SMT 13 Gbps, 2:1 Selector Features: Supports High Data Rates: up to 13 Gbps Single-Ended Inputs Differential & Single-Ended Outputs Fast Rise & Fall Times: 17/15 ps Low Power Consumption: 250 mW typ. Programmable Differential Output Voltage Swing: 600 - 1200 mV Propagation Delay: 125 ps Single Supply: -3.3V 16 Lead Ceramic 3×3mm SMT Package: 9mm2

Logic Gates 13 Gbps Fast Rise Time XOR / XNOR Gate

Flip-Flops 43 Gbps D Flip-Flop w/ prgrm Out volt

The HMC722LP3E is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC772LP3E may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR. The HMC722LP3E also features an output level control pin, VR, which allows for loss compensation or for signal level optimization.All input signals to the HMC722LP3E are terminated with 50ω to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC722LP3E may be either AC or DC coupled. Outputs can be connected directly to a 50ω to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50ω to a non-ground DC voltage. The HMC722LP3E operates from a single -3.3V DC supply, and is available in a RoHS compliant 3 × 3 mm SMT package.APPLICATIONS RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 13 Gbps Digital Logic Systems up to 13 GHz NRZ-to-RZ Conversion

The ADG3245 is a 2.5 V or 3.3 V, 8-bit, 2-port digital switch.It is designed on Analog Devices’ low voltage CMOS process,which provides low power dissipation yet gives high switchingspeed and very low on resistance, allowing inputs to be connectedto outputs without additional propagation delay or generatingadditional ground bounce noise.The switches are enabled by means of the bus enable (BE) inputsignal. These digital switches allow bidirectional signals to beswitched when ON. In the OFF condition, signal levels up tothe supplies are blocked.This device is ideal for applications requiring level translation.When operated from a 3.3 V supply, level translation from 3.3 Vinputs to 2.5 V outputs is allowed. Similarly, if the device isoperated from a 2.5 V supply and 2.5 V inputs are applied, thedevice will translate the outputs to 1.8 V. In addition to this, alevel translating select pin (SEL) is included. When SEL is low,VCC is reduced internally, allowing for level translation between3.3 V inputs and 1.8 V outputs. This makes the device suited toapplications requiring level translation between different supplies,such as converter to DSP/microcontroller interfacing.APPLICATIONS 3.3 V to 1.8 V voltage translation 3.3 V to 2.5 V voltage translation 2.5 V to 1.8 V voltage translation Bus switching Bus isolation Hot swap Hot plug Analog switch applicationsPRODUCT HIGHLIGHTS 3.3 V or 2.5 V supply operation Extremely low propagation delay through switch 4.5 Ω switches connect inputs to outputs Level/voltage translation 20-lead TSSOP and LFCSP (4 mm × 4 mm) packages

The HMC745 is a XOR/XNOR gate function designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC745 also features an output level control pin, VR, which permits loss compensation or signal level optimization. All input and output signals to the HMC745 are terminated with 50 Ω to VCC on-chip, and can be either ac-coupled or dc-coupledInputs or outputs can be connected directly to a 50 Ω VCC terminated system, while dc blocking capacitors may be used if the terminating system is 50 Ω to ground. The HMC745 operates from a single 3.3 V dc supply, and is available in a ceramic, RoHS compliant, 3 mm × 3 mm LCC package.Applications RF automatic test equipment (ATE) applications Broadband test and measurement Serial data transmission up to 13 Gbps Digital logic systems up to 13 GHz

The HMC746LC3C is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 14 Gbps, and clock frequencies as high as 14 GHz. The HMC746LC3C may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR.All differential inputs to the HMC746LC3C are CML and terminated on-chip with 50 Ohms to the positive supply, Vcc, and may be AC or DC coupled. The differential CML outputs are source terminated to 50 Ohms and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ohm Vcc-terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC746LC3C also features an output level control pin, VR, which allows for loss compensation or signal-level optimization. the HMC746LC3C operates from a single 3.3 V supply and is available in ROHS-compliant 3x3 mm SMT package.APPLICATIONS RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 13 Gbps Digital Logic Systems up to 13 GHz NRZ-to-RZ Conversion

Internally Trimmed Precision IC Multiplier Features: All Inputs (X, Y and Z) Differential, High Impedance for [(X1 - X2) (Y1 - Y2)/10] + Z2 Transfer Function Scale-Factor Adjustable to Provide up to X10 Gain Pretrimmed to ±0.5% Max 4-Quadrant Error Low Noise, Design: 90 µV rms, 10 Hz-10 kHz Low Cost, Monolithic Construction Excellent Long-Term Stability

Encoders, Decoders, Multiplexers & Demultiplexers 1:4 Demux

The HMC853LC3 is a D-Type Flip-Flop designed to support data transmission rates of up to 28 Gbps, and clock frequencies as high as 28 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications.All differential inputs to the HMC853LC3 are CML and terminated on-chip with 50 Ω to the positive supply, VCC, and may be AC or DC coupled. The differential CML outputs are source terminated to 50 Ω and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ω VCC-terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ω to ground. The HMC853LC3 also features an output level control pin, VR, which allows for loss compensation or signal-level optimization. the HMC853LC3 operates from a single 3.3 V supply and is available in ROHS-compliant 3×3 mm SMT package.APPLICATIONS RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 28 Gbps Digital Logic Systems up to 28 GHz