Dual 3 MHz, 1200mA Buck Regulator with Two 300 mA LDOs Features: Main input voltage range: 2.3 V to 5.5 V Two 1200 mA buck regulators and two 300 mA LDOs 24-lead, 4 mm × 4 mm LFCSP or 28-lead TSSOP package Regulator accuracy: ±1.8% Factory programmable or external adjustable VOUTx 3 MHz buck operation with forced PWM and auto PWM/PSM modes BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V LDO1/LDO2: output voltage range from 0.8 V to 5.2 V LDO1/LDO2: input supply voltage from 1.7 V to 5.5 V LDO1/LDO2: high PSRR and low output noise

2 A/1.2 A DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 2.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 1.2 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

28 V, 200 mA, Low Noise, Linear Regulator Features: Low noise: 18 μV rms Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3 V Positive or negative enable logic Stable with small 2.2 μF ceramic output capacitor Input voltage range: −2.7 V to −28 V Maximum output current: −200 mA Low dropout voltage: −185 mV at −200 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature +2% maximum/−3% minimum Low quiescent current, IGND = −650 μA with −200 mA load Low shutdown current: −2 μA Adjustable output from −1.22 V to −VIN + VDO Current-limit and thermal overload protection 6- and 8-lead LFCSP and 5-lead TSOT Supported by ADIsimPower tool

Ultra-Low-Noise, High-Accuracy 4.096V Voltage Reference Features: Maximum temperature coefficient (TCVOUT): 0.8 ppm/°C (D grade 0°C to 70°C) 1 ppm/°C (C grade 0°C to 70°C) 2 ppm/°C (B grade −40°C to +125°C) 4 ppm/°C (A grade 40°C to +125°C) Output noise (0.1 Hz to 10 Hz): 1 μV p-p at VOUT of 2.048 V typical Initial output voltage error: B, C, D grade: ±0.02% (maximum) Input voltage range: 3 V to 15 V Operating temperature: A grade and B grade: −40°C to +125°C C grade: 0°C to +70°C Output current: +10 mA source/−10 mA sink Low quiescent current: 950 μA (maximum) Low dropout voltage: 300 mV at 2 mA (VOUT ≥ 3 V) 8-lead SOIC package and LCC package AEC-Q100 qualified for automotive applications Long-term drift: 8 ppm typical at 4500 hours

Microprocessor Supervisory Circuit Features:Pin-compatible with MAX1232 and Dallas DS1232Adjustable precision voltage monitor with 4.5 V and 4.75 V optionsAdjustable strobe monitor with 150 ms, 600 ms, or 1.2 sec optionsNo external componentsSpecified from 40C to +85C

Microprocessors Supervisory Circuit in 4-Lead SOT-143, Logic Low RESET Bar Output Features: Superior upgrade for MAX811/MAX812 Specified over temperature Low power consumption: 5 μA typical Precision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V options Reset assertion down to 1 VCC Power-on reset: 140 ms minimum Logic low RESET output Built-in manual reset

Power Management IC Development Tools LT4356CDE-2 Demo - Overvoltage Protectio

Power Management IC Development Tools LTM4614EV Demo Board - Low Voltage, Dual

The LTC3423 and LTC3424 are high efficiency, fixed frequency, step-up DC/DC converters that can regulate output voltages as low as 1.5V from a single cell. An applied voltage of at least 2.7V to the VDD pin is required to power the internal control circuitry.The devices include a 0.16Ω N-channel MOSFET switch and a 0.21Ω P-channel synchronous rectifier. The LTC3423 is intended for applications requiring less than 0.75W of output power and the LTC3424 for 1.5W or less. Switching frequencies up to 3MHz are programmed with an external timing resistor and the oscillator can be synchronized to an external clock.Quiescent current is only 38µA in Burst Mode operation, maximizing battery life in portable applications. Burst Mode operation is user controlled and can be enabled by driving the MODE/SYNC pin high. If the MODE/SYNC pin has either a clock or is driven low then the operation is at constant fixed frequency.Other features include a 1µA shutdown, thermal shutdown and current limit. The LTC3423 and LTC3424 are available in the 10-lead MSOP package. For applications requiring an output voltage greater than 2.6V, the LTC3401 and LTC3402 are recommended without the need of a separate voltage for the VDD pin.Applications Pagers Handheld Instruments Cordless Phones Wireless Handsets GPS Receivers Battery Backup