The ADXL322 is an ultra small package (4 × 4 × 1.45 mm LFCSP) and low power (340 µA at VS = 2.4V) ± 2 g iMEMS® accelerometer designed to accommodate the integration requirements of mobile phones and other portable devices for a variety of motion, tilt, and inertial sensing features (e.g., data entry, menu and display control, power management, situational awareness, navigation, and portrait vs. landscape display orientation). The ADXL322 also enables hard disk drive protection systems and security features in notebook computers, as well as position and tilt sensing for PC and gaming peripherals such as mouse and joystick devices.APPLICATIONS Cost Sensitive Motion- and Tilt-Sensing Applications Mobile Phones Hard Disk Drive Protection Gaming User Interface Peripherals Sports and Health Related Devices

MEMS ACCELEROMETER, X/Y/Z, ANALOGUE, LCC;

MEMS ACCELEROMETERS;

The ADIS16136 iSensor® MEMS Gyroscope is a high performance, digital gyroscope sensing system that operates autonomously and requires no user configuration to produce accurate rate sensing data. It provides performance advantages with low noise density, wide bandwidth, and excellent in-run bias stability, which are enablingfor applications such as platform control, navigation, robotics,and medical instrumentation.This sensor system combines industry leading iMEMS® technology with signal conditioning that optimizes dynamic performance.The factory calibration characterizes the entire sensor signal chainfor sensitivity and bias over a temperature range of −40°C to +85°C.As a result, each ADIS16136 has its own unique correction formulasto produce accurate measurements upon installation. Forsome systems, the factory calibration eliminates the need forsystem level calibration and greatly simplifies it for others.The ADIS16136 provides data at rates of up to 2048 SPS andoffers an averaging/decimation filter structure for optimizingnoise/bandwidth trade-offs. The serial peripheral interface (SPI)and user register structure provide easy access to configurationcontrols and calibrated sensor data for embedded processorplatforms.The 36 mm × 44 mm × 14 mm package provides four holes forsimple mechanical attachment, using M2 (or 2-56 standard size)machine screws along with a standard 24-pin, dual row, 1 mmpitch connector that supports electrical attachment to a printedcircuit board (PCB) or cable system. The ADIS16136 providesan operating temperature range of −40°C to +85°C.APPLICATIONS Precision instrumentation Platform stabilization and control Industrial vehicle navigation Downhole instrumentation Robotics

The ADIS16485 iSensor® device is a complete inertial system thatincludes a triaxial gyroscope and a triaxial accelerometer. Eachinertial sensor in the ADIS16485 combines industry-leadingiMEMS® technology with signal conditioning that optimizesdynamic performance. The factory calibration characterizeseach sensor for sensitivity, bias, alignment, and linear acceleration(gyroscope bias). As a result, each sensor has its own dynamiccompensation formulas that provide accurate sensor measurements.The ADIS16485 provides a simple, cost-effective method forintegrating accurate, multiaxis inertial sensing into industrialsystems, especially when compared with the complexity andinvestment associated with discrete designs. All necessary motiontesting and calibration are part of the production process at thefactory, greatly reducing system integration time. Tight orthogonalalignment simplifies inertial frame alignment in navigation systems.The SPI and register structure provide a simple interface fordata collection and configuration control.The ADIS16485 uses the same footprint and connector systemas the ADIS16375 and the ADIS16488A, which greatlysimplifies the upgrade process. It comes in a module that isapproximately 47 mm × 44 mm × 14 mm and has a standardconnector interface.Applications Platform stabilization and control Navigation Personnel tracking Instruments Robotics

The ADIS16488A iSensor® device is a complete inertial systemthat includes a triaxis gyroscope, a triaxis accelerometer, triaxismagnetometer, and pressure sensor. Each inertial sensor in theADIS16488A combines industry-leading iMEMS® technologywith signal conditioning that optimizes dynamic performance.The factory calibration characterizes each sensor for sensitivity,bias, alignment, and linear acceleration (gyroscope bias). As aresult, each sensor has its own dynamic compensation formulas thatprovide accurate sensor measurements.The ADIS16488A provides a simple, cost-effective method forintegrating accurate, multiaxis inertial sensing into industrialsystems, especially when compared with the complexity andinvestment associated with discrete designs. All necessary motiontesting and calibration are part of the production process at thefactory, greatly reducing system integration time. Tight orthogonalalignment simplifies inertial frame alignment in navigation systems.The SPI and register structure provide a simple interface fordata collection and configuration control.The ADIS16488A uses the same footprint and connector system asthe ADIS16375, ADIS16480, and ADIS16485, which greatlysimplifies the upgrade process. The ADIS16488A is packaged ina module that is approximately 47 mm × 44 mm × 14 mm andincludes a standard connector interface.Applications Platform stabilization and control Navigation Personnel tracking Instrumentation Robotics

The ADXL375 is a small, thin, 3-axis MEMS accelerometer that provides low power consumption and high resolution measurement up to ±200 g. The digital output data is formatted as 16-bit, twos complement data and is accessible through a SPI (3- or 4-wire) or I2C digital interface.An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption.Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.The ADXL375 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead LGA.APPLICATIONS Concussion and head trauma detection High force event detection

The ADIS16375 iSensor® is a complete inertial system that includesa triaxis gyroscope and triaxis accelerometer. Each sensor in theADIS16375 combines industry-leading iMEMS® technologywith signal conditioning that optimizes dynamic performance.The factory calibration characterizes each sensor for sensitivity,bias, alignment, and linear acceleration (gyro bias). As a result,each sensor has its own dynamic compensation formulas thatprovide accurate sensor measurements over a temperaturerange of −40°C to +105°C.The ADIS16375 provides a simple, cost-effective method forintegrating accurate, multiaxis, inertial sensing into industrialsystems, especially when compared with the complexity andinvestment associated with discrete designs. All necessary motiontesting and calibration are part of the production process at thefactory, greatly reducing system integration time. Tight orthogonalalignment simplifies inertial frame alignment in navigation systems.An improved SPI interface and register structure provide fasterdata collection and configuration control.This compact module is approximately 44 mm × 47 mm × 14 mmand provides a flexible connector interface that enables multiplemounting orientation options.Applications Precision instrumentation Platform stabilization and control Industrial vehicle navigation Downhole instrumentation Robotics

The ADXRS624 is a complete angular rate sensor (gyroscope) that uses the Analog Devices, Inc., surface-micromachining process to create a functionally complete and low cost angular rate sensor integrated with all required electronics on one chip. The manufacturing technique for this device is the same high volume BiMOS process used for high reliability automotive airbag accelerometers.The ADXRS624 is an automotive grade gyroscope. Automotive grade gyroscopes have more extensive guaranteed min/max specifications due to automotive testing.The output signal, RATEOUT (1B, 2A), is a voltage proportional to angular rate about the axis normal to the top surface of the package. The output is ratiometric with respect to a provided reference supply. A single external resistor between SUMJ and RATEOUT can be used to lower the scale factor. An external capacitor sets the bandwidth. Other external capacitors are required for operation. A temperature output is provided for compensation techniques. Two digital self-test inputs electromechanically excite the sensor to test proper operation of both the sensor and the signal conditioning circuits. The ADXRS624 is available in a 7 mm × 7 mm × 3 mm BGA chip scale package.APPLICATIONS Navigation systems Inertial measurement units Platform stabilization Robotics

The ADXL325 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±5 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL325 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).