The ADXRS800 is an angular rate sensor (gyroscope) intended for automotive electronic stability control, vehicle rollover detection, and other high performance applications. An advanced, differential, quad-sensor design rejects the influence of linear acceleration, enabling the ADXRS800 to operate in exceedingly harsh environments where shock and vibration are present.The ADXRS800 uses an internal, continuous self-test archi-tecture. The integrity of the electromechanical system is checked by applying a high frequency electrostatic force to the sense structure to generate a rate signal that can be differentiated from the baseband rate data and internally analyzed.The ADXRS800 is capable of sensing an angular rate of up to ?300?/sec. Angular rate data is presented as a 16-bit word, as part of a 32-bit SPI message.The ADXRS800 is available in a cavity plastic SOIC-16 and an SMT-compatible vertical mount package and is capable of operating across both a wide voltage range (3.3 V to 5 V) and temperature range (?40?C to 105?C).APPLICATIONS Electronic stability control High performance platform stabilization

3-axis 1.5-12g accel Digital Output

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Small, Low Power, 3-Axis 2 g Accelerometer Features:3-axis sensingSmall, low profile package4 mm 4 mm 1.45 mm LFCSPLow power: 350 A typicalSingle-supply operation: 1.8 V to 3.6 V10,000 g shock survivalExcellent temperature stabilityBandwidth adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant

Nanopower, 3-Axis, 2 g/4 g/8 g Digital Output MEMS Accelerometer Features: Supply voltage range Single-cell battery operation: 1.1 V to 3.6 V Internal power supply regulation for high PSRR Ultralow power 0.89 μA at 100 Hz ODR, 2.0 V supply 180 nA motion activated wake-up mode 40 nA standby current High resolution: 0.25 mg/LSB Built-in features for system level power savings Single-tap and double-tap detection with only 35 nA of added current Adjustable threshold sleep and wake-up modes for motion activation Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely Deep 512 sample embedded FIFO minimizes host processor load Awake state output enables implementation of motion activated switch Low noise to 170 μg/√Hz Acceleration sample synchronization via external trigger On-chip temperature sensor Internal two-pole antialias filter SPI (4-wire) and I2C digital interfaces Small and thin 2.2 mm × 2.3 mm × 0.87 mm package

Micropower, 3-Axis, 400 g, Digital Output, MEMS Accelerometer Features: ±400 g measurement range 160 Hz to 2560 Hz user selectable bandwidth with 4-pole antialiasing filter Selectable oversampling ratio Adjustable high-pass filter Ultra Low power Power can be derived from a coin cell battery 19 μA at 2560 Hz ODR, 2.5 V supply Low power wake-up mode for low g activity detection 1.4 μA instant on mode with adjustable threshold 0.1 μA standby mode Built-in features for system level power savings Autonomous interrupt processing without processor intervention Ultra low power event monitoring: detects impacts and wakes up fast enough to capture the transient events Adjustable low g threshold activity and inactivity detection Wide operating voltage range: 1.6 V to 3.5 V Acceleration sample synchronization via external trigger SPI digital interface and I2C interface format support 12-bit output at 200 mg/LSB scale factor Wide temperature range: −40°C to +105°C Small, thin 3.00 mm × 3.25 mm × 1.06 mm package

MEMS ACCELEROMETERS;

ACCELEROMETER, 3AXIS, 13BIT, 8G, 16LGA; MEMS Sensor Output: Digital; Measurement Axis: X, Y, Z; Acceleration Range: ± 1g, ± 2g, ± 4g, ± 8g; Supply Voltage Min: 2V; Supply Voltage Max: 3.6V; Sensor Case Style: LGA; No. of Pins: 16Pins; Sensitivity Typ: 512LSB/g, 256.8LSB/g, 128LSB/g, 64LSB/g; Sensitivity Min: 473.6LSB/g, 236.8LSB/g, 118.4LSB/g, 59.2LSB/g; Sensitivity Max: 550.4LSB/g, 275.2LSB/g, 137.6LSB/g, 68.8LSB/g; Product Range: ADXL350 Series; Automotive Qualification Standard: -; MSL: MSL 3 - 168 hours; SVHC: No SVHC (07-Jul-2017); IC Interface Type: I2C, SPI; Operating Temperature Max: 85°C; Operating Temperature Min: -40°C; Operating Temperature Range: -40°C to +85°C; Sensitivity Per Axis: 512LSB/g, 256LSB/g, 128LSB/g, 64LSB/g; Supply Voltage Range: 2V to 3.6V

The ADXL325 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±5 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL325 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

The ADXL326 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±16 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL326 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).