 MSPS, 14-Bit, Dual, Simultaneous Sampling SAR ADC Features: 16-bit, 14-bit, or 12-bit dual simultaneous sampling SAR ADC Single-ended analog inputs 4-channel with 2:1 multiplexers Channel sequencer mode High throughput rate of up to 4 MSPS SNR (typical) 87.5 dB (AD7386), VREF = 3.3 V external 84 dB (AD7387), VREF = 3.3 V external 73.8 dB (AD7388) 93 dB with OSR = 8, VREF = 2.5 V internal (AD7386) On-chip oversampling functions INL (typical) ±1.5 LSB (AD7386) ±0.5 LSB (AD7387) ±0.2 LSB (AD7388) Resolution boost function 2.5 V internal reference at 10 ppm/°C (maximum) Alert function −40°C to +125°C temperature range 16-lead, 3 mm × 3 mm LFCSP

12-Bit Power Amplifier Current Controller with ADC, DACs, Temperature and Current Sensors Features: 4 closed-loop power amplifier (PA) drain current controllers Built-in PA protection, sequencing, and alert features Compatible with both depletion mode and enhancement mode power amplifiers Highly integrated 4 uncommitted 12-bit analog-to-digital converter (ADC) inputs ±0.5 LSB typical integral nonlinearity (INL) Eight 12-bit voltage digital-to-analog converters (DACs) 1.3 μs maximum settling 4 high-side current sense amplifiers, ±0.1% gain error 2 external temperature sensor inputs, ±1.1°C accuracy Internal temperature sensor, ±1.25°C accuracy 2.5 V on-chip reference Flexible monitoring and control ranges ADC input ranges: 0 V to 1.25 V, 0 V to 2.5 V, and 0 V to 5 V Bipolar DAC ranges: 0 V to +5 V, −4 V to +1 V, and −5 V to 0 V Bipolar DAC reset and clamping relative to VCLAMPx voltage Unipolar DAC ranges: 0 V to 5 V, 2.5 V to 7.5 V, and 5 V to 10 V Current sense gain: 6.25, 12.5, 25, 50, 100, and more Adjustable closed-loop setpoint ramp time High-side voltage current sensing 4 current sense inputs 4 V to AVSS + 60 V, ±200 mV input range Small package and flexible interface Serial port interface (SPI) with VDRIVE supporting 1.8 V, 3 V, and 5 V interfaces 56-lead LFCSP Temperature range: −40°C to +125°C

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC Features: Multiple pins/software-programmable input ranges +5 V (10 VP-P), +10 V (20 VP-P), ±5 V (20 VP-P), ±10 V (40 VP-P) Pins or serial SPI®-compatible input ranges/mode selection Throughput 1 MSPS (warp mode) 800 kSPS (normal mode) 670 kSPS (impulse mode) 14-bit resolution with no missing codes INL: ±0.3 LSB typical, ±1 LSB maximum (±61 ppm of FSR) SNR: 85 dB @ 2 kHz iCMOS® process technology 5 V internal reference: typical drift 3 ppm/°C; TEMP output No pipeline delay (SAR architecture) Parallel (14- or 8-bit bus) and serial 5 V/3.3 V interface SPI-/QSPI™-/MICROWIRE™-/DSP-compatible Power dissipation 235 mW @ 1 MSPS 10 mW @ 1 kSPS

4-Channel, 1.5 MSPS, 10-Bit Parallel ADC with a Sequencer Features: Throughput rate: 1.5 MSPS Specified for VDD of 2.7 V to 5.25 V Low power  6 mW maximum at 1.5 MSPS with 3 V supplies  13.5 mW maximum at 1.5 MSPS with 5 V supplies Software configurable analog inputs  4-channel single-ended inputs  2-channel fully differential inputs  2-channel pseudo differential inputs 4 analog input channels with a sequencer Accurate on-chip 2.5 V reference ±0.2% maximum @ 25°C, 25 ppm/°C maximum (AD7934) 70 dB SINAD at 50 kHz input frequency No pipeline delays High speed parallel interface—word/byte modes Full shutdown mode: 2 μA maximum 28-lead TSSOP package

8-Channel, 12-Bit ADC with I2C Compatible Interface in 20-Lead TSSOP Features: 12-Bit ADC with Fast Conversion Time: 2 µs Eight Single-Ended Analog Input Channels Specified for VDD of 2.7 V to 5.5 V Low Power Consumption Fast Throughput Rate: - 188 kSPS Sequencer Operation Automatic Cycle Mode I2C® Compatible Serial Interface I2C® Interface supports: Standard, Fast, and High-Speed Modes Out of Range Indicator Pin-Selectable Addressing via AS Automatic Shutdown Mode: - 1 µA max

16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Features: High performance Pseudo differential analog input range 0 V to VREF with VREF between 2.5 V to 5 V Throughput: 1 MSPS Zero latency architecture 16-bit resolution with no missing codes INL: 0.6 LSB typical, 1.25 LSB maximum Dynamic range: 92 dB, VREF = 5 V SNR: 91.5 dB at fIN = 10 kHz, VREF = 5 V THD: 114 dB at fIN = 10 kHz, VREF = 5 V SINAD: 91 dB at fIN = 10 kHz, VREF = 5 V Low power dissipation Single-supply 2.5 V operation with 1.8 V/2.5 V/3 V/5 V logic interface 4 mW at 1 MSPS (VDD only) 7 mW at 1 MSPS (total) 70 μW at 10 kSPS Proprietary serial interface SPI/QSPI/MICROWIRE™/DSP compatible Daisy-chain multiple ADCs and busy indicator 10-lead MSOP, 10-lead, 3 mm × 3 mm LFCSP Wide operating temperature range: 40C to +125CAD7980-EP supports defense and aerospace applications (AQEC) Download AD7980-EP data sheet (pdf) Controlled manufacturing baseline  One assembly/test site  One fabrication site  Enhanced product change notification  Qualification data available on request Military temperature range: −55°C to +125°C V62/12640 DSCC Drawing Number