The MAX3949 is a 3.3V, multirate, low-power laser diode driver designed for Ethernet, Fibre Channel, and SONET transmission systems at data rates up to 11.3Gbps. This device is optimized to drive a differential transmitter optical subassembly (TOSA) with a 25Ω flex circuit. The unique design of the output stage enables use of unmatched TOSAs.The device receives differential AC-coupled signals with on-chip termination. It can deliver laser modulation currents of up to 85mA at an edge speed of 22ps (20% to 80%) into a 5Ω external differential load. The device is designed to have a high-bandwidth differential signal path with on-chip back termination resistors integrated into its outputs. An input equalization block can be activated to compensate for SFP+ host connector losses. The integrated bias circuit provides programmable laser bias currents up to 105mA. Both the laser bias current generator and the laser modulator can be disabled from a single pin.The use of a 3-wire digital interface reduces the pin count while permitting adjustment of input equalization, polarity, output deemphasis, and modulation and bias currents without the need for external components. The device is available in a 3mm x 3mm, 16-pin TQFN package, and is specified for the -40°C to +95°C extended temperature range.Applications10GBASE-LR SFP+ Optical Transceivers10GBASE-LRM SFP+ Optical TransceiversOC192-SR SFP+ SDH/SONET Transceivers

Laser Drivers 3.3V 622Mbps SDH/SONET

Clock and Data Recovery IC 32-Pin QFN

Laser Drivers Laser Driver For Projectors

2.5V 1.25Gbps Laser Diode Driver

Laser Drivers 3.3V, 4.25Gbps Optical Transceiver (Limiting Post Amp plus Laser Diode Driver)

3.3V, 3.2Gbps VCSEL Driver Features: 60ps Rise and Fall Times, 10ps Deterministic Jitter 155Mbps to 3.2Gbps Laser Diode Driver for VCSELs Eye Diagram is Stable and Consistent Across Modulation Range and Temperature 1mA to 12mA Modulation Current Easy Board Layout, Laser can be Remotely Located if Desired No Input Matching or AC Coupling Components Needed On-Chip ADC for Monitoring Critical Parameters Digital Setup and Control with I2C™ Serial Interface Emulation and Set-Up Software Available Operates Standalone or with a Microprocessor On-Chip DACs Eliminate External Potentiometers Constant Current or Automatic Power Control First and Second Order Temperature Compensation On-Chip Temperature Sensor Extensive Eye Safety Features Single 3.3V Supply 4mm × 4mm QFN Package

Laser Drivers 3.2Gbps, Low-Power, Compact, SFP Laser Driver

Laser Drivers 3.2Gbps, Low-Power, Compact, SFP Laser D

The MAX3646 is a +3.3V laser driver designed for multirate transceiver modules with data rates from 155Mbps to 622Mbps. Lasers can be DC-coupled to the MAX3646 for reduced component count and ease of multirate operation.Laser extinction ratio control (ERC) combines the features of automatic power control (APC), modulation compensation, and built-in thermal compensation. The APC loop maintains constant average optical power. Modulation compensation increases the modulation current in proportion to the bias current. These control loops, combined with thermal compensation, maintain a constant optical extinction ratio over temperature and lifetime.The MAX3646 accepts differential data input signals. The wide 5mA to 60mA (up to 85mA AC-coupled) modulation current range and up to 100mA bias current range, make the MAX3646 ideal for driving FP/DFB lasers in fiber optic modules. External resistors set the required laser current levels. The MAX3646 provides transmit disable control (TX_DISABLE), single-point fault tolerance, bias-current monitoring, and photocurrent monitoring. The device also offers a latched failure output (TX_FAULT) to indicate faults, such as when the APC loop is no longer able to maintain the average optical power at the required level. The MAX3646 is compliant with the SFF-8472 transmitter diagnostic and SFP MSA timing requirements.The MAX3646 is offered in a 4mm x 4mm, 24-pin thin QFN package and operates over the extended -40°C to +85°C temperature range.Applications125Mbps Ethernet SFP, GBIC, and 1 x 9 TransceiversMultirate OC-3 to OC-12 FEC Transceivers