Low Cost, Low Power, True RMS-to-DC Converter Features: Converts an ac voltage waveform to a dc voltage and then converts to the true rms, average rectified, or absolute value 200 mV rms full-scale input range (larger inputs with input attenuator) High input impedance: 1012 Ω  Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: +2.8 V, −3.2 V to ±16.5 V Low power: 200 μA maximum supply current Buffered voltage output No external trims needed for specified accuracy Related device: the AD737 features a power-down control with standby current of only 25 μA; the dc output voltage is negative and the output impedance is 8 kΩ

3 V, Voltage Monitoring Microprocessor Supervisory Circuit Features: Guaranteed RESET valid with VCC = 1 V 190 μA quiescent current Precision supply voltage monitor 4.40 V (ADM706/ADM708) 200 ms reset pulse width Debounced TTL/CMOS manual reset input (MR) Independent watchdog timer (ADM705/ADM706) 1.60 sec timeout (ADM705/ADM706) Voltage monitor for power fail or low battery warning Superior upgrade for MAX705 to MAX708

Ultralow Noise, 200 mA, Linear Regulator Features: PSRR performance of 54 dB at 100 kHz Ultralow noise independent of VOUT 3 μV rms, 0.1 Hz to 10 Hz 9.5 μV rms, 0.1 Hz to 100 kHz 9 µV rms, 10Hz to 100KHz 17 µV rms, 10Hz to 1MHz Low dropout voltage: 150 mV at 200 mA load Maximum output current: 200 mA Input voltage range: 2.2 V to 5.5 V Low quiescent and shutdown current Initial accuracy: ±1% Accuracy over line, load, and temperature: −2.5%/+1.5% 5-lead TSOT package and 6-lead LFCSP package

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

LT1766 series DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board

Ultralow Noise XFET 2.048V Voltage Reference w/Current Sink and Source Capability Features: Low noise (0.1 Hz to 10.0 Hz): 3.5 μV p-p @ 2.500 V output No external capacitor required Low temperature coefficient A Grade: 10 ppm/°C maximum B Grade: 3 ppm/°C maximum Load regulation: 15 ppm/mA Line regulation: 20 ppm/V Wide operating range ADR430: 4.1 V to 18 V High output source and sink current: 30 mA and −20 mA Wide temperature range: −40°C to +125°C

High Precision Shunt Mode Voltage Reference (3.0 V) Features: Ultracompact SC70 and SOT-23-3 packages Temperature coefficient: 40 ppm/°C (maximum) 2× the temperature coefficient improvement over the LM4040 Pin compatible with LM4040/LM4050 Initial accuracy: ±0.2% Low output voltage noise: 14 μVP-P @ 2.5 V output No external capacitor required Operating current range: 50 μA to 15 mA Industrial temperature range: −40°C to +85°C

SUPERVISOR CIRCUIT MPU #1 SC-70-4; Threshold Voltage:2.32V; No. of Supervisors / Monitors:1Monitors; Supply Voltage Min:1.2V; Supply Voltage Max:5.5V; Reset Type:Active-Low Push-Pull; Digital IC Case:SC-70; No. of Pins:4Pins; Delay Time:240ms; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Cut Tape; Product Range:ADM6711 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

VOLTAGE REF SERIES 5V NSOIC-8; Voltage Reference Type:Series - Fixed; Product Range:ADR4550 Series; Reference Voltage:5V; Initial Accuracy:0.04%; Temperature Coefficient:± 4ppm/°C; Voltage Reference Case Style:SOIC; No. of Pins:8Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Base Number:4550; Input Voltage:3V to 15V; Input Voltage Max:15V; Input Voltage Min:3V; Operating Temperature Range:-40°C to +125°C; Reference Volt Tolerance ±%:0.04%; Reference Volts:5V; Topology:Series

Microprocessor Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, Active Low Reset and 100mA Output Current Features: Superior Upgrade for MAX690–MAX695 Specified Over Temperature Low Power Consumption (5 mW) Precision Voltage Monitor Reset Assertion Down to 1 V VCC Low Switch On-Resistance 1.5 O Normal, 20 O in Backup High Current Drive (100 mA) Watchdog Timer—100 ms, 1.6 s, or Adjustable 600 nA Standby Current Automatic Battery Backup Power Switching Extremely Fast Gating of Chip Enable Signals (5 ns) Voltage Monitor for Power Fail